E1840P Sloppy Mechanics Stage 2 Camshaft LS7 Lifter 1218 Valve Spring Head Gaskets Bolts Kit for 1997-2007 LS LS1 5.3L 5.7L Engine

  • Cam and lifter kit include: 1 intake seal set, 1 timing cover gasket set, 1 valley cover gasket, 1 oil pan gasket, 2 exhaust manifold gaskets, 1 rear main seal, 1 rear main cover gasket, 2 multilayer steel cylinder head gaskets, 30 cylinder head bolts, 16 ls7 valve lifters, 16 beehive valve springs, 1 e-1840-p camshaft.
  • E1840P camshaft kit fit for 1997-2007 GM Chevy LS L92 L99 5.3L 5.7L V8 LSx Sloppy Stage 2.
  • 16pcs valve springs: outside diameter of outer spring (in): 1.290 in.
  • inside diameter of outer spring (in): 0.885 in.
  • We offer you a 12-month warranty. Any problems, just contact us through email, we ....
Check Stock

Skunk2 907-05-9051 Ultra Series Intake Manifold Spacer

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Non Heat Transfering Phenolic Material Reduces Upper Intake Manifold Temepratures for Reduced Air Intake Temperatures.
  • Cooler Intake Temperatures Allow Denser Air For Improved Performance.
  • Offers Increased Valve Cover Clearance for Larger Rockers and Valve Covers.
  • Easy to Install - Includes New Longer Hardware and 2 New Gaskets.
Check Stock

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

Engine Pro Chevy SBC 350 5.7L HP 447/447 Lift Cam Camshaft L-79 327 OEM #3863151

  • ENGINE PRO MC1713 Hydraulic Flat Tappet Stage 3 Camshaft for 1958-1995 Small Block Chevrolet Engines - 262, 265, 267, 283, 302, 305, 307, 327, 350,....
  • Direct Interchange with OEM 3863151, 350HP - 327 CID, L-79, Factory Camshaft. OEM Sound, Fair Idle with Some Lope. Mid Range Torque of 2400-3200 RPM.....
  • Advertised Duration: Intake 290 Exhaust 290, Duration @ .050": Intake 222 Exhaust 222, Valve Lift: Intake 447 Exhaust 447, Lobe Separation: Intake....
  • Great for Mild Bracket Racing When Using Stock Automatic or Manual Transmissions in Engines With 10.25:1 or Less Compression. Computer Modifications....
  • Street or strip, Engine Pro Performance Camshafts simply out perform the competition. Our manufacturing accuracy promotes improved valve train....
Check Stock

BBK 1506 3/8\ Phenolic Intake Manifold Spacer Kit for GT-40 and Cobra EFI Intake Manifolds

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Non Heat Transfering Phenolic Material Reduces Upper Intake Manifold Temepratures for Reduced Air Intake Temperatures.
  • Cooler Intake Temperatures Allow Denser Air For Improved Performance.
  • Offers Increased Valve Cover Clearance for Larger Rockers and Valve Covers.
  • Easy to Install - Includes New Longer Hardware and 2 New Gaskets.
Check Stock

GOOFIT Completed Cylinder Head Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Pit Quad Go Kart Dirt Bike

  • intake valve mounting hole distance:45mm/1.77".
  • Exhaust valve mounting hole distance:45mm/1.77".
  • Spark plug:A7TC(Please Be Carefully Check The Goods Appearance,Size,Shape Before Ordering)..
  • Completed Cylinder Head Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Pit Quad Go Kart Dirt Bike.Not Replacement for 125cc Cylinder Head with 23mm and 28mm Intake and Exhaust valves.
  • 52.4mm LIFAN 110CC 125cc Cylinder Engine.
  • Cylinders are used to hold gasoline and air,Where the mixture burns,Expands dramatically,And pushes the piston,Which transmits this force to the crankshaft..
  • High quality cylinder replacement part.High toughness,Corrosion resistance,Rustproof and durable.Has a good heat dissipation structure design,Providing reliable performance and long life service..
  • Warranty:We are always available to help our customers.If you are not satisfied with the order,please leave us a message.Wish you have a happy shopping experience,we are committed to providing the best service..
Check Stock

Big Gun Exhaust 07-1132 ECO ATV Silver Slip On Exhaust for Honda,Brushed Aluminum with coated Black tip

  • Order Includes: 2x Intake Valves, 2x Exhaust Valves, 4x Valve Springs, 8x Valve Cotters.
  • We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced..
Check Stock

BBK 1520 3/8\ Phenolic Intake Manifold Spacer Kit for Edelbrock Performer EFI 5.0L Intake Manifold

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Non Heat Transfering Phenolic Material Reduces Upper Intake Manifold Temepratures for Reduced Air Intake Temperatures.
  • Cooler Intake Temperatures Allow Denser Air For Improved Performance.
  • Offers Increased Valve Cover Clearance for Larger Rockers and Valve Covers.
  • Easy to Install - Includes New Longer Hardware and 2 New Gaskets.
Check Stock

labwork-parts Intake Exhaust Engine Valves for Ford Mazda 2.0 2.3 2.5L DURATEC DOHC 16V New

  • INTAKE VALVES: HEAD 35mm X STEM 5.5mm X LENGTH 103.5mm.
  • EXHAUST VALVES: HEAD 30mm X STEM 5.5mm X LENGTH 105mm.
  • You'll Receive 8x Intake Valve as Pictured 8x Exhaust Valve as Pictured 16x Valve Stem Seal as Pictured.
Check Stock

Engine Camshaft.585/.585 Hydraulic Roller Replace Part Number E-1840-P camshaft compatible with GM Chevy LS L92 L99 5.3L 5.7L 6.0L 6.2L 1997-2007 V8 LSx Sloppy Stage 2

  • ➽【Widely applicable】 Compatible with LS series 1997-2007 V8 engines, without AFM active fuel management. GM Chevy 1997-2007 LS L92 L99 5.3L 5.7L....
  • ➽【Valve lift】Camshaft intake valve lift: .585" exhaust valve lift: .585"..
  • ➽【Advertising duration】Advertising intake/exhaust duration: 283°/ 286°..
  • ➽【Duration parameters】Intake duration @ .050": 228°.
  • ➽【Applicable models】 Compatible with Chevrolet, year: 1997-2007. Tip: Not applicable to AFM engine..
Check Stock

A-Team Performance - Angle Plug Aluminum Cylinder Heads 64cc Chamber 205cc Intake Ports 2.020 Intake Valve 1.600 Exhaust Valve - Compatible with SBC 283 302 305 327 350 383 and 400 to 1986 Set of 2

  • Angle Plug Aluminum Cylinder Heads 64cc Chamber 205cc Intake Ports 2.020 Intake Valve 1.600 Exhaust Valve.
  • Compatible with SBC 283 302 305 327 350 383 and 400 to 1986 Set of 2.
  • These Bare Aluminum SBC heads have a 205cc Runner with 64cc combustion chambers with heart-shaped chambers..
  • Intake Valve Diameter: 2.020″ (up to 2.050 with machining, we do not offer this service).
  • Head also features a deck thickness of .625. Spring seats are cut to 1.550 diameters.
Check Stock

Air Intake Filter,Akozon 13mm/0.5in Mini Air Intake Filter Vent Crankcase Breather Universal Car Accessory(Noire )(black) for crankcase vent filter

  • APPLICABLE GEARBOX TYPES: MT/manual gearboxes are available in red, blue, silver, and black. Inner diameter: about 13 mm/0.5 inch. Outer diameter: about 50 mm/2 inches. for crankcase vent filter for pcv breather filter.
  • APPLICABLE GEARBOX TYPES: MT/manual gearboxes are available in red, blue, silver, and black. Inner diameter: about 0 mm/1 inch. Outer diameter: about 50 mm/2 inches. for crankcase vent filter.
  • EXCELLENT FUNCTION: The car air filter can increase the intake air flow, filter the impurities in the air, make the engine breathe more smoothly, prevent the dust suspended in the air from being sucked into the cylinder, and reduce the wear of the piston group and the cylinder. for 7/8" crankcase vent filter for d16 valve cover intake.
  • UNIQUE DESIGN: The unique shape reduces the air intake resistance of the engine and improves the air intake and volumetric efficiency per unit time when the engine is running. for valve cover breather for k n crankcase filter.
  • HIGH-QUALITY MATERIALS: The car air filter is made of Nonwoven Fabric, which is very breathable, very durable, and has a long service life, which enhances the ability of car air filtration. for crankcase breather filter for 301 predator valve vent filter.
Check Stock

JEGS Small Block Chevy Vortec Cast Iron Cylinder Head | Made In USA | 1 Per Package | Straight Spark Plug | 1.94” Intake / 1.5” Exhaust Valve | 170cc Intake Ports | .475” Max Lift

  • FITS ALL 1955-Present GM small blocks except LT1, LT4, and LS1-style engines.
  • UTILIZES FAST BURN COMBUSTION CHAMBERS and high-velocity intake and exhaust ports.
  • PERFORMS GREAT RIGHT OUT OF THE BOX and can be mildly ported and milled up to 0.040 inch.
  • REQUIRES A VORTEC-STYLE INTAKE MANIFOLD to complete installation.
  • SPECIFICATIONS: 1.94” intake / 1.5” exhaust valve, 170cc intake ports, .475” max lift, straight spark plug design, 3/8 “ rocker arm studs, 64cc combustion chambers, 1.25” valve springs.
Check Stock