Categories

Best Valve Handwheel

ICS Industries Propane Tank Service Valve PV3004S Steel 30Lb OPD Grill Bbq

  • Rapid purging and filling with over one million BTU withdrawal capacity..
  • Tri-lobular one-piece forged alluminum handwheel..
  • Double "O-ring" stem seal for improved leak resistance..
  • Quality "O-ring" check valve seat, opens only with positive seal..
Check Stock

Heavy Duty Cutting Torch, Oxygen Propane/Acetylene Welding Torch, Flame Torch Handle & Cutting Attachment with Propane Tip

  • 【HIGH PERFORMANCE】This cutting torch is mainly used to finish heavy duty work. With this kit to cut metal with thickness 1/8-inch to 5-inch and weld up to 3/8 inch, can easily finish the work ..
  • 【MULTIPLE GAS OPTIONS】 Cutting torch and handle are ready for multiple gas options.
  • Oxy-Acetylene, propane or other fuel. 2 fittings on the handle mix up oxygen and combustible gas through standard hose (inner Dia.6mm) to get cutting flame . The cutting nozzles may be different depends on the gas you are using.
  • 【HIGH QUALITY AND STABILITY】Adopts pure brass valve, stainless steel pressure handle, integrated adjustment handwheel and stainless steel stem to offer longer lifespan and higher precision . Built in non-return valve , more safety to use it ..
  • 【FULL SET】Full kit include torch handle，cutting torch and propane torch tip. Total assembled length 16inch (40mm), handle length 4.2 inch, which is very convenient to finish welding and cutting work..
  • 【WIDELY APPLICATION】Widely used in workshops, mechanical maintenance, cutting metal and welding ..
Check Stock

5V 4 Terminal CNC Eletronic Hand Wheel, 60mm Diameter Rotary Manual Pulse Generator Encoder for CNC System

  • [4 terminal]:This CNC electronic handwheel has 4 terminal, the diameter is 60mm..
  • [Easy installation]:This handwheel is easy to install and use..
  • [Application]:Widely used for CNC numerical control system, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines,etc..
  • [Durable to use]:This electronic handwheel made of high grade metal and plastic, durable and reliable to use..
  • [A great replacement]:This hand wheel is a great replacement to replace the broken one..
Check Stock

QWORK Hand Wheel with Revolving Handle, 3.94\ Round Removable Hand Crank Revolving Handwheel for Woodworking, Printing, Machinery

  • Package contents: 1 x Round handwheel (mounting screws not included)..
  • Overall Handwheel Diameter: 100 mm/3.94 in, Center hole diameter: 12 mm/0.47 in., keyway width: 4 mm..
  • Design: Swing handle, handwheel with threaded holes, easy to install and remove.
  • Easy to Insatallation: The hole size conforms to the standard shaft diameter and can be removed by tapping..
  • Application: Suitable for printing, woodworking, machinery,packaging equipment, hardware tools, especially for industrial machine tools, such as milling machines, lathes, grinding machines, etc..
Check Stock

TOAUTO Heavy Duty Cutting Torch, Oxygen Propane Acetylene Welding Torch Flame Torch Handle & Cutting Attachment with Propane Tip

  • 【HIGH PERFORMANCE】This cutting torch is mainly used to finish heavy duty work. With this kit to cut metal with thickness 1/8-inch to 5-inch and weld up to 3/8 inch, can easily finish the work ..
  • 【MULTIPLE GAS OPTIONS】 Cutting torch and handle are ready for multiple gas options.
  • Oxy-Acetylene, propane or other fuel. 2 fittings on the handle mix up oxygen and combustible gas through standard hose (inner Dia.6mm) to get cutting flame . The cutting nozzles may be different depends on the gas you are using.
  • 【HIGH QUALITY AND STABILITY】Adopts pure brass valve, stainless steel pressure handle, integrated adjustment handwheel and stainless steel stem to offer longer lifespan and higher precision . Built in non-return valve , more safety to use it ..
  • 【FULL SET】Full kit include torch handle, cutting torch, 1pc propane tip and 1pc acetylene tip （To meet different requirements) . Total assembled length 16inch (40mm), handle length 4.2 inch, which is very convenient to finish welding and cutting work..
  • 【WIDELY APPLICATION】Widely used in workshops, mechanical maintenance, cutting metal and welding ..
Check Stock

Propane Torch Weed Burner,Blow Torch,Heavy Duty,High Output 800,000 BTU,Flamethrower with Turbo Trigger Push Button Igniter and 9.8 FT Hose for Roof Asphalt,Ice Snow,Road Marking,Charcoal Black）

  • ...y, heats-up to over 3400° F with ease, 800,000 BTU of maximum heat output.Equipped with an ergonomic luxury handle to increase comfort during use..
  • ★【cCSAus Certified】This weed torch comes with a valve seal ring manufactured in Germany and a 9.8 FT hose (CSA LISTED) .Reverse thread POL safety valve with black handwheel, screwed directly into propane tank without wrench(loose by turning right, tight by turning left).Undergoes strict quality control before delivery to guarantee safety during use..
  • ★【9.8FT Hose for Extra Reach and Safe】The Weed Torch Wand comes with an extended 9.8 FT hose (CSA Listed), improving maneuverability & extension when working outdoors or on big projects.Reducing unnecessary bending and crouching while landscaping, and the chances of sustaining burns or other injury when igniting a grill or campfire..
  • ★【Durable Construction & Environmental Friendly】Three layer PVC coated rubber hose is both oil and scratch proof.100% passed the high standard leak test before leaving the factory and each has a CSA certification mark.With the AUSAIL propane weed torch you can solve the weeds between hard to reach crevice efficiently. It is Chemical Free! Do no harm to mother nature..
Check Stock

4 13/16\ Lg., Malleable Iron, Straight, Crank Handle (1 Each)

  • Made of premium material for a long time and durable, pratcial use..
  • The revolving handle is simple design, easy to install and use..
  • Revolving handwheel machine handle is simple design, but very practical in use, giving you a good using experience..
  • Perfect for printing, woodworking, machinery, food, packaging equipment, hardwares tools..
  • With smooth surface and nice polished, the revolving handwheel machine handle is neat and generous, so dont need to worry about harming your hand..
Check Stock

awagas 8\ x 8\ Lab Scissor Jack, 200mm Stainless Steel Laboratory Lifting Platform Lab Lift Table Lab Jack Stand Rack Scissor Lab-Lift Lifter, Height Range from 85mm to 280mm Load Capacity 15Kg

  • ...se plate 200*200mm. The maximum load capacity is 15KG..
  • ❥【NOTE】100% brand new. There is a protective film on the surface of the product, PLEASE peel off the protective film before use! The protective film of the product may be warped or burrs, but it does not mean that the product has been used. Tightening the handwheel helps to maintain stability. But pay attention to the rotation force, and avoid excessive force causing the handwheel to be unable to tighten..
  • ❥【DURABLE AND ANTI-CORROSION MATERIAL】Lab lifting platform is made of sturdy and high-quality stainless steel material, anti-rust and corrosion resistant, strong and durable. Stainless steel top and bottom plate is NOT magnetic, galvanized iron stand is magnetic. The platform is flat, and the edge is not sharp..
  • ❥【STEADY HEIGHT ADJUSTMENT】Stainless steel laboratory scissor jack has a very firm and steady base and a stable structure, which makes the lifting very steady and not easy to shake! The lab lifting platform is composed of an upper panel, a lower base plate, a rotating shaft, and a handwheel. Place the lifting platform steadily, and rotate the handwheel to adjust the upper panel of the lifting platform to the desired height..
  • ❥【WIDE RANGE OF USES】The laboratory lifti....
Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

  • This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
  • Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
  • The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
  • Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
  • Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
Check Stock

Mr. Heater Handwheel

  • ALUMINUM ALLOY MATERIAL: This handle is made of high quality aluminum alloy, which is thick and durable. The handle can bear the pressure of hand pressing and not easy to be worn out..
  • EASY TO STORAGE: This black hand wheel is easy to fold and store without taking up too much space. The handle is made of reinforced nylon, which is more antiskid..
  • CONFORTABLE TO USE: The surface of hand wheel is smooth and comfortable. This foldable handwheel can bring you a better work experience, let you work more comfortable..
  • CONVENIENT OPERATION: This aluminum alloy hand wheel shank has smooth surface, flexible rotation and convenient operation. This hand-wheel is mainly used for processing cutting tools..
  • NICE HANDWHEEL: A good accessory to replace your old or bad hand-wheel, let you get rid of the trouble of machine parts difficult to use..
Check Stock

Upgraded Mini Lathe 7\X14\

  • ...iron with a powerful lathe motor:550W. High grade iron construction makes it more sturdy during turning, drilling, threading and cutting processing.Two rails provides smooth and durable moving..
  • 【NEW UPGRADE DESIGN】-This upgrade mini lathe uses metal gear instead a nylon one,increase service life.Adopts aluminum handwheel is more durable than plastic handwheel,and not easy to be damaged.Digital display screen is convenient for you to follow up the processing.Add automatic power-off protection switch to make the operation safer.An extra lamp can help you finish processing in places with insufficient light.We provide one extra gear belt and free 7PCS lathe carbide tool..
  • 【PRECISION DESIGN】-Power metal lathes has large center distance 350mm(13.78") and swing over bed:180mm (7.09"),spindle bore: 21mm(0.82"). A accurate self-centering 3-jaw is supplied,for holding a variety of round or square cylindrical materials stability.The metal lathe features forward and reverse design. The variable speed of MT4 Spindle range 0-2500RPM, two speeds are available for meet your different metal workings: Low Speed 0-1250RPM, High Speed 100-2250 RPM..
  • 【PROFESSIONAL COMPOUND REST】-4-way quick change tool post  can install 4 common turning tools at the same time.....
Check Stock

Aupoko Propane Refill Adapter Hose 36’’ Propane Refill Hose with POL Type 1LB Tank Bottle Adapter and ON/Off Control Valve 350PSI Rated High Pressure Propane Extension Hose

  • Perfectly replace the 16.4 oz/1 pound small propane tank-connect the 1 pound propane equipment directly to the 5-100 pound internally threaded propane....
  • Out of the box-no need to purchase additional regulators, directly connected to gas grill, camping stove,griddle,outdoor heater, trailer, propane....
  • 1lb Propane refill adapter-add a 1lb inflation valve, suitable for all small cylinders of 1lb tanks, fill 1lb cylinders with gas from large tanks,....
  • Easy to install-don't need any tools, just use your hands, follow the instructions on the handwheel and turn it counterclockwise, you can easily....
  • 100% after sales service-If it is found to be unsuitable after purchase, or damaged in transit, you can get a 100% refund service, please rest assured....
Check Stock

Yosoo Health Gear 6 Terminal CNC Pulse Encoder, Electronic Hand Wheel Manual Pulse Generator Encoder, 5V 60MM(White)

  • [6 terminal]: This CNC electronic handwheel has 6terminal, and the diameter is 60mm/2.36in.
  • [Material]: Made of high grade metal and plastic, this electronic handwheel is durable in use and easy to install.
  • [High Performance]: High reliability, 6mm terminal connection type.
  • Ultra-thin and lightweight design, metal gear, smooth rotation, no sticking point position.
  • [Application]: Widely used for CNC numerical control system, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines, etc.
  • [100% Satisfaction]: If you have any question about this item, please feel free to contact us, we will help you within 24 hours on weekdays.
Check Stock