Categories

Best Vacuum Parts For Saws

O SKOOL Automatic Vacuum Switch Allows Power Tool to Turn Vacuum/Accessory on and Off Automatically

  • NEW GENERATION: Addition of two tool outlets, no need extra extension socket, avoid messy cords and save time.
  • CONFIGURABLE ACTUATION THRESHOLD: 30W/60W, you can select flexibly appropriate actuation threshold according to your actual condition. Prevent vacuum....
  • CONFIGURABLE SHUTOFF DELAY TIME: Automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris....
  • TURN ON DELAY & SAFETY: Automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping. Adopting....
  • COMPATIBILITY: Supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Table Saws, Power Sanders,....
Check Stock

Automatic Vacuum Switch, Ortis Dust Control Autoswitch for More Power Tools, Delay Vacuum On/Off to Prevent Circuit Overload and Tripping, Adjustable Actuation Threshold

  • NEW GENERATION: Addition of two tool outlets, no need extra extension socket, avoid messy cords and save time.
  • Three vacuum run modes can be switch freely: Auto, Off and On.
  • The values are clearly displayed with LED indicators, each key for corresponding option, easier to check and set..
  • CONFIGURABLE ACTUATION THRESHOLD: 30W/60W, you can select flexibly appropriate actuation threshold according to your actual condition. Prevent vacuum from running too long or being unable to shut off after tool has stopped..
  • CONFIGURABLE SHUTOFF DELAY TIME: Automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency..
  • TURN ON DELAY & SAFETY: Automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping. Adopting UL-certified American Standard 14AWG power cord which allowable passage with a large current more than 30A. Thick copper core, covered with PC+ABS V0 grade flame retardant material, less heat during use and extend service life..
  • COMPATIBILITY: Supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Table Saws, Power Sa....
Check Stock

[New Generation] Automatic Vacuum Switch for Power Tools, Etoolcity Unique Current Sensing Technology to Delay Vacuum On to Prevent Circuit Overload, Eliminating Circuit Breaker Tripping

  • New Generation. LED digital tube display.
  • Adjustable vacuum startup time and shutdown time in vacuum auto mode.
  • Controller, tool and vacuum run Led indicator. All Our controller designs make your work more intelligent, convenient and safe.
  • Unique Current Sensing Technology. In vacuum auto mode, the vacuum will automatically delay turn on after the tools on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time.
  • Vacuum will automatically delay turn off after the tools off, which reducing airborne toxin and work area noise that can lead many health problems.
  • Suitable for most medium duty workloads. Etoolcity automatic vacuum switch has a starting threshold of approximately 0.25 amps(30watts at 120V and 60watts at 220V), perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum.
  • Adopting high-cost, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W. The switch's shell has PC+ABS V0 grade flame retardant material, it is more reliable and safe to protect work.
Check Stock

VEVOR Miter Saw Hood, 5000-L Dust Solution For Miter Saws, Chop Shop Dust Collection, Dust Collector Compatible with all Miter Saws, Accessory Holes, Carrying Bag,Silver Gray

  • ...tion hood is made of high-density oxford fabric, which is waterproof and wear-resisting. It has good tear resistance and will not stretch or shrink. Cover size: 50" L x 30" W x 40" H..
  • User-Friendly Design: Hood Captures dust and directs airflow to a 4" vacuum port, high-speed dust collection, drastically shortens clean-up time. You can connect with the vacuum cleaner to loosen your hands..
  • Security & Protection: Convenient cover saves your valuable time, keeping your work condition clean and eliminating billowing dust. The Interior baffle prevents the escape of fine dust. Significantly reduces irritation, allergies from dust..
  • Portable & Compact: The foldable design is adopted to store and transport effortlessly. Hood comes fully assembled, mounting stanchions included, pops-up for easy installation..
  • Ideal for Table Saws: This dust cover is compact and can shape with all 10" miter saws. They are designed specifically to capture dust generated by miter saws. The hood is ideal for shop vacs, dust collectors, or installed vacuum systems..
Check Stock

i-Socket Workshop Automated Vacuum Switch - Power Tool Activated Sensor and Automatic Shutoff - Workshop Safety Device - for Contractors and Woodworkers

  • Use high-quality materials: UL-certified US standard 3-pin AC power socket. UL-certified US standard 14AWG power cord. And the switch's shell is made....
  • Automatic turn on the vacuum when you start your tool , and delays 10 seconds to turn off the vacuum to clean the pipe when you complete your work.....
  • Package Included: ●1x vacuum switch with 15'' power cord ●1x Installation instruction.
  • Suitable for most medium duty workloads. Perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers,....
  • The total current of all electrical appliances used with this device must not exceed 15A when operating, and the electrical cutting tool can only be....
Check Stock

Automatic Vacuum Switch for Power Tools, Etoolcity Unique Current Sensing Technology to Delay Vacuum On to Prevent Circuit Overload, Eliminating Circuit Breaker Tripping

  • Unique Current Sensing Technology. If the tool motor connected to the 'A' port exceeds 30W, the vacuum connected to the 'B' port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time.
  • Make the Work More Effective. Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems.
  • Suitable for Most Medium Duty Workloads. Etoolcity automatic vacuum switch has a starting threshold of approximately 0.25 amps(30watts at 120V and 60watts at 220V), perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum.
  • More Safety. Adopting high-cost, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W. The switch's shell has PC+ABS V0 grade flame retardant material, it is more reliable and safe to protect work.
  • Two Installation Methods. You can use screws to fix the power module pa....
Check Stock

Spectre Performance 8711 Vacuum Sensor Adapter Kit

  • Attach vacuum lines almost anywhere on intake tube.
  • For use with our modular intake systems where vacuum hoses are required.
  • Includes 2 hole saws, 6 grommets and 10 fittings to fit all popular vacuum lines and air sensors.
  • Fits all popular vacuum lines and air sensors.
Check Stock

Rousseau 5000-L Lighted Dust Solution For Miter Saws, Silver

  • Eliminates dust generated by miter saws and illuminates work surface.
  • Interior baffles prevent escape of fine dust.
  • Use with shop vac, dust collectors or installed vacuum systems.
  • Hood folds into heavy duty carry bag for compact storage and transport.
Check Stock

New Echo Orange Chainsaw Carry Bag Case 103942147

  • New Echo Orange Chainsaw Carry Bag Case 103942147 Fits Saws Up To 20 Durable Nylon Bag".
  • Features Compartments For Oil And Tools And A Padded Shoulder Strap. Fits Most Saws With.
  • Up To 20 Bars And Chains. OEM Echo Parts / Accessories Part # 103942147 Chainsaw Carry".
  • Bag Durable Nylon Bag Features Compartments For Oil And Tools And A Padded Shoulder Strap..
  • Fits Most Saws With Up To 20 Bars And Chains Including CS-8000 With 20" Bar. Fits The".
Check Stock

Dustless Technologies D4000 DustBuddie Universal Dust Shroud for Worm Drive Circular Saws

  • Vacuum shroud used in dust containment while using worm drive and hypoid saws.
  • Universal fit for 7-1/4″ worm drive and hypoid circular saws.
  • Under mounted wheels for a cut that glides across the work surface.
  • Complies with OSHA 2017 silica rule laws.
Check Stock

Lackmond LSE - Metal/Ductile Saw Blade - 14 Steel Cutting Tool with Vacuum Brazed Diamond Tip & 20mm Arbor - LSE1412520

  • SEGMENTED CONFIGURATION – Ideal to use on ductile iron. The blade gullets aid in airflow and heat dissipation.
  • VACUUM BRAZED DIAMONDS – The diamond rim and steel core ensure the LSE series blades cut fast and have a long lifespan.
  • EXPERT DESIGN – Great for cutting metal, stainless steel, ductile iron, rebar, PVC, fiberglass, and more.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for construction workers, carpenters, general contractors, serious DIYers, and tradesmen.
  • EQUIPMENT – Designed to be used on hand grinders, circular saws, hand held saws and chop saws. Can be used wet or dry.
Check Stock

Lackmond LSE - Metal/Ductile Saw Blade - 16 Steel Cutting Tool with Vacuum Brazed Diamond Tip & 1 - 20mm Arbor - LSE161251

  • SEGMENTED CONFIGURATION – Ideal to use on ductile iron. The blade gullets aid in airflow and heat dissipation.
  • VACUUM BRAZED DIAMONDS – The diamond rim and steel core ensure the LSE series blades cut fast and have a long lifespan.
  • EXPERT DESIGN – Great for cutting metal, stainless steel, ductile iron, rebar, PVC, fiberglass, and more.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for construction workers, carpenters, general contractors, serious DIYers, and tradesmen.
  • EQUIPMENT – Designed to be used on hand grinders, circular saws, hand held saws and chop saws. Can be used wet or dry.
Check Stock

VEVOR Miter Saw Hood, 5000-L Lighted Dust Solution For Miter Saws, Chop Shop Dust Collection w/Light 110V, Dust Collector Compatible with all Miter Saws, Accessory Holes, Carrying Bag

  • ...ll not stretch or shrink. Cover size: 50" L x 25" W x 32" H..
  • User-Friendly Design: Surround LED lighting enhances visibility, security, and accuracy. Our 78.7-inch extended light line provides flexibility. Hood captures dust and directs airflow to a 4" vacuum port, and high efficiency drastically shortens clean-up time..
  • Security & Protection: Convenient cover saves your valuable time, keeping your work condition clean and dispelling billowing dust. The Interior baffle guard the escape of fine dust. Significantly reduces irritation, allergies from dust..
  • Portable & Compact: The foldable design is adopted to store and transport effortlessly. Hood comes fully assembled, mounting stanchions included, pops-up for easy installation..
  • Ideal for Table Saws: This dust cover is compact and can shape with all 10" miter saws. They are specifically designed to capture dust generated by miter saws. The hood is ideal for shop vacs, dust collectors, or installed vacuum systems..
Check Stock