Best V Bearing

ComfortBilt & Castle Serenity Pellet Stove Maintenance Kit

  • Included: Igniter (CB-IGNITER) Lower Auger Bearing (CB-LOWER-BEARING) Upper Auger Bearing (CB-UPPER-BEARING) Exhaust Gasket (6.5" dia.) (COMFORTBILT-EXHAUST-GASKET) Large Cleanout Gasket (HP22 & HP61) (LARGE-CLEANOUT-GASKET) Small Cleanout Gasket (HP22I & HP21) (SMALL-CLEANOUT-GASKET) Door Gasket 4ft. (CB Door Gasket) ComfortBilt Backup / Main Power Fuse (250V-10A): CB-FUSE.
Check Stock

GDSTIME 80mm x 80mm x 25mm 12V Brushless DC Cooling Fan

  • Dimension of outer the frame is 80mm(L) x 80mm(W) x 25mm(H) / The size of fan in inch is 3.15in(L) x 3.15in(W) x 1in(H).
  • The center to center distance beween the mountiong holes is 71.5mm/2.81in..
  • Operating Voltage Range:5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.).
  • (-): Black wire. This is a two wire cooling fan.
  • Life: working up to 35000h at 25 degrees..
  • Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase..
Check Stock

ARCTIC F12-120 mm Standard Low Noise Case Fan - Fluid Dynamic Bearing - Innovative Design

  • Innovative DESIGN enables quiet and efficient ventilation: The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimizing the noise level yet delivering the desired airflow and pressure..
  • Two way installation: blow warm air out of the case. Draw cool air into your case..
  • Long service life: The fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life..
  • 1, 350 RPM @ 12 V/ Max. Airflow 53 CFM (126 M³/h)..
  • Set the fan speed by using a different voltage (5-12V).
Check Stock

USA Standard Gear (ZBKF8.8) Bearing Kit for Ford 8.8 Differential

  • Replacement T-5 bearing retainer with steel throw-out bearing sleeve....
  • Fits production and Ford Racing T-5 transmissionsSmoother clutch engagement can be yours with one of these Ford Racing T-5 bearing retainers. The steel bearing sleeve and aluminum mounting flange reduce flex for more consistent....
Check Stock

GDSTIME 60mm x 60mm x 15mm 5V 2PIN DC Brushless Cooling Fan

  • Dimension of outer the frame is 60mm(L) x 60mm(W) x 15mm(H) / The size of fan in inch is 2.36in(L) x 2.36in(W) x 0.59in(H).
  • Operating Voltage Range:4.5V to 5.5V. (overtake to 5.5V, it can also work. but not safe, and seriously affects lifespan of fan.).
  • Life: working up to 35000h at 25 degrees..
Check Stock

GDSTIME Quiet 80mm Fan Router Cooler Fan 80mm x 25mm DC 5V USB Brushless Cooling Fan

  • Package include: 1pcs 80mm router cooler fan.
  • Dimension of fan: 80x80x25mm / 3.15x3.15x 1 in. Totally 82x82x57mm / 3.23in x 3.23in x 2.24in..
  • Operating Voltage Range:4.5V to 5.5V. (overtake to 5.5V, it can also work. but not safe, and seriously affects lifespan of fan.).
  • Life: working up to 40000h at 25 degrees..
Check Stock

GDSTIME Quiet 90mm Fan, Router Cooler Fan, 90mm x 25mm DC 5V USB Brushless Cooling Fan

  • Package include: 1pcs 92mm router cooler fan.
  • Dimension of fan: 92x92x25mm / 3.62x3.62x1 in per fan. Totally 92x92x57mm / 3.62in x 3.62in x 2.44in..
  • Operating Voltage Range:4.5V to 5.5V. (overtake to 5.5V, it can also work. but not safe, and seriously affects lifespan of fan.).
  • Life: working up to 40000h at 25 degrees..
Check Stock

GDSTIME 80mm x 10mm 5v USB Connector Dc Brushless Cooling Fan

  • Dimension of outer the frame is 80mm(L) x 80mm(W) x 10mm(H) / The size of fan in inch is 3.15in(L) x 3.15in(W) x 0.39in(H).
  • The center to center distance beween the mountiong holes is 71.5mm/2.81in..
  • Operating Voltage Range:4.5V to 5.5V. (overtake to 5.5V, it can also work. but not safe, and seriously affects lifespan of fan.).
  • Life: working up to 35000h at 25 degrees..
  • 4*M3x14mm screws & nuts( The fan is mounted by screws.).
Check Stock

Hitec 32082S HS-82MG Metal Gear Micro Servo

  • Speed (4.8V/6.0V): 0.12 / 0.10 sec @ 60 deg..
  • Torque oz./in. (4.8V/6.0V): 39 / 47, Torque kg./cm. (4.8V/6.0V): 2.8 / 3.4.
  • Size in Inches: 1.17 x 0.47 x 1.16, Size in Millimeters: 29.72 x 11.94 x 29.46, Weight ounces: 0.66, Weight grams: 18.71.
Check Stock

Hitec 31055S HS-55 Economy Sub Micro Universal Servo

  • Speed (4.8V/6.0V): 0.17 / 0.14 sec @ 60 deg..
  • Torque oz./in. (4.8V/6.0V): 15 / 18, Torque kg./cm. (4.8V/6.0V): 1.08 / 1.30.
  • Size in Inches: 0.89 x 0.45 x 0.94, Size in Millimeters: 22.61 x 11.43 x 23.88, Weight ounces: 0.28, Weight grams: 7.94.
Check Stock

GDSTIME Blower Fan, 40mm x 40mm x 20mm 24V DC Brushless Blower Cooling Fan Sleeve Bearing

  • Dimension: 40mm(L) x 40mm(W) x 20mm(H) / The size of fan in inch is 1.57in(L) x 1.57in(W) x 0.79in(H).
  • Operating Voltage Range:14V to 27.6V. (overtake to 27.6V, it can also work. but not safe, and seriously affects lifespan of fan.).
  • (-): Black wire. This is a two wire cooling fan.
  • Life: working up to 35000h at 25 degrees..
  • Package include: 1 x 40mm cooling blower fan.
  • 3*M3x20mm screws ( The fan is mounted by screws.).
Check Stock

GDSTIME Dual Ball Bearing Big Air Flow High Speed Preesure 4500rpm 12038 12cm 120mm X 38mm 5 Inch 12v Dc Cooling Fan

  • Dimension of outer the frame is 120mm(L) x 120mm(W) x 38mm(H) / The size of fan in inch is 4.72in(L) x 4.72in(W) x 1.5in(H).
  • The center to center distance beween the mountiong holes is 105±0.3mm/4.13in..
  • Operating Voltage Range:5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.).
  • High Speed: This model is designed to maximize airflow and can be too loud for some applications..
  • Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase..
Check Stock

REEFS RC 422HDv2 Servo Winch with Built in Controller, SEHREEFS43

  • Reef's RC REEFS43 - 422HDv2 Servo Winch & Built In Controller.
  • Features: "Submarine Waterproof" 7075 Aluminum CNC-Machined Spool w/Clear Finish 7' Silicone Coated Steel Braided Line, w/Scale Recovery Hook Internal Steel Gears All CNC Aluminum Casing Anodized Color: REEFS GRAY.
  • Includes: (1) Servo Winch with Built in Controller.
  • Specs: Bearing Type: 2BB Operating Voltage: 4.8V-8.4V Weight: 2.84oz Dimension: 1.57" x .79" x 1.5" (LxWxH) Torque: 405oz @ 6.0v / 450oz @ 7.4v / 480oz @ 8.4v Speed: .11sec @ 6.0v / .10sec @ 7.4v / .09sec @ 8.4v Spline: 25T.
  • Part number(s) included (in factory packaging): REEFS43.
Check Stock