Categories

Best Valve Compression Tool

BETOOLL 8pcs Compression Tester Automotive - Digital Compression Gauge 0-300PSI for Petrol Engine Cylinder Compression Test Tool Kit with Adapters & Hose

  • Smart Digital Gauge: Clear and accurate data showed in backlight display, with 4 different kinds of numerical units in PSI, KPA, Bar, and KG/CM², easy to control with buttons..
  • Scope of Application: Engine cylinder compression test tool kit could be used on cars, trucks, ships, ATVs, UTVs, RVs, motorcycles, snowmobiles, boats, off road vehicles, etc..
  • Quick Release Valve Design: Compression tester with release valve desgin could offer single-handed operation inflation and deflation..
  • Accurate Measurement: Digital compression gauge has 0.5 display resolution instead of normal 5PSI display resolution compression tester..
  • ALL-IN-ONE COMPRESSION TESTER KIT: 1x digital gauge, 1x extension hose, 1x straight push-on connectors, 1 x angled push-on connectors, 4x brass adapters with metric male fittings & O-rings: M10, M12, M14, M18..
Check Stock

Valve Spring Compressor, Auto Compression Clamp Tool Service Kit for ATV, Car, Motorcycle,Small Engine Vehicle Equipment,Valve Spring Compressor ToolsAutomotive Tool C Clamp Service Set,10 Pcs

  • ...ation.The forged steel construction of this set provides superior strength and hardness. The C-Clamp will not bend or twist under the stress of compressing valve springs. The oxide finish on the set components resists rust and corrosion. The surface finish of each part is smooth and provides for easy use under high compression..
  • Valve Spring Compressor Tools -come packaged in a high-impact case that holds each part securely. The parts will remain organized and safe while stored or in transport, and the case stacks and stores away conveniently.1 x Spring Compressor ""C"" Clamp ,5 x Adaptors ,3 x Extension Screws ,1 x Compression Bar ,1 x Storage Case.
  • Solid Valve Spring Compressor Kit to effortlessly reset your valve springs. The Orion Kit comes fully stocked with 5 collets to fit hundreds of makes and models, such as motorcycles, ATVs, cars, and other small engines..
  • Valve Spring Compressor Set included:(5) Metric collets – 16mm, 19mm, 23mm, 25mm, 30mm, (3) extension screws, (1) spring compressor U-clamp with a maximum jaw opening of 9.5 inches, (1) compression bar, and (1) storage case for your convenience The items are the same as the pictures.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers!.
Check Stock

labwork Universal Overhead Valve Spring Compressor Valve Removal Installer Tool for Quick Removal of Valve Springs

  • This product is designed for quick removal of the valve spring without removing the cylinder head,fit for most cars and light trucks..
  • Offset pliers facilitate clamping and compression of valve springs..
  • Surface blackened treatment,rust-proof and corrosion-resistant..
  • Perfect for removing valve springs,spring retainers by compressing the valve spring retainer and exposing the valve keeper,remove keepers,uncompress the tool then remove spring..
  • If you have any problem after receiving it,please contact us and we will solve it for you..
Check Stock

Fuel Test Kit with 1 Reusable Tester for E85, Gasoline, Race Gas, Ethanol, Ethanol-Free Fuel Test

  • 8PCS Professional Engine Cylinder Compression Tester Kit Automotive Tool Gauge,Cylinder Compression Gas Engine pressure test kit.
  • Checking Compression On Petrol Engine Quickly And Accurately，The gauge readings assist to diagnose if there are following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston..
  • Completed Kit Comes With Adapters For Most Applications，There are 16" long flexible extension hose with 4 sizes (10mm 12mm 14mm 18mm) selectable brass adapters in the engine compression test kit,.
  • Pressure release button on the side of the tester helps with easy pressure release, 3" gauge with dual color scale..
  • The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most diesel engine compression..
Check Stock

WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker

  • WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker.
  • WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker Double Coil Icemaker Water Fill Valve for Whirlpool 4318046.This valve comes with all the neccesary hardware to replace your existing valve including a plastic 1/4″ compression union, a 1/4″ plastic compression nut, a 1/4″ brass compression nut, 1/4″ brass compression sleeve, a 1/4″ x 5/16″ plastic compression union, a 5/16″ plastic compression nut, a piece of 5/16″ plastic tubing, a piece of 1/4″ plastic tubing,.
Check Stock

Yeleah Feed Water Adapter Angle Stop Adapter Valve Cold Water Supply Valve Compression 1/4 X3/8 X3/8 for Reverse Osmosis Refrigerator Ice Maker Coffee Brewers

  • 1/4"X3/8"X 3/8" Angle Stop Water Valve Adapter ,Brass Feed Water Adapter Compression Valve,Made Of One Piece Design Lead Free Brass And A....
  • 1/4"X3/8"X 3/8" Compression Valve Female Male t Valve Tee Valve Mixing Valve Adapter With Seals,Sink RO Water Line Splitter,Frigerator Ice Maker....
  • Water valve tap ,Reverse Osmosis Water Faucet Adapter Splitter,Water Line Adapter Splitter Valve 1/4" Compression Fittings Can Be Connected 1/4" Pex....
  • 1/4 Fridge Ice Maker Water Line Splitter ,Under Sink Water Valve Adapter Can onto the normal 3/8 Compression Fitting that most everyone has at the end....
  • 1/4 Angle Stop Valve Adapter Fits Most American Home Kitchen Sink 3/8"Angle Stop Valve ,Water Diverter Valve Stop Valve, Copper Line Refrigerator Ice....
Check Stock

YUHX Lead Free Brass Angle Stop Add-A-Tee Valve, Bidet 3/8 x 3/8 x 3/8 Inch Compression or 1/2 T Adapter for One-Piece Skirted Toilet , 3/8' Compression Outlet Easy Connect 3 Way Diverter

  • 1 ★【 Connect Multiple Items 】 Used for adding an outlet on existing 3/8 compression angle stop valve to supply water for faucet , dishwasher , glass rinser , bidets et.
  • Suitable for both cold and hot water systems.
  • 2 ★【 Heath and environment friendly material 】Lead free brass , chrome-plated tee valve for both potable and non-potable water . For adding an outlet on a angle stop valve for a bidet , water filtration system, dishwasher, second faucet, etc.Used for adding an outlet , Install on angle stop valve.
  • 3 ★【 Ideal 3/8 water line splitter 】1/4 turn tee stop valve,so you can freely control on-off of the branch waterway and adjust water flow size to suit your needs.
  • 4 ★【Outstanding performance】Built-in rubber ring for better sealing . It's the perfect alternative for people who have a one piece toilet where access to the 7/8 water tank valve is not possible or too cramped to reach.
  • This T-Adapter can be installed on a 3/8" OD compression threaded water supply to divert to your bidet and toilet fill valve.
  • 5 ★【 T-valve size 】3/8" OD female compression x 3/8" OD compression x 3/8" OD compression or 1/2 thread ,the 3/8 t adapter has 3 outlets , which can be used as one water inlet , two water outlets.
Check Stock

YSTOOL 8PCS Engine Compression Tester Kit Automotive 300PSI Cylinder Pressure Test Gauge Tool Set for Auto Car Truck Motorcycle Gasoline Petrol Gas Engine Diagnostic with Red Case

  • This cylinder compression tester kit is a professional tool to test the compression in gasoline engine. The readings will help to diagnosis if there are valve sticking, carbon build-up, piston or cylinder head modified, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, etc. Please note, a variation in compression readings between cylinders is often a better indication of engine problems than the absolute values of compression.
  • There are 4 sizes of brass adapters and 2PCS universal push-on connectors in the engine pressure tester kit. The 10mm 12mm 14mm 18mm adapters can be connected to the corresponding size cylinder head. The straight push-on connector and the curved one use rubber cone tip, can be pushed against on the cylinder head, universal for almost all the size cylinder head.
  • The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most d....
Check Stock

Litorange 1 Pack Lead Free Brass Mini Ball Valve Shut Off Switch, 1/4 inch Compression by 1/4 Compression Fitting

  • ★ Size: 1/4 inch compression x 1/4 inch compression valve..
  • ★ 180 degree valve closing range, the handle can close the valve by rotating it to either side of the valve body.
  • ★ Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • ★ Package include: 1 PCS 1/4 inch compression x 1/4 inch compression. Comes with 1 year warranty..
Check Stock

Litorange 2 Pack Lead Free Brass Mini Ball Valve Shut Off Switch 1/4 inch Compression by 1/4 Compression Fitting

  • ★ Size: 1/4 inch compression x 1/4 inch compression valve..
  • ★ 180 degree valve closing range, the handle can close the valve by rotating it to either side of the valve body.
  • ★ Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • ★ Package include: 2 PCS 1/4 inch compression x 1/4 inch compression. Comes with 1 year warranty..
Check Stock

KIMISS Trim Motor, Power Tilt Trim Motor 69J-43880-00 Replacement for Yamaha F200 F225 F250 LF200 200-250 H.P.

  • Ideal for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompress the tool then remove spring - ecotech lnf valve spring tool.
  • Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications - valve spring compressor tool.
  • Features a reversible jaw adaptor and an automatic cam-action locking to a pre-determind setting.
  • Allow valve springs and valve stem oil seals to be replaced with the cylinder head - valve spring compressor.
  • Ideal for removing valve springs, spring retainers by compressing....
Check Stock

(KAS) Double Coil Icemaker Water Fill Valve for Whirlpool Kenmore Refrigerator Icemaker 4318046 WV8046 2188542

  • WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker.
  • This valve comes with all the neccesary hardware to replace your existing valve including a plastic 1/4″ compression union, a 1/4″ plastic compression nut, a 1/4″ brass compression nut, 1/4″ brass compression sleeve, a 1/4″ x 5/16″ plastic compression union, a 5/16″ plastic compression nut, a piece of 5/16″ plastic tubing, a piece of 1/4″ plastic tubing, for retro fitting from garden hose connection, a mounting bracket & screws. It has 1/4″ & 5/16″ compression fittings on inlet & 1/4″ on outle.
  • Detailed installation instructions included..
  • Replacement for numbers 2002182, 4210533, 627403, 627431, 627580, 627859, 627890, 627937, 627963, 628164, 628184, 628185, 628238, 628275, 628295, 819493, 850733, 876070, 2188542, AP3103466 and PS358630..
Check Stock

ABN Auto Valve Spring Compressor C Clamp Tool Set Service Kit for Motorcycle, ATV, Car, Small Engine Vehicle Equipment

  • SAFE & EASY COMPRESSION: The ABN Auto Valve Spring Compressor C Clamp Tool Set Service Kit includes 5 adaptors to correctly fit, install, and remove automotive valve springs.
  • VARIOUS APPLICATIONS: Suitable for your motorcycle, ATV, UTV, car, and other small engine vehicles and equipment.
  • All collets are 1.75 inches (4.4cm) long with 9.5-inch (24.1cm) maximum jaw openings.
  • BUILT TO LAST: Each component is constructed from high-quality metal with a black-oxide finish for maximum strength and longevity that resists rust and corrosion.
  • EASY STORAGE: Heavy-duty 13.3” x 8” x 2.3” inch (33.8cm x 20.3cm x 5.8cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • PACKAGE CONTENTS: Package includes (5) metric collets – 16mm, 19mm, 23mm, 25mm, 30mm, (3) extension screws, (1) spring compressor U-clamp with a maximum jaw opening of 9.5 inches, (1) compression bar, and (1) storage case for your convenience.
Check Stock