Categories

Best Usb Interface Support

DGZZI USB to PS2 Adapter 2PCS Purple USB Female to PS/2 Male Converter Adapter for Mouse and Keyboard

  • This USB female to PS/2 male adapter can easily switch between PS/2 and USB interfaces, which is very practical..
  • When your computer does not have many USB ports, a USB to PS/2 adapter can help you easily connect to the computer..
  • The USB interface is only used to connect a computer mouse or keyboard, and cannot be connected to other devices..
  • Please note: the computer ps/2 interface does not support hot swap! Turn off the computer before use, plug it in and turn it on again!.
  • Mouse USB interface to PS2 interface adapter, suitable for: desktop or notebook USB interface is not enough, or the use of USB interface mouse is unstable, you can convert the mouse own USB interface to PS2 interface for use, or save one for the computer USB port..
Check Stock

Yahboom 4 Port USB 3.0 Hub for Raspberry Pi Jetson Nano ROS Robot, Compatible with USB 3.0/2.0/1.1 Driver-Free Plug&Play, Onboard External USB-A，5V (Micro-USB)，9~24V Power Port, for High-Power Device

  • VL817 main control chip -- USB3.0 HUB expansion board aims to solve the problems of insufficient USB interface on the main board and insufficient power supply caused by the increase of USB peripherals.Equipped with VL817 main control chip scheme, the main control board performance is stable and the transmission is stable and safe. It uses USB3.0 communication interface and HUB chip expand 4 USB interfaces to ensure high-speed data transmission of the interface..
  • 1 to 4 data extension -- The expansion efficiency of the four ports is doubled and Each USB device has an independent indicator light. Built in over current protection, short circuit protection and power reverse connection protection circuit to ensure the safe use of USB devices..
  • Support wide voltage external power supply -- In addition to the USB-A standard data interface power supply, this product also supports 5V (micro-USB), 9~24V (DC interface/XH2.54 socket) wide-voltage external power supply. Even if multiple high-power peripherals are connected at the same time, the stability of power supply and signal transmission can be guaranteed..
  • Support equipment -- Support ROS robot / car, Raspberry Pi / Jetson series board, PC, other boards, industrial computer, etc. Compatible with win7 / 8 / 10....
Check Stock

DGZZI USB to PS2 Adapter 2pcs Green PS/2 Female to USB Male Converter Adapter for Mouse and Keyboard

  • This USB male to PS/2 female adapter can easily switch between PS/2 and USB interfaces, which is very practical..
  • When your computer does not have many USB ports, a USB to PS/2 adapter can help you easily connect to the computer..
  • The USB interface is only used to connect a computer mouse or keyboard, and cannot be connected to other devices. The product is of good quality and can be easily installed without a software driver..
  • Please note: The ps/2 interface of the computer does not support hot plugging! Before using the computer, turn it off, then plug it in and turn it on again. This interface requires your device to be compatible with USB, and you need to ensure that your device has a chipset..
  • Mouse USB interface to PS2 interface adapter, suitable for: desktop or laptop USB interface is not enough, or USB interface mouse is unstable, you can convert the mouse’s own USB interface to PS2 interface for use, or save a USB port for the computer..
Check Stock

H61M Motherboard, 1155 Pin DDR3 Dual Channel Quad Core VGA HDMI Stable Power Computer Motherboard High Compatibility for Core I7 / I5 / I3 /Pentium/Celeron LGA1155

  • 【M-ATX Motherboard】- B75 M.2 motherboard supports M.2 high speed hard disk interface, round keyboard (PS/2 port). Gigabit Ethernet high quality 6 channel sound card, high speed and stable transmission..
  • 【Graphics Card】- High definition high performance core display graphics card, support VGA+HDMI+DVI dual output High compatibility brings a higher experience.
  • 【Expansion Slot】- Supported: 1 x PCI-EX16 graphics slot, 1 x PCI-EX1 slot, 1 x M.2 interface with NVME/SATA mode conversion jumper, 2 x USB2.0 pin, 1 x USB3.0 pin, 3 x SATA2.0 interface, 1xSATA3.0 interface..
  • 【Feature】- Support front and rear dual USB 3.0 ports, support SATA3.0 hard disk transfer rate. Support NVME+NGFF dual mode hard disk switching PCIE high speed channel + SATA2.0 channel free choice. M.2 high speed hard disk interface, maximum memory support 8G×2, 1155 pin CPU interface USB3.0 SATA3 support DDR3..
  • 【Satisfaction Service】- If you have any problems while using this product, please feel free to contact us immediately by email, we will serve you as soon as possible. For any questions related to product quality, we will exchange or refund for you in full, thank you for choosing us, thank you..
Check Stock

CAMOLA USB MIDI Host Box USB to MIDI Converter MIDI Interface

  • 【 MIDI Host Box 】 Provide 1-in and 1-out interface, convert the USB MIDI device interface of a musical instrument into a common 5-pin MIDI interface device..
  • 【 Excellent Compatibility 】This high speed Midi host box is compatible with all USB MIDI devices with USB1.0/1.1, MIDI Din compatible with all musical instruments with MIDI standard interface..
  • 【 Standard MIDI Channels and MIDI 5-pin Interface 】 High-performance FTP processing, with standard MIDI 16 channels and support MIDI SysEX commands, this midi host box can communicate all standard MIDI commands.
  • 【 Excellent LED Indicator 】 MIDI Host Box is with product power indicator, USB work indicator and MIDI input/output indicator, LED flashes when sending signal..
  • 【 Support Firmware Update 】There is update key, which supports firmware upgrade, compatibility upgrade for special MIDI devices..
Check Stock

USB C to C Cable (100W 5A) Typ-c PD Fast Charge Data Cable (6.6 feet Gray) + OTG USB to C Female 2.0 Adapter (Black) + OTG C to USB Female 3.0 Adapter (Black)(3 pcsPack)

  • Charging: Use compatible charger, support 100W quick charging. Suitable for Apple MacBook, Huawei Matebook, iPad Pro and more Type-c interface devices mobile phones and laptops.
  • Compatibility: It works with any USB-C tablet or phone.
  • Appearance: nylon braided and zinc alloy metal shell perfect combination, repeated strict test, prolong the service life.
  • OTG: 2.0 OTG support Usb interface to type-C interface charging and data, 3.0 OTG support Type-C interface to USB-A interface charging and data,.
  • .What you'll get: a brand new 6.6ft USB-C to USB-C charging cable and two Otg adapters.
Check Stock

Desktop Computer M-ATX Motherboard, DDR3 LGA1155 CPU for Intel B75 Mainboard, RTL8111H Gigabit Network Card, M.2 NVME+NGFF Dual-Mode, SATA3.0/USB3.0/6-Channel Audio Chip

  • 【M-ATX Motherboard】- B75 M.2 motherboard supports M.2 high speed hard disk interface, round keyboard (PS/2 port). Gigabit Ethernet high quality 6 channel sound card, high speed and stable transmission..
  • 【Graphics Card】- High definition high performance core display graphics card, support VGA+HDMI+DVI dual output High compatibility brings a higher experience.
  • 【Expansion Slot】- Supported: 1 x PCI-EX16 graphics slot, 1 x PCI-EX1 slot, 1 x M.2 interface with NVME/SATA mode conversion jumper, 2 x USB2.0 pin, 1 x USB3.0 pin, 3 x SATA2.0 interface, 1xSATA3.0 interface..
  • 【Feature】- Support front and rear dual USB 3.0 ports, support SATA3.0 hard disk transfer rate. Support NVME+NGFF dual mode hard disk switching PCIE high speed channel + SATA2.0 channel free choice. M.2 high speed hard disk interface, maximum memory support 8G×2, 1155 pin CPU interface USB3.0 SATA3 support DDR3..
  • 【Satisfaction Service】- If you have any problems while using this product, please feel free to contact us immediately by email, we will serve you as soon as possible. For any questions related to product quality, we will exchange or refund for you in full, thank you for choosing us, thank you..
Check Stock

MAIWO M.2 NVME/SATA SSD Enclosure Adapter Reader,USB 3.0&Type-C ,NVMe 10GBps, SATA 6GBps.Support M Key/B&M Key Solid Status Drive,Aluminum Shell, Tool Free, Support UASP, Size 2230/2242/2260/2280

  • 【Dual Interface USB3.0+Type-C】 MAIWO K1683P2 Hard Drive Enclosure with 2 interface design, the USB3.0 interface and Type-C interface. 2 interface for different devices. Tool free design, just plug and play. You can use USB3.0 to connect your computer or laptop which have USB3.0 interface, and the Type-C interface support connecting your phone(Your phone should support OTG Function ).
  • 【M.2 SATA &M.2 NVME】K1683P2 SSD adapter support both M.2 SATA and M.2 NVME hard drive. Cause the longer box design, it have better compatible with disks, support solid status drive size 2230/2242/2260/2280. It support M Key and B& M Key. The MAX bandwidth with M.2 SATA drive can reach 6Gbps, and with M.2 NVME drive,the MAX Bandwidth can be 10Gbps.
  • 【Multiple Compatible】MAIWO K1683P2 hard drive reader support most mainstream systems,such as MAC OS, Windows,Linux. It also support many devices. Phone, Smart TV,Phone,Router,XBOX,PS4. Without any Drive,any cable, just plug to play..
  • 【Aluminum alloy shell】The shell of K1683P2 have slim design, with the Aluminum alloy shell, the weight of hard drive Enclosure is very light. And the shell can protect your disk very well. And it have good heat dissipation performance.It is light in weight and small in size.so it is ve....
Check Stock

TechIntheBox 3 Ports OTG Cable Adapter,Micro USB Hub USB OTG Extension Adapter for Smartphone and Tablet Simultaneous Charging Power Transmisson Cable Black

  • 1. Small, lightweight and easy to carry. Just as the size of a pen shape, easy to carry, not the space. Micro USB interface, support hot-hot-plug....
  • 2. Supports OTG function and charge electricity. Compatibility, support for Android, win8, win7, Vista, XP, window 2000, ME, Linux and other operating....
  • 3. The mobile tablet are applicable, support Micro USB port phones, tablet PCs have OTG function, only cell phones, television set-top boxes. USB wide....
  • 4. Extraordinary material safety and environmental protection, environmental protection ABS shell with high-density material, non-toxic, safe....
  • 5. Standard Micro USB OTG interface cable, Micro USB interface for all common mobile phone must also support OTG function..
Check Stock

ASRock Intel H310 Chip with Micro ATX Motherboard H310 cm – Hdv/M. 2, H310CM-HDV/M.2

  • Gigabit Ethernet high quality 6 channel sound card, high speed and stable transmission. Support front and rear dual USB 3.0 ports, support SATA3.0 hard disk transfer rate..
  • B75 M.2 motherboard supports M.2 high‑speed hard disk interface, round keyboard (PS 2 port)..
  • High definition high performance core display graphics card, support VGA+HDMI+DVI dual output High compatibility brings a higher experience..
  • Support NVME+NGFF dual mode hard disk switching PCIE high speed channel + SATA2.0 channel free choice..
  • M.2 high speed hard disk interface, maximum memory support 8G×2, 1155 pin CPU interface USB3.0 SATA3 support DDR3..
Check Stock

Cotchear Mini USB 2.0 Card Reader Micro SD Card Adapter for TF/Microsd Cards Reading High Speed Cardreader with Plastic Lid Key Ring (Black)

  • ▶ Material: aluminum alloy + PC plastic.
  • Integrated card slot to avoid repeated plugging and unplugging, protecting the card slot.
  • ▶ Interface Type: USB interface + micro SD ( TF ) card interface. Support: for Micro SD, for Micro SDHC, for Micro SDXC memory card.
  • ▶ Interface Standards: USB 2.0, USB 1.1, USB 3.0.
  • Support all kinds of car USB songs play, USB 2.0 high-speed transmission, high speed up to 480 Mbps. .
  • ▶ Product Size: 25 mm * 18 mm * 9mm/1.02 * 0.73 * 0.35 in.
  • The height of the card reader is only 25 mm, as light as a feather, and it is small but useful.
  • ▶ This micro SD card reader has chain attach to it and you can use the chain to hang the card reader on you keyring for portable..
Check Stock

Cablecc USB 3.0 to Micro SD SDXC TF Card Reader with Micro Type-C USB-C OTG Adapter for Tablet/Cell Phone…

  • with Micro Type-C USB-C OTG Adapter for Tablet / Cell Phone.
  • USB 3.0 interface. High speed data transfer up tp 5 Gbps. Powers via USB port, no additional power supply needed..
  • Compatible for Windows ME,2000,XP,Vista,WIN 7 and Mac OS with USB interface. Card Compatibility: MICRO SD/SDXC/TF card.
  • This OTG Adapter is compatible with most android phones. Make sure your phone support OTG function. This adapter can only used in OTG android phones / tablets. Suitable for/Support the standard USB interface, not the thin one..
  • Package included: 1 x USB 3.0 TF card reader 1 x USB-C OTG adapter.
Check Stock

6 Axis 125KHz NVCM USB Mach3 Stepper Motor Motion Control Card Breakout Board USB interface CNC Controller Board 12-32VDC for Servo Motor

  • ♞【Support software】This NVCM card support Mach3 software, through USB port to communicate with computer..
  • ♞【DC power supply input】main device is 12V-32V DC power supply input,current should higher than 1A.
  • ♞【Max 6 Axis Control】Can support 6 axis stepper systems maxisim,125KHz pulse output for every axis.
  • ♞【PWM output】1 port 0-10V spindle speed analog output interface(can change to PWM output).
  • ♞【Multifunction】 Power supply interface, USB connection interface, Stepper/Servo control output interface, spindle control output interface,....
Check Stock