Categories

Best V band Clamps

Non-Stripping 1 inch Hose Clamp Size#10 Wide Higher Torque Heavy Duty 5/8 to 1-1/16 Adjustable Worm Gear Hose Clamps Stainless Steel 304 Pipe Tubing Clamps Heater Hose Clamps 3/4 and 5/8 20Pack

  • Why Non-Stripping: Our hose clamp band material is thick and non-perforated. The other typical 1" hose clamps are thin and perforated which's easy to deform and strip the perforations if the screw clamp is over-torqued. Our screws are much bigger and with deeper threads that grip the embossed band tightly. The buckle bottom is welded into one-piece housing for higher tensile strength. These heavy duty hose clamps can provide superior clamping force for solid & safe seal!.
  • Rolled Band Edge Protection: As our 3rd picture, the rolled-up band is effective to prevent the metal edge cutting into the soft hoses, no matter for silicone, pvc or rubber hose. This is an important and safe design for worm drive hose clamps to eliminate the damage to hoses during installation and final torquing, especially for heater silicone hose and automotive applications..
  • Non-Perforated Band Stronger: Compared with perforated band, our non-perforated solid band is virtually impervious to over-tightening, deformed and stripping. The thicker metal is less vulnerable to stress cracking, so the life of screw clamps can last longer. The embossed band also protects the soft hoses from shearing or extruding (like "cheese-grater" making you hard to remove the tubing clamps out of ....
Check Stock

Tabazy CV Joint Banding Tool with Cutter, Ear Clamp Pliers with 8pcs Single Ear CV Boot Clamps Tool Kit,

  • Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • CV Joint Clamp Banding Tool: Made of high quality steel, use with banding straps up to 10mm (0.39in) wide, 0.6mm(0.02in) thick, with a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. (NOTE: The banding straps are not included, only ear crimp clamps shown in the picture are included. ).
  • Material of Ear Clamp: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Ear Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275" (7mm) in width &....
Check Stock

KIMISS 304 Stainless Steel V-band Clamp, Universal Car 5" Turbo Exhaust V-Band Flange Clamp Kit

  • 【Premium Quality】Made with high strength stainless steel for maximum durability.It is not easy to rust and has strong resistance，so don't worry about changing the product all the time, it will last a long time.Guarantee will not let you down..
  • 【Precise design】Easy to install and remove without damage. Depending on the design, this type of clamp is less prone to leaks, and is a good way to secure parts together without the use of welds..
  • 【Perfect Compatibility】Perfectly universal fit for car turbo exhaust system,easy to use.so don't worry about not matching your model,it will suit your car very well..
  • 【Cost-effective】These Walker band-style exhaust clamps give you a 360 degree seal that won't leak he clamps come with pre-attached hardware and high quality bolts for high strength and temperature durability,the value is higher than other product ..
  • 【Great For Racers and Tuners】This V-band clamp is great for racers and tuners, these clamps make it easy to remove parts to gain access to vital components easily..
Check Stock

WG Spring,7PSI WasteGate Spring Coated WasteGate Spring WG Carbon Steel Vehicle Accessory for TurboSmart 38mm 40mm 45mm

  • Designed to fit into tight engine bays, giving the ability to index the cap orientation in 12 different positions.
  • Offers superior flow and heat handling capabilities.
  • Compatible with other popular 38mm v-band inlet and outlet weld flanges.
  • Supplied with 7PSI Spring (installed), Inlet and outlet Weld Flanges, Inlet and outlet V-Band clamps, Valve seat, (2) 1/16th blanking plugs, (2)....
Check Stock

CV Joint Boot Clamp Pliers - 22Pcs CV Boot Clamps Kit Auto Repair Tool Automotive Hose Axle Plier CV Clamp Tool for Most Cars

  • CV BOOT CLAMP PLIERS – With 2pcs CV joint boot clamps pliers car banding tools kit set for fast and simple tensioning and securing of CV boot banding strap. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • 20PCS CV BOOT CLAMPS – 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It’s perfect for you to replace the car broken drive shaft CV boot clamp..
  • CV BOOT CLAMP TOOL KIT – We prepared 10Pcs small stainless steel cv boot clamps and 10Pcs large clamps for fixing cv boots. and 2pcs Auto Cv Joint Boot Clamps Pliers in this car banding tools kit, which is a perfect set for fast and simple tensioning and securing of CV boot banding strap..
  • EAR CLAMP PLIERS – Ideal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp pliers fits most of cars..
  • CV JOINT BOOT – The cv boot clamps are made of non-magnetic stainless steel material, which is an ideal choice for areas that get a lot of rainfall or snow because the metal is resistant to rusting and very durable..
Check Stock

Beck/Arnley 103-2958 Constant Velocity Joint Boot Kit

  • ☛ 1, 【Brand Advantage 】----- Join the 5 million Customers powered by our leading Product and Service. CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots..
  • ☛ 2, 【With 8Pcs CV Boot Clamp】 ----- Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • ☛ 3, 【With Ear Clamp Pliers and CV Joint Boot Clamp Pliers 】 ----- The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • ☛ 4, 【Easy To Use】 ----- Wrap free-end clamps 3/8-inch or 1/4-in....
Check Stock

ROADFAR CV Joint Boot Kit Inner 1999-2005 for Polaris Sportsman 500 700

  • ☛ 1, 【Brand Advantage 】----- Join the 5 million Customers powered by our leading Product and Service. CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots..
  • ☛ 2, 【With 8Pcs CV Boot Clamp】 ----- Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • ☛ 3, 【With 2Pcs CV Joint Boot Clamp Pliers 】 ----- The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • ☛ 4, 【Easy To Use】 ----- Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding ....
Check Stock

Cv Joint Ear Clamp Banding Tool Cv Boot Clamp Pliers Automotive Hose Axle Plier for  ATV UTV Most Cars Boot Clamps

  • Design:The CV joint boot clamps pilers are newly.With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively.Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • Funnction:This CV joint boot clamps pilers are key tools to fix the CV boots.They are used to bind, tenseion and sercure CV boot banding straps It helps you work morequickly.Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses..
  • MATERIAL:CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish.It looks much more shinning and it is totally rust adn corrosion resistant. Safe and durable..
  • APPLICATIONS: Use with any banding up to 2/5-inch (10mm) in width and vacuum hoses,for Ear-Type Clamp Crimping or Removal on for Audi, VW, BMW, Mercedess, Honda, Mazda Vehicles to crimp and flatten the clamp on Ear-Type constant velocity joint boot clamps,also be used for securing ATV UTV boot clamps..
  • CV Joint Ear Clamp Banding Tool & Boot Crimp Pliers AKA cv Clamp Band,cv Clamp Pliers,cv Clamp Tool,cv Boot Clamp Pliers,cv,Boot Clamp Kit,cv Boot Clamp Tool,cv Boot Clamp Pliers ....
Check Stock

Poweka CV Joint Boot Clamp Pliers with CV Boot Clamps Kit, Auto Repair Tool for Car Tire Repair Clamp Removal - Car Banding/band Tool Kit, Automotive Hose Axle Plier

  • This set contains both a CV joint clamp banding tool and CV boot clamp pliers, which are designed for fast and simple tensioning and securing of CV boot banding strap..
  • Joint clamp banding tool: an effective tool for installing CV clamps. The banding tool works with the installers ratchet and 1/2" socket or uses the provided lever to tension the clamp..
  • CV boot clamp pliers:This device crimps and flattens ear-type clamps found on CV joint boots, and installs quick clamps on the fuel filter and cooling system hoses..
  • With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. Pliers with jaws and formed handles for comfort, less user fatigue, and more productivity..
  • Made from high grade metal and plastic, with high hardness, long lasting. Package included: 1Pcs CV Clamp Tool, 1Pcs CV Joint Boot Clamp Pliers, 4Pcs Small CV Boot Clamps, 4 Pcs Large CV Boot Clamps..
Check Stock

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

  • ...p Pliers : Use with any banding up to 2/5-inch (10mm) in width.
  • Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
  • Plier works on steering gear gaiters and fuel hoses on various brands of cars.
  • Can be used for working on Oetiker System hose clamps.
  • ◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
  • ◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
  • To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
  • We recommend double-wrapped band for added strength.
  • ◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the desired length ....
Check Stock

Adjustable House Clamp 304 Stainless Steel, 14.7 FT Duct Metal Strapping with Holes + 10 Stronger Fasteners, Large Worm Gear Hose Clamps Band Clamps for Pipe Plumbing Mechanical Applications

  • [Any size hose clamps Assortment Kit] Do you sometimes need an odd-sized hose clamp, especially one that would be bigger than you would normally use? If so, this is the hose clamps assortment kit for you, with this kit you custom-cut your own clamps when and as you need them. No more ill-assorted collections of mostly wrong-size clamps that are usually too big or too small for your needs with no bulky, wasted material..
  • [Package Include] The hose clamp kit includes 0.5’’ X 14.76 FT stainless steel strapping bands, and 10 pcs fasteners in total. They can be adjustable for most clamp and securing situations. Moreover, very strong good quality 304 stainless steel will not rusty for a long time..
  • [How to Use] Before using, prepare plier for cut the hose clamps, and a small flat bladed screwdriver. Then, test feed the direction of the band before crimping the screw end on by feeding in, screwing, making sure it is not locking up after few turns. The band will work smoothly and is tightened by a screw with threads of the screw engaging the slots in the band, if put together proper way. Once you get screw clamp part mounted on the band, just measure how long you need i....
Check Stock

2 Pack Compatible/Replacement Calculator Ink Roller Black/Red IR-40T CP13 for Canon P23-DH V P27-DH and More

  • ☛ 1, 【Brand Advantage 】----- Join the 5 million Customers powered by our leading Product and Service. CV Boot Clamps are High-quality....
  • ☛ 2, 【With 8Pcs CV Boot Clamp】 ----- Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and....
  • ☛ 3, 【With Ear Clamp Pliers and CV Joint Boot Clamp Pliers 】 ----- The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and....
  • ☛ 4, 【Easy To Use】 ----- Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and....
  • ☛ 5, 【What You Get 】----- In this kit, You will get 4Pcs Small CV Boot Clamps(Height: 7mm), 4 Pcs Large CV Boot Clamps(Height: 9mm), 1Pcs CV....
Check Stock

Cambridge Worm Gear Hose Clamps SAE Size 24, Adjustable 1 1/16-in to 2-in, Stainless Steel Band and Housing, Zinc Plated Screw, 10 Pack

  • Premium quality hose clamps are easy to use and provide a tight and secure hold.
  • 1/2 inch band size minimum diameter 1 1/16 inch maximum diameter 2 inch exceeds 60 inch pounds of torque.
  • Cambridge hose clamps are multi purpose clamps used to seal hoses or pipes onto fittings.
  • the standard hose clamps exceed 60 inch pounds of torque.
  • Cambridge hose clamps are the ideal choice for all forms of projects and applications requiring hose clamps.
  • Series 2300 hose clamps are designed with a stainless steel band and housing and a zinc plated screw making them more economical than clamps made only with stainless steel.
  • 10 pieces packed in a convenient storage box.
  • Cambridge performance driven high quality products are preferred by industry leaders.
Check Stock