Categories

Best Used 25ton Tadano

Electric 50 Ton Hydraulic Shop Press Brake Bender Bending 3 Phase 220 Volt

  • Cylinder Max Pressure 25MPA,TONNAGE: 502 KN.
  • Worktable Size: 13-1/2" x 30-1/2" x 1-1/8".
  • Overall dimension: 50" x 20" x 66-1/2" (crate: 59" x26" x 78") *estimate only*.
  • Weight G.W. / N.W. : 1,529 lbs / 1,372 lbs *estimate only*.
Check Stock

Goplus 2 Ton Folding Engine Hoist Cherry Picker Shop Crane Hoist Lift, Heavy Duty Steel with 6 Iron Caster Wheels (Red)

  • ...he operation flexible and smooth, but also providing maximum maneuverability. It is a good choice for transporting engines..
  • 【Adjustable Positions & Folding Design】There are 4 adjustable positions for your different work demands: 0.5Ton,1Ton,1.5Ton and 2 Ton. Equipped with 8-ton ram hydraulic cylinder, it can be used for long time. Folding design makes the stand easy to transport and store as a space saver..
  • 【Practical Engine Stand】This hydraulic engine hoist can be the perfect choice for daily vertical lifting & support in automotive and repair shops. It can be widely used in transporting, repairing, maintenance and assembly heavy parts such as axles, transmissions and transfer cases around the shop..
  • 【Powder Coated Finish】This engine hoist is evenly painted with glossy corrosion-resistant & anti-rust paint, which can be used both indoors & outdoors. With its smooth finish, it is also very easy to clean and maintain with damp cloth..
Check Stock

Amrad TES5 Easy-Start 5 Hard Start Kit for Heat Pump - 1-5 ton

  • Can be used in place of the "4" most commonly used Hard-Start kits.
  • Microfarad Coverage: Up to 1 ton - 108 to 130 mfds , 1 to 2 tons - 189 to 227 mfds , 2.5 to 3 tons - 233 to 280 mfds or 3.5 to 5 tons - 270 to 324 mfd.
  • High microfarad capacitor and potential relay are enclosed within a sealed aluminum housing protecting it from harsh environments.
  • Does NOT require a vent hole and will NEVER dry out.
  • For use with A/C , Heat Pump , HVAC and Refrigeration Compressors.
  • AmRad TES5 Replaces & Supersedes the following aftermarket Hard Start Kits: TES4 , TES-4 , TES-5 12400 12600 5-2-1 Products , Rectorseal KS1 , Rectorseal TO5 , SPP5 , SPP6 , WSX5 , WSX6 , TradePro TO-5 , TradePro KS-1 , TurboStart , Turbo-Start , Turbo Start and many others.
Check Stock

K Tool International 50 Ton Blue Air Hydraulic Truck Jack HD KTI63198

  • [50-TON CAPACITY] - K tool International service jack rated to lift up to 50 tons or 100,000 lbs..
  • [LIFTING RANGE] - K Tool 50 ton jack has a lifting range from 11.4" to 21.25". Service Jack provides the opportunity for many automotive/truck needs..
  • [BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage..
  • [LONG PUMP HANDLE] - Long pump handle with release knob. Works independently of handle position. Handle locks in both vertically at 45 degree angle and horizontally..
  • [NARROW WIDTH] - Truck jack narrow width allows jack to fit between tandem wheels..
Check Stock

Grifiti Band Joes 1, 2, 3, 4, 6, 9, 12 x .25 Inch 60 Pack Durable Silicone Rubber Bands Cooking Chef Ring Wallet Box Book Wrap Durable Hardware

  • Cooking grade silicone, hot, cold, UV, Chemical Resistant, Durable, Long lasting Rubber Bands. 60 Pack, 10 each of 1, 2, 3, 4, 6 x .25 inches and 5 each of 9,12 x .25. 60 bands total. Assorted Colors..
  • Durable, super long lasting silicone bands wrap up everything - rings, cords, wrists, wallet, box, card, shirts, pants, clothes, wood working, cooking, storing, wrapping - you think of it we have a band for you..
  • 60 pack means 60 bands in 1 pack. We make packs of single sizes and different widths but this is our retail 60 pack of assorted sizes in .25 width. We have .125, .375, .5, .75, 1 and 2 inch widths in a ton of sizes..
  • If you order from fulfilled by Grifiti on the listing we can send you any color mix you want..
  • Grifiti Band Joes .25 inch come in 1, 2, 3 4, 6, 9, 12 inches long and a ton of other sizes and shapes..
Check Stock

Goplus 2 Ton Folding Engine Hoist Cherry Picker Shop Crane Hoist Lift, Heavy Duty Steel with 6 Iron Caster Wheels (Black)

  • ...ding maximum maneuverability. It is a good choice for transporting engines..
  • 【Adjustable Positions & Folding Design】There are 4 adjustable positions for your different work demands: 0.5Ton,1Ton,1.5Ton and 2 Ton. Equipped with 8-ton ram hydraulic cylinder, it can be used for long time. Folding design makes the stand easy to transport and store as a space saver..
  • 【Practical Engine Stand】This hydraulic engine hoist can be the perfect choice for daily vertical lifting & support in automotive and repair shops. It can be widely used in transporting, repairing, maintenance and assembly heavy parts such as axles, transmissions and transfer cases around the shop..
  • 【Powder Coated Finish】This engine hoist is evenly painted with glossy corrosion-resistant & anti-rust paint, which can be used both indoors & outdoors. With its smooth finish, it is also very easy to clean and maintain with damp cloth..
Check Stock

3M Drape Pre-Taped Masking Tape Drop Cloth Painting Protection Covering Film (78.7 inch (2000mm))

  • 3M Drape Pre-Taped Masking Tape have used it as a full drop cloth, but also have made use of it for tight spots, or for closing off a gap from dust..
  • 3M Drape Pre-Taped Masking Tape even used it to lay out small paint free zones on walls when doing accent work..
  • 3M Drape Pre-Taped Masking Tape worked great used it to protect the outside of your car as painted the engine bay. So easy to use and can be used for many applications..
  • It cuts down on prep time a ton being pre-taped, but what you like most about it is its flexibility..
  • 3M Drape Pre-Taped Masking Tape is available in 15.7 in(400mm) / 25.6 in(650mm) / 35.4 in(900mm) / 59.1 in(1500mm) / 70.9 in(1800mm) / 78.7 in(2000mm) widths to fit any sizing need.
Check Stock

Jackco 3 Ton Low Profile Aluminum Racing Floor Jack with 3 Ton Aluminum Jack Stands

  • 3 Ton Aluminum Low Profile Racing Jack: Aircraft billet aluminum construction Dual Plunger for quick lift.
  • 3 Ton Aluminum Jack Stands: Aircraft-grade aluminum Lightweight - less than 5 lbs. each 6 adjusting positions from 9.5” to 15.25”.
Check Stock

Stark USA 2 Ton Engine Hoist Stand Cherry Picker Ship Crane Folding Lift Garage Workshop Auto Repair Foldable Stand, Red

  • Useful Lift Equipment - The hydraulic engine hoist is the perfect choice for everyday vertical lifting & support in automotive and ag repair shops. It also excels in situations where a combination of sleek design & superior strength is required. From engines to differentials to transmissions and other heavy loads, this hoist gets the job done..
  • 360' Swiveling Wheels - There are six durable wheels on the lift, which can be rolled around & swung in any direction. It provides maximum maneuverability & it is a good choice for moving heavy parts.
  • Heavy Gauge Structural Steel - The engine hoist is made of heavy duty structural steel, durable & sturdy to keep its shape and also very safe when use. With the solid steel construction, it has 4000 lb closed boom capacity & 1000 lb extended boom capacity.
  • Powder Coated Finish - It is painted with glossy corrosion-resistant & anti-rust paint, which can be used both indoors & outdoors. With this feature, it is also very easy to clean.
  • Adjustable Positions & Easy Storage - 4 adjustable positions for your different work needs: 0.5Ton , 1-Ton, 1.5-Ton and 2-Ton. Equipped with 8-ton ram hydraulic cylinder, it can be used for long time. The foldable design is good if you are looking for an easy cranes to store.
Check Stock

Pake Handling Tools Hydraulic Toe Jack (10T) - Heavy Duty Compact 360 Degree Rotation 22000 lbs Capacity

  • MULTI-USE JACK: Use this quality, compact hydraulic jack for repairs, maintenance, or installation of heavy machines..
  • CONVENIENT HEIGHT: Lifts 1.2-10.2” and has a head lifting range of 16.5-25.6” to give ample room for maintenance..
  • POWERFUL: Capable of lifting 10 tons pounds with ease..
  • 360° ROTATION: Can be used horizontally and vertically – the most convenient hydraulic jack yet!.
  • COMPACT SIZE: The low profile, compact design makes this jack easy to store and transport..
Check Stock

ZINKO 5 Ton Super Low Height Hydraulic Jack Model: ZMJ-5C

  • Can be used in conjunction with a mechanical gear puller to create a hydraulic puller with over 5 ton capacity.
  • This product can be used both upright and horizontally. When used horizontally, the strokes decrease to about 60% of the full stroke..
Check Stock

5 Gallon Bubble Magic Washing Machine + Ice Hash Extraction 5 Bags Kit GROW1

  • THE MONSTER PRESS - The Best 8-Ton / 16,000 Pound Hydraulic Ram Press in the Market - Capacity Out of: 5" x 7" Inch Bricks with up to 3" Inches Deep in Thickness,.
  • High Tech Hydraulic Presses Are Recommanded & Used by Professionals. High Tech Innovative Original & Proven Desgined Presses are fully machined presses built from aircraft aluminum. All of our Presses are a precision state-of-the-art piece of equipment,.
  • Made in USA - HighTech Hydraulic Press Has Been America's Premeir Brand of The Most Outstanding Presses in the World. Such as, the best selling 4-Ton Brick Press, the 8-Ton Monster Press & the new, 10-Ton, The Big Bastard Press,.
  • Easy to Clean. Does Not Get Hot. Durable. Can be used repeatedly many times for a long time. Does not contain any harmful objects or materials,.
  • Capable of Getting Heated. Monster Press has no Limits. When heated, the aircraft aluminum transfers and retains heat much more efficiently and effectively than steel. (Other Presses are made out of steel not aircraft aluminum). Utilizing machined aluminum (instead of welded steel) allows Hightech Presses to be constructed from one solid piece of material so there are no seams or gaps and everything fits together perfectly for the life of the Press..
Check Stock

AnEssOil Commercial Grease Trap Stainless Steel Interceptor 0.25 Ton/h (45x25x25cm)

  • 【Overall dimensions】35x20x18cm/45x25x25cm/60x30x30cm.
  • Weight: 5.5 lb (2.5 kg) / 10.1lb(4.6 kg) / 16lb/(7.3 kg) ；Material: Heavy Duty 0.6mm Thickness Stainless Steel.
  • 【High quality】Made of heavy duty 0.6mm thickness stainless steel. Anti-rust, anti-corrosion, non-deformation long service life. Flowing speed up to 0.15 / 0.25 /0.5 Ton/ H.
  • 【Easy to clean】Baffles are removable,Locking device at both side prevent side leakage of sewage. Faucet switch makes it easier to control the outlet of sewage. Lifting handle at the top allows easy transportation..
  • 【Easy to install】 Our Grease Traps are delivered fully assembled and couldn't be easier to install. Just connect the pipe run from the sinks and dishwasher to the Grease Trap inlet. Then pipe the Grease Trap outlet directly to drain. We recommend solvent weld pipe is used for a secure fit. Also make sure the trap is on the flat floor..
  • 【100% Refund guarantee】We guarantee 3 year warranty, free parts exchanged, you can be sure to buy. If you are not completely satisfied with our products, we will give you a full refund..
Check Stock