Categories

Best Value Sliding Compound Mitre Saw

DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)

  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops.
  • The mitre saw features the precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically.
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch.
  • 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree.
Check Stock

MUK LUKS womens Pull on Slipper Dark Sapphire X-Large US

  • Stainless-steel miter detent plate of the 10-inch miter saw blade comes with 14 positive stops.
  • The mitre saw has a precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 4-1/4-inch base vertically.
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right.
  • 2-inch x 6-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 4-inch dimensional lumber at 45 degree.
Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

Rip Fence 080009022705 for Ridgid R4020 Job Site Tile Saw

  • Compatible with DeWalt models including:.
  • DWS779-CA 12IN DOUBL BEVEL SAW, Type 1, Type 20.
  • Contact us if you have any questions about this part or your model.
Check Stock

DEWALT Miter Saw, 12-Inch, Double Bevel, Compound, XPS Cutline, 15-Amp (DWS716XPS)

  • Stainless-steel miter detent plate with 14 positive stops delivers repeatable accuracy and worksite durability for the 12-inch miter saw blade..
  • Tall sliding fences of the mitre saw support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against fence..
  • Double-bevel design of DEWALT miter saw allows saw to bevel 0 degree - 48 degree to the left and right with positive stops at 0 degree, 22.5 degree, 33.9 degree, and 45 degree.
  • 0 degree - 50 degree left and right miter capacity.
  • Cam lock miter handle with detent override delivers quick and accurate miter angles..
  • LED work light system provides adjustment-free cut line indication for accuracy and visibility..
Check Stock

CRAFTSMAN V20 7-1/4-Inch Sliding Miter Saw Kit, Cordless (CMCS714M1)

  • POWERFUL MOTOR: 3,800 RPM motor of CRAFTSMAN miter saw is made for cutting 2X dimensional lumber, hardwoods, baseboard and trim with ease.
  • SLIDE CAPABILITIES: The mitre saw has 8-inch cross cut at 90-degree and 5-1/2-inch cross cut at 45 degree.
  • ADDED CAPACITY: The sliding miter saw cuts 3-5/8-inch nested crowns and 3-1/2-inch baseboards vertically.
  • ACCURACY AND VISIBILITY: LED cut line positioning system.
  • QUICK AND ACCRUATE: 9 casted miter detent stops for adjustments.
  • SINGLE CHARGE: Makes up to 585 cuts in 3-1/4-inch MDF baseboard** on a single charge.
  • PORTABILITY: Lightweight design with side carry handles.
Check Stock

DEWALT Miter Saw, Single Bevel, Compound, 10-Inch, 15-Amp with w/Safety Goggle (DWS713 & DPG82-11C)

  • Stainless-steel miter detent plate of the 10-inch miter saw blade comes with 14 positive stops.
  • The mitre saw has a precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 4-1/4-inch base vertically.
  • DEWALT tough Coat hard coated lens provides tough protection against scratches.
  • DEWALT Xtra clear anti-fog lens coating provides tough protection against fogging.
  • Soft, dual injected rubber conforms to the face to provide a high level protection from dust and debris.
Check Stock

wolfcraft Angular Bevel Gauge for Mitre Saws I 6957000 I For measuring and transferring angles

  • for measuring and transferring wall angles from 30 to 180 and subsequent alignment of the angle at the mitre saw.
  • automatic angle bisector for the correct mitre cut makes your work easier and reduces errors.
  • incl. telescopic corner callipers for outside corners and foldable stop for easy marking at the workpiece.
  • for measuring and transferring wall angles from 30 to 180° and subsequent alignment of the angle at the mitre saw.
Check Stock

Delta Carbon Brush Miter Table Saw Lackmond Beast 7 DPEC003807 WTS-2 Shopmaster

  • Carbon Motor Brush Set for the following Delta or Lackmond models: Delta Shopmaster: S26-260L 10" Compound Miter Saw S26-261L 10" Sliding Miter Saw....
  • Delta Homecraft: H26-260L 10" Compound Miter Saw Lackmond: Model Beast 7 WTS-2 7" Tile saw.
Check Stock

Makita XSL08Z 18V x2 LXT Lithium-Ion (36V) Brushless Cordless 12" Dual-Bevel Sliding Compound Miter Saw, AWS Capable & Laser, Tool Only

  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops.
  • The mitre saw features the precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically.
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch.
  • 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree.
Check Stock

BOSCH CM10GD Compact Miter Saw - 15 Amp Corded 10 Inch Dual-Bevel Sliding Glide Miter Saw with 60-Tooth Carbide Saw Blade, Blue

  • POWERFUL MOTOR: 3,800 RPM motor of CRAFTSMAN miter saw is made for cutting 2X dimensional lumber, hardwoods, baseboard and trim with ease.
  • SLIDE CAPABILITIES: The mitre saw has 8-inch cross cut at 90-degree and 5-1/2-inch cross cut at 45 degree.
  • ADDED CAPACITY: The sliding miter saw cuts 3-5/8-inch nested crowns and 3-1/2-inch baseboards vertically.
  • ACCURACY AND VISIBILITY: LED cut line positioning system.
  • QUICK AND ACCRUATE: 9 casted miter detent stops for adjustments.
  • SINGLE CHARGE: Makes up to 585 cuts in 3-1/4-inch MDF baseboard** on a single charge.
  • PORTABILITY: Lightweight design with side carry handles.
Check Stock

JCB - Miter Saw Stand, Extendable Beam Extension Arms for Extra Support, 3'- 5' Extension, Durable Item Compatible With Other Brands, JCB Tools

  • ...c work environment for anyone, no matter your height. This is a great tool stand to place work tools on..
  • OPTIMAL LOADING AND EXTENSION STAND: Height extendable workpiece supports from 32 - 36", width extendable workpiece supports from 40 - 65". JCB Mitre saw stand has a strong loading capacity and can withstand any compound saw - capacity with it's 440lb load capability. The quick release and attach system helps miter machine mounting and removal both quick and easy..
  • COMPATIBLE WITH OTHER MITER SAWS: This miter saw stand is compatible with almost all types of miter saws on the market. The foldable, yet sturdy design of this miter saw stand is perfect when space is at a premium, fold away for easy, space saving storage, as well as being easier to transport to other locations for professional use or around the house and yard..
  • PRODUCT SPECIFICATIONS: Weight: 29.3 pounds, Item model number: JCB-MS-ST-NA, Max. Holding Length: 200KG (440lb)"" with ""Maximum Working Load: 440lbs.
Check Stock

Monster Jam Steel Titans - Xbox One (Xbox One)

  • ACCURACY: The hand miter saw has cam-shaped pins twist and lock with honeycomb base to secure work for accurate cuts.
  • MULTIPLE CUT ANGLES: Cuts mitres on 45-degree and 90-degree angles and face angles on 45 degree and 22.5 degree for octagonal shapes.
  • Extended lip on base holds mitre box in place while cutting and a built-in saw stop helps prevent cutting into mitre box.
  • CONVENIENT STORAGE: Molded-in storage bins to hold cam pins and pencil.
Check Stock