Best Vacuum Brazing

Aluminum Radiator for Yamaha YFZ450 YFZ 450 2004-2008 04 05 06 07 08

• Aluminum Radiator for Yamaha YFZ450 YFZ 450 2004-2008.
• This radiator is heavy duty designed, cooling capacity is increased about 40% than standard radiator ,really well packed,exceeds OEM spec..
• The core of the radiator is welded in vacuum brazing furnace, no epoxy..
• Made of High Quality Aluminum,All Aluminum include Core & Tank.

Powermatic 1792821 Tool Shelf (for PM2820EVS Drill Press)

• ☞Using high-quality vacuum brazing diamond material, sharp and durable and improves cutting efficiency..
• ☞Total length: 100mm, Blade wide: 5mm, Blade thickness: 1.9mm..
• ☞Diamond coated for dry and wet use, longer service life..
• ☞Multi purpose for cutting marble, granite, quartz stone, ceramic tile, brick, plastic and so on..
• ☞Fast cutting, easy to use, can be cut along the curve, straight line, square cut, round cut, etc..

OKDIAMOND Metal Cutting Diamond Blades Multipurpose All Purpose Cut Off Wheel for Wood,Stone,Rebar,Metal,Steel,Reinforced Concrete-4-1/2 Inch

• Size: 4 1/2" diameter with a 7/8" arbor hole. Bushing for adapting to just about any hand-held grinder or trim saw. The maximum safe operating speed is 12,500 RPM..
• Multi-Purpose:2 in 1 Cutting Wheelcan be used for cutting,grinding,beveling,rounding or shaping materials. Vacuum Brazed All Purpose Metal Cutting Diamond Blade cut-off wheel.
• Vacuum Brazed Technology, more efficient than Electroplated saw blades,5 times. Vacuum Brazing Diamonds on the blade gives a quicker and more aggressive cut than standard diamond blades.
• Dry working, wet working may prolong the working life. Designed to cut through the tough materials. Multipurpose All Purpose Cut Off Wheel. For Cutting Hard wood, stone, aluminum, Fire Door, Masonry, Plastic, PVC, Rebar, reinforced Concrete, Steel metal, and more.
• 【NOTICE】For your safety, please must wear gloves and goggles and be care around spark when using rotary tool accessories. Please according to operation tips..

3Pack 4.5" Diamond Metal Cutting Cut Off Wheels for 5000+ Cuts on Rebar, Steel, Iron and INOX, Angle Grinder Diamond Disc with 7/8" Arbor

• DURABLE: 1 equals 100, OA-BRES diamond cutting disc delivers 5,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels. Premium Vacuum brazing technology, brazing high quality diamond sand to the edge of the steel core, coated with abrasive materials on both sides, with high performance, durability and service life..
• EFFECTIVE: Diamond sand specially designed for cutting various metals, ideal for dry cutting of metal, rebar, iron, brass profiles, aluminum, different types of pipes and sheet metal..
• SAFETY:Solid steel wheel body greatly reduces risk of shatter and injury,diamond cutting edge is more convenient in usage than any abrasive wheel: fewer sparks, no dust, no smell, no overheating..
• COMPATIBILITY:OA-BRES Professional brazed diamond saw blade compatiable with all brands of die grinders, angle grinder, cut off toos, compact saw with a 7/8" (22.22 mm) Arbor, and any other tools with a 7/8" arbor..
• INCLUDE: 3 Pack 4.5-inch(115mm) diamond cut-off wheels set with a 7/8" ( 22.22 mm) Arbor, MAX RPM 13200..

3Pack Diamond Cut Off Wheels 3 Inch 75MM Metal Cutting Wheel with 3/8 Inch 9.5MM Arbor Diamond Disc with 5000+ Cuts on Rebar Steel Iron and INOX

• DURABLE: 1 equals 100, OA-BRES diamond cutting disc delivers 5,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels. Premium Vacuum brazing technology, brazing high quality diamond sand to the edge of the steel core, coated with abrasive materials on both sides, with high performance, durability and service life..
• EFFECTIVE: Diamond sand specially designed for cutting various metals, ideal for dry cutting of metal, rebar, iron, brass profiles, aluminum, different types of pipes and sheet metal..
• SAFETY:Solid steel wheel body greatly reduces risk of shatter and injury,diamond cutting edge is more convenient in usage than any abrasive wheel: fewer sparks, no dust, no smell, no overheating..
• COMPATIBILITY:OA-BRES Professional brazed diamond saw blade compatiable with all brands of die grinders, angle grinder, cut off toos, compact saw with a 3/8" (9.5 mm) Arbor, and any other tools with a 3/8" (9.5 mm) Arbor..
• INCLUDE: 3 Pack 3-inch(75mm) diamond cut-off wheels set with a 3/8" (9.5 mm) Arbor, MAX RPM 20300..

Uniweld KCHP Cap n Hook Brazing/Welding Outfit Tanks Not Included

• Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
• Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
• Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
• Centurion series regulators with Protective rubber gauge boots.
• Front valve welding handle with stainless steel ball point valves for accurate Gas control.

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

• 【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
• 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
• 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..

Forney 48571 Super Sil Flo Brazing Rod, 1/8-Inch, 1/2-Pound

• Super Sil-Flo brazing rod is a brazing alloy that is ideal for large and small copper tubing installations.
• Typical applications are refrigeration control valves, joining copper wires to rotor bars, electrical connections.
• T joints, wage joints and sleeves, couplings on return bends and condenser fitting.
• Sil-flo is not recommended for ferrous metals such as iron or steel.

Hot Max 24184 Aluminum Brazing Flux for Welding

• Formulated specifically for torch brazing aluminum.
• Normally used with 4047, 4043, or 1100 brazing filler alloy.
• Can also be used for furnace and automatic flame brazing operations.

Lucas-Milhaupt 99088 Flux Cored Aluminum 822

J.W. Harris Company 40022 Stay-Silv White Brazing Flux

• It is a powder flux formulated for brazing gold and silver..
• Jar of welding powder brazing flux powder welding cast consumables jewelry weld repair supply.
• There are 250 grams in this jar, which will definitely meet your needs..
• The powder melts at 700 degree centigrade.​.
• Brazing powder improves the weldability of metal in the process of high temperature welding..

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

• MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
• ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
• PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
• APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
• SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..

K-T Industries 2-2750 Brazing Flux, 0.5 lb

• Price For: Each Tensile Strength (PSI): - Type: - Contents: 56% Silver, 22% Copper, 17% Zinc, 5% Tin Container: - Application: For Ferrous and Non Ferrous Alloys Good for Stainless Steel Includes: 1 oz Brazing Wire and 1.75 oz White Flux Item: Brazing Kit Material: Safety-Silv-56 Dia. (In.): 1/16 Length (In.): - Brazing Range (F): 1145 to 1205 Standards: AWS A5.8, Bag-7, NSF 51.
• Country of Origin (subject to change): United States.