Categories

Best Usb Camera For Raspberry Pi 4

Raspberry Pi HQ Camera Module with Case for Raspberry Pi 4B/3B+/3B/2B/A+/Zero/W/Zero WH,12.3MP IMX477 Sensor Support C- and CS-Mount Lenses, Alternative for Raspberry Pi Camera Module V2 (8 Items)

  • This Raspberry Pi High Quality Camera is the latest camera board from Raspberry Pi Foundation.It is compatible with All Raspberry Pi series boards (Raspberry Pi 4B/3B+/3B/2B/A+/Zero/Zero W/Zero WH,etc.).
  • Higher Resolution & Sensitivity Camera Module---Compared To 8MP Of Normal Raspberry Camera, The High Quality Camera Offers Up To 12.3MP, Along With Nearly 50% Greater Area Per Pixel, Delivering Better Imaging Effect..
  • It adopts the IMX477R sensor, and requires a C- or CS-mount lens to work..
  • It could be an ideal alternative for the Raspberry Pi Camera Module V2. It suits industrial and consumer applications like security camera, and other specialist optical devices which require higher level of visual fidelity..
  • Package Content: 1.Raspberry Pi High Quality Camera main unit. 2.C-CS adapter. 3.Dust cap. 4.FPC ribbon. 5.Screwdriver. 6.Packing box. 7.Raspberry Pi Zero V1.3 Camera Cable 15cm. 8.Raspberry Pi Camera Matching Case..
Check Stock

Arducam 16MP Autofocus Quad-Camera Kit for Raspberry Pi, 16MP IMX519 Autofocus Synchronized Raspberry Pi Camera, Compatible with Nvidia Jetson Nano/Xavier NX

  • Designed for Raspberry Pi Camera: This Quad- Camera kit allows you to connect four 16MP IMX519 raspberry pi cameras to a single standard pi board and capture images or video at the same time..
  • Four in One: Combine four cameras into one frame, each with a resolution of 1/4.
  • the maximum output you can get: 4656 x 3496 for still images and 1920x1080 for video. Please note the frame rate for video and still images will drop to half the frame rate you would normally get with a single camera..
  • Wide compatibility: It is compatible with the latest Raspberry Pi camera software (libcamera) and uses the official Pi camera tuning algorithm. It also supports multi-platform multi-camera solutions such as Raspberry Pi, Jetson Nano, Xavier NX and many more. And this Camarray HAT is also compatible with Raspberry Pi 3 and Raspberry Pi (V1/V2/HQ) cameras..
  • Applications: Multiple camera processing technologies have enabled VR (Virtual Reality), AR(Augmented Reality), and other applications like SLAM (Simultaneous Localization and Mapping). Synchronized video streams with Raspberry Pi could be used for many use-cases (e.g., stitching, 3D sensing, tracking, …) before investing in an expensive video multiplexer hardware..
  • Please note: The cameras in the set are specifi....
Check Stock

Smraza Case for Raspberry Pi 4 Model B, Acrylic Case with Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4B (RPI 4 Board Not Included) - Black and Clear

  • NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: This case is not suitable for raspberry pi 3..
  • EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
  • KEEP RASPBERRY PI 4 B COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
  • CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
  • 100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Pi 4B Case with Quiet Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B 8GB/4GB/2GB - Black

  • NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal.
  • EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
  • KEEP RASPBERRY PI 4 COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
  • CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
  • 100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
Check Stock

Arducam Raspberry Pi HQ Camera for Raspberry Pi, 12.3MP IMX477 High Sensitivity CMOS with C-CS Adapter and Tripod Mount for Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W

  • High Quality Camera: Compared with Raspberry Pi Camera Module V2, this camera module offers higher resolution, up to 12.3MP. Also adopting 12.3MP IMX477 sensor for shape image, resolution 4056*3040 pixels, frame rate 30 fps@1080p, 60fps@720p, VGA90 video modes, IR Sensitivity..
  • Wide Compatibility: The IMX477 camera module is not only compatible with all models of Raspberry Pi 1, 2, 3 and 4, but also with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration. Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).
  • Easy to Setup: Only a driver away from Plug-and-Play, just use the 15-22pin FPC Cable included in the package to connect the Raspberry Pi 4B/3B and camera. If you connect with the Raspberry Pi Zero and Zero W2, the 22-22pin FPC cable is needed..
  • Package included: Come with a C-CS adapter that supports the use of C-mount and CS-mount lenses. It also includes a tripod adapter that is compatible with any tripod with standard 1/4"-20 mounting screws, this allows the camera to be secured anywhere you want..
  • Application: This Raspberry Pi HQ camera can be used to monitor 3D printer, and many other vis....
Check Stock

Raspberry Pi 4 Computer Model B 8GB Single Board Computer Suitable for Building Mini PC/Smart Robot/Game Console/Workstation/Media Center/Etc.

  • powful cputhe cpu of the raspberry pi 4 model b adopts the latest arm cortex-a72 architecture, which is also used in high-performance smartphones, and has evolved into a real pc.the operating clock has been changed from pi3's 1.2ghz to 1.5ghz, and the speed has become a different dimension with the updated architecture..
  • video output/gputhe on-board gpu of the raspberry pi 4 supports 4kp@60 and newly supports h.265 decoding, opengl es 3.0, etc.as for the video output, two micro hdmis with smaller connectors are installed, and the raspberry pi 4 also supports dual screen output..
  • usb 3.0with a new soc, the speed of the raspberry pi 4 around i/o has been improved, and finally usb 3.0 is supported.usb boot is faster and more convenient..
  • network&bluetoothgigabit ethernet (wired lan) has also been significantly speeded up from 300mbps of pi 3b + to 1000mbps (logical value).in addition, bluetooth supported version has been upgraded to 5.0, and the transfer speed of pi 4 has been doubled..
  • power input connectorthe power input connector of the raspberry pi 4 has been changed to usb type c. it is easier to use than micro usb and can supply a larger current reliably.the power requirement of raspberry pi 4 model b is 5v 3.0a, which is higher than the previous....
Check Stock

Geekworm X820 V3.0 2.5“ SATA HDD/SSD Storage Expansion Board, USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 B+/3B/ROCK64/Tinker Board&2.5 Inch SATA HDD/SSD

  • ✔ Please use this high quality certified DC 5V 4A power supply(ASIN :B07413Q5Y4).Power supply request: 5Vdc +/-5% , 4A.
  • The power adapter not only powers Raspberry Pi board but also powers your SSD or HDD. If the power is low, the SSD/HDD may not be identified or damage your RPi or X820 board. [Do Not Use ASIN:B01K0608A0!!!].
  • ✔ Raspberry Pi SATA X820 V3.0 HDD/SSD USB3.0 shield expansion board provides an complete storage solution for Raspberry Pi motherboard/ROCK64, Support up to 4TB 2.5 inch SATA interface hard disk drives (HDD) / solid-state drive (SSD). A good raspberry pi sata adapter for Raspberry Pi 3B+, 3B, 2B, B+, ROCK64. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
  • For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
  • ✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
  • User manual, pls refer to Geekworm WiKi search(X820)..
  • ✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
  • Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices,....
Check Stock

Arducam Raspberry Pi HQ Camera, 12.3MP IMX477 Camera Module with CS-Mount Lens, Automatic IR-Cut Switching All-Day Image, Compatible with Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W

  • Raspberry Pi HQ Camera: This camera module offers higher resolution, up to 12MP, which can deliver better image quality than 8MP. Also adopting IMX477 sensor for shape image, resolution 4056*3040 pixels, frame rate 30 fps@1080p, 60fps@720p, VGA90 video modes, IR Sensitivity..
  • IR-Cut：The camera can switch IR-CUT filter in and out automatically, supports both day and night vision. which can keep you all-day image..
  • Wide Compatibility: The IMX477 camera module is not only compatible with all models of Raspberry Pi 1, 2, 3 and 4, but also with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration..
  • Package included: Come with a CS-Mount lens and two cables, 300mm 15-22 pin cable for Pi 1-4 connection and 300mm 22-22 pin cable for Pi 0 and Compute Module connection. Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).
  • Application: This Raspberry Pi HQ camera can be used to monitor 3D printer, and many other vision applications demand IMX477 camera. It can also serve for Artificial Intelligence, like facial recognition, high-speed capturing and so on..
Check Stock

Geekworm Raspberry Pi 4 Case, Raspberry Pi 4 Heatsink Aluminum Alloy Passive Cooling Case (P330)

  • 【Passive Cooling Aluminum Alloy Case】Geekworm Raspberry Pi 4 Case - P330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
  • Cool your Raspberry Pi 4 without fans and noise..
  • 【Add Copper Heatsink for Better Cooling】Equipped with a CPU copper heatsink(to replace the thermal pad) to attach with CPU grease on CPU of Pi4 for better heat dissaption (Not include CPU grease).
  • 【High Quality Aluminum Material】Sturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage..
  • 【Easy Access to Raspberry Pi 4 Ports】Easy installation. Easy access to all Raspberry Pi 4 ports, such as GPIO, Micro HDMI, TF Card, USB-C Power Supply ".
  • 【Packing List】1 x Raspberry Pi 4 Aluminum Alloy Case, 1 x Copper Heatsink, 1 x Screws Pack 【Note】NOT include raspberry pi board.
Check Stock

Wired USB N64 Controller, FISUPER Classic Video Game Controller USB Gamepad for Windows PC MAC Raspberry PI Retropie (Gray)

  • 1.【Wide Compatibility】: This is USB controller, compatible with the devices with USB port, such as: PC, Notebook Computer, Laptop Computer.
  • Android Smartphone: connect via an USB OTG cable.
  • Raspberry Pi (RPI, Raspberry pie): Raspberry Pi 1 Model B, Model A, Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi 2, Raspberry Pi 3 Model B, Raspberry Pi 3, Retro Pie. — Note: NOT SUPPORT Android TV BOX..
  • 2.【Supported Operation System】: Windows 98, ME, Vista, 2000, 2003, XP, 7, 8, 8.1, 10.
  • Linux UBUNTU, Linux Mint, Android Linux (via an USB OTG cable).
  • Retrogaming operating systems: RetroPie, Recalbox, Happi Game Center, Lakka, ChameleonPi, Piplay..
  • 3.【USB Gamepad for N64 Games】: it is specially designed for n64 games, you can download the emulator that you want to use. Supported Game Emulators: Current: Project64, 1964, MAME (MESS), Mupen64Plus, Sixtyforce, CEN64.
  • Historical: Project Unreality, Corn, UltraHLE, Nemu64.
  • 4.【Sensitive and Accurate】: This N64 controller features 14 function buttons (including Left and Right shoulder functions and Z-trigger) and 1 analog joystick.These sensitive and accurate little things will ensure you a perfect control and performance in every game operation..
Check Stock

Smraza Case for Raspberry Pi 4 Model B, Pi 4B Case with Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply, USB Card Reader, 6 Feet Micro HDMI Cable, 7.8 Inch Micro HDMI to HDMI Adapter Cable (4K Ultra HD)

  • Upgrade Raspberry Pi 4 Case - Acrylic 9 Layers Case for Raspberry Pi 4 Model B (Raspberry Pi 4 Board Not Included) with Good Appearance. It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot..
  • Pi 4 Case with Better Cooling System - Raspberry pi 4 quite cooling fan and 4 pcs aluminum heat sinks are good for heat dissipation of Raspberry Pi board..
  • Raspberry Pi 4 Power Supply with ETL Certification - ETL LISTED 3A USB-C power supply for Raspberry Pi 4. With on/off switch, it's convenience to power on and power off your RPI 4. Input: 100-240V AC, 50-60Hz, 0.8A. Output: 5V 3A. Cable length: 59 inch..
  • 6 feet/ 1.8 m Micro HDMI to HDMI Cable for Raspberry Pi 4 - Up to 4K Resolution. Up to 60P (Frames/Second). CEC Support. Also come with a 7.8 inch Micro HDMI to HDMI Adapter Cable..
  • 100% Customer Satisfaction Guaranteed. If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution..
Check Stock

Wired USB N64 Controller, FISUPER Classic Video Game Controller USB Gamepad for Windows PC MAC Raspberry PI Retropie (Clear Blue)

  • 1.【Wide Compatibility】: This is USB controller, compatible with the devices with USB port, such as: PC, Notebook Computer, Laptop Computer.
  • Android Smartphone: connect via an USB OTG cable.
  • Raspberry Pi (RPI, Raspberry pie): Raspberry Pi 1 Model B, Model A, Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi 2, Raspberry Pi 3 Model B, Raspberry Pi 3, Retro Pie. --- Note: NOT SUPPORT Android TV BOX..
  • 2.【Supported Operation System】: Windows 98, ME, Vista, 2000, 2003, XP, 7, 8, 8.1, 10.
  • Linux UBUNTU, Linux Mint, Android Linux (via an USB OTG cable).
  • Retrogaming operating systems: RetroPie, Recalbox, Happi Game Center, Lakka, ChameleonPi, Piplay..
  • 3.【USB Gamepad for N64 Games】: it is specially designed for n64 games, you can download the emulator that you want to use. Supported Game Emulators: Current: Project64, 1964, MAME (MESS), Mupen64Plus, Sixtyforce, CEN64.
  • Historical: Project Unreality, Corn, UltraHLE, Nemu64.
  • 4.【Sensitive and Accurate】: This N64 controller features 14 function buttons (including Left and Right shoulder functions and Z-trigger) and 1 analog joystick.These sensitive and accurate little things will ensure you a perfect control and performance in every game operation..
Check Stock

Vilros Raspberry Pi 4 Compatible Use and Store Accessory Set (Black)

  • INCLUDES: Use and Store Case (Black)--Vilros Raspberry Pi 4 Compatible Power Supply--Vilros 1.8M HDMI-MIcro HDMI Cable--Vilros Heatsink for Pi 4 (Set of 4)--Vilros Raspberry Pi 4 Quick Start Ebook Download Code--Screwdriver and Screws--DOES NOT INCLUDE A RASPBERRY PI MOTHERBOARD.
  • USE AND STORE: Designed for the Raspberry Pi 4 the Use and store case makes it easy to use your pi as well as store all your accessories when not in use--the case also features a preinstalled fan that is easily connected to the Pi.
  • POWER SUPPLY :The Vilros USB-C 5.1V 3A Power Supply was Designed for the Raspberry Pi 4 and Features a 5FT cable with an Inline ON/OFF Switch to make it easy to turn the Pi on and off.
  • HDMI-MICRO HDMI CABLE: The Vilros 1.8M HDMI/Micro HDMI Cable will connect your Raspberry Pi 4 Board to any HDMI monitor.
  • EASY TO SET UP: Includes a EBOOK download code for the Vilros Raspberry Pi Quickstart Guide 2nd Edition (Updated for Pi 4) --also includes a screwdriver, screws and clear instructions for assembly..
Check Stock