Best Valve Socket

6.0 POWERSTROKE KC STAGE 2 TURBO (04-07)

• ◭ [Vehicle Application] : Injector Pressure Regulator Valve with Socket 6.0L Powerstroke Diesel Engines Fits for Ford 6.0L V8 Diesel Turbocharged Vehicles - for 2004-2010 Ford E-350 E-450, for 2003-2010 Ford Excursion, for 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty..
• ◭ [Manufacturer Part Number] : Direct replace factory part AP63417 1846057C1 5C3Z9C968CA 5C34-9C968-CA W3250216 CM5126 and HTV102 for a proper fit, Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035.
• ◭ [Function] : Precisely manufactured internal valves high quality diaphragms and springs to perform excellently under all engine operating conditions. Replaces Injector Pressure Regulator Valve and regulates the oil bypass circuit of the high pressure oil pump, that opens and closes to allow high pressure oil into the injectors.This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus properly control the pressure in the high-pressure oil system..
• ◭ [Material and Installation] : IPR Injector Pressure Regulator Valve, contructed of premium material for long lasting durability and reliability. Robu....

IPR Socket Tool Screen Kit - Compatible with Ford Powerstroke 6.0L Vehicles - F-250, F-350 Super Duty, Excursion, E-350 - Replaces 3C3Z9H529A, 904-415, 3C3Z-9H529-A, Injection Pressure Regulator

• Replacement IPR Valve Seal Kit With Socket Tool - The injection pressure regulator valve regulates the oil bypass circuit of the high pressure oil pump. It is an electromagnetic valve that opens and closes to allow high pressure oil into the injectors. When the oil system gets contaminated by dirt or debris, the mesh filter of the IPR valve gets torned letting the debris get in and make the plunger mechanism inside to get stucked causing the vehicle to not build up pressure..
• Compatible Replacement for Ford Vehicles - 2004 - 2005 E350 Club Wagon | 2004 - 2010 E350 Super Duty | 2004 - 2010 E450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F250 Super Duty | 2003 - 2007 F350 Super Duty | 2003 - 2007 F450 Super Duty | 2003 - 2007 F550 Super Duty | 2003, 2004, 2005, 2006, 2007 F650 | 2003 - 2007 F750 |. The oil system usually gets contaminated when the oil cooler is serviced or replaced and has not been cleaned properly..
• Replaces Part# 3C3Z9H529A, 904-415, 3C3Z-9H529-A, 904415 commonly found on popular models with the Diesel Powerstroke 6.0 engine including year models 04, 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically ....

USA SEALING ZUSA-TF-QD-A-11 Acetal Quick Disconnect Tube Fittings Straight: 1/8\ Socket, 1/8\ Male NPT

OTC 6900 Ford F-150 Spark Plug Socket Gray

• Unique and patented design works on 2004 newer Ford F-150 pickup trucks with 5.4L 3-valve Triton V-8 engines.
• Extension is part of the socket and easily fits down spark plug tube into the cylinder head.
• Soft rubber insert holds and protects spark plug during removal and installation.
• Socket has 3/8 inch drive for use with a ratchet or breaker bar.

EPAuto 12V DC Portable Air Compressor Pump, Digital Tire Inflator

• Convenience: Plug directly into Cigarette Lighter Socket of your Vehicle. 12VDC, 10 to 15 amps, 120 to 180W. Equipped with 12V-DC Cigarette Lighter Socket Plug, NOT 110V AC plug..
• Multiple Uses: Inflate tires on cars, bikes, sedan and midsize SUV. (Engine size under 3.5 liter) Universal valve connector for schrader valve is ready to use. Additional adapters include needles value (for basketball, balls), short cone/long cone adapters (for inflatable kayak, swimming pool accessories, etc).
• Capacity: Does NOT Support truck tires, for instance: light truck tires (LT), heavy duty truck tires or any truck tires..
• Easy to Read: 4 Display Units: PSI, KPA, BAR, KG/CM.
• Prevent Over Inflation: Auto shut off when reaching the desired tire pressure. Overheat protection shuts off automatically when overloading. USPTO Patent NO:D875,788.

CASTNOO Brian Tooley Racing for LS Valve Seal Installation Tool 4.8 5.3 5.7 6.0 6.2 Springs

• Application--LS Valve Stem Seal Kit For Stock Powdered Metal and Bronze Guides.
• Function--Separate Spring Locator is Required, Valve Stem Seals Keep Unwanted Oil From Entering the Combustion Chamber.
• Easy to install--Easily Install Valve Seals when changing your springs.The last thing you want to do is install valve seals using a socket and hammer.
• This seal installtion tool allows you to slowly press the seal down without damaging the seal..
• 100% Satisfaction Guarantee--If you're not 100% satisfied with this LS Valve Seal Installation Tool, simply return it for a full refund in 30 days.

OEMTOOLS 25029 Flexible Air Valve Holder Hose 14 Length Fits 14mm and 18mm Spark Plug Holes Valve Spring Tools for Air Compressor

• SAVE TIME AND PREVENT STRESS: Replace valve springs or valve stem seals without removing the engine head.
• FITS MOST VEHICLES: This air holder fits engines with either an 18mm or 14mm spark plug socket size, making it compatible with the most common....
• MORE ROOM TO WORK WITH: Easily connect the valve hose to the spark plug hole with the flexible 14 inches of hose, which is longer than some....
• THE EASY WAY TO DO ENGINE VALVE WORK: While attempting a valve spring removal or valve seal removal, use this valve holder tool to blow compressed air....
• AN ESSENTIAL PART OF A VALVE SPRING KIT: Unless you are a hobbyist wanting to take apart an engine head for educational or recreational reasons, air....

Flush Valve, Zinc Alloy Manual Automatic Wall Mounted Urinal Flush Valve for Toilet, Push Button Type

• [Practical ]: Durable manual shut-off valve, 3-10 seconds. When washing is complete, it does not leave a special odor..
• [HAND PRESSURE TYPE]: The urinal flush valve is a hand pressure valve that saves a lot of water..
• [EASY TO OPERATE]: Stable performance, piston valve technology, 1/2-inch socket outlet, easy to install..
• [ZINC ALLOY MATERIAL]: This toilet urinal flush valve set is made of zinc alloy with a chrome finish, is rust-resistant and always bright..
• [APPLICATION]: Fashionable and exquisite design, will perfectly match your bathroom, sink and wash basin. Modern and exquisite design, fits your bathroom perfectly..

Yaeccc 4500PSI Washer Ball Valve Kit, 3/8 Inch Quick Connect for Power Washer Hose

• High pressure ball valve has 3/8’’ quick connector and 3/8’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
• The max working pressure is 4500 PSI. The max working temperature is 158 F..
• The steel pressure washing ball valve kit is designed for pressure washer hose..
• Quick Disconnect Fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread.
• 3/8’’ quick coupler socket + 3/8’’ male NPT thread..
• The ball valve is easy to turn on and off. It offers great leverage under high pressure..

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

• Application: This socket set is designed for the removal inspection or replacement of heated and non-heated oxygen sensors fitted to the following vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda. These sockets feature cut-away sections allow some sockets to fit over wiring harnesses, complete with the black phosphate finish for a durable design..
• 3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8’’ hex and some oxygen sensors.
• 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
• 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
• 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
• 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
• 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.

RIDGE WASHER High Pressure Ball Valve Kit for Power Washer Hose, 3/8” Quick Disconnect, 4500 PSI

• High pressure ball valve kit includes a ball valve and two adapters. The adapter set converts 3/8” quick coupler plug to 3/8” male NPT thread and 3/8” quick coupler socket to 3/8” male NPT thread..
• Working pressure is up to 4500 PSI. The max working temperature is 158 °F..
• The steel pressure washing ball valve is superior leak resistance. Easy to connect ball valve to gun, pump and hose..
• The ball valve is easy to turn on and off, provides good leverage under high pressure, designed for high-pressure hose..
• If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

• Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
• Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
• Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
• Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.

Tool Daily High Pressure Washer Ball Valve Kit, 3/8 Inch Quick Connect for Power Washer Hose, 4500 PSI

• High pressure ball valve has 3/8’’ quick connector and 3/8’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
• The steel pressure washing ball valve kit is designed for pressure washer hose..
• The max working pressure is 4500 PSI. The max working temperature is 158 F..
• The ball valve is easy to turn on and off. It offers great leverage under high pressure..
• Quick Disconnect Fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread.
• 3/8’’ quick coupler socket + 3/8’’ male NPT thread..