Categories

Best Valve Springs

OTC 4573 Universal Overhead Valve Spring Compressor

  • OTC's Universal Overhead Valve Spring Compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem....
  • Ideal for use on installed cylinder heads, especially in vehicles with tight underhood clearances, but can be used for bench work as well.
  • Spring loaded jaws easily grip and compress valve springs.
  • Legs designed with a built-in offset to compensate for spring wind - keeping tool vertical and stable during use.
  • fits valve spring retainers up to 1-13/16 inch diameter.
Check Stock

Kibblewhite Precision Crf450f 02-06 Full Top End Kit Crf450r 30-32700 New

  • These kits give your bike a performance boost.
  • Kits include all necessary parts for a complete top end service/ rebuild: pistons, piston rings, piston pins, gaskets, valves and valve springs.
  • Pistons fully machined from 2618 aluminum alloy with a performance skirt coating.
  • Black Diamond or White Diamond engine valves (depending on application).
  • Lightweight racing valve springs kit with titanium valve spring retainers, dual springs and H.T..
Check Stock

Valve Spring Compressor, Auto Compression Clamp Tool Service Kit for ATV, Car, Motorcycle,Small Engine Vehicle Equipment,Valve Spring Compressor ToolsAutomotive Tool C Clamp Service Set,10 Pcs

  • Valve Spring Compressor C Clamp Tool Set Service Kit includes 5 adaptors to correctly fit, install, and remove automotive valve springs,Suitable for your motorcycle, ATV, UTV, car, and other small engine vehicles and equipment.
  • All collets are 1.75 inches (4.4cm) long with 9.5-inch (24.1cm) maximum jaw openings.
  • Valve Spring Compressor Small Engine, This toolset is used to easily and safely compress valve springs for removal or installation.The forged steel construction of this set provides superior strength and hardness. The C-Clamp will not bend or twist under the stress of compressing valve springs. The oxide finish on the set components resists rust and corrosion. The surface finish of each part is smooth and provides for easy use under high compression..
  • Valve Spring Compressor Tools -come packaged in a high-impact case that holds each part securely. The parts will remain organized and safe while stored or in transport, and the case stacks and stores away conveniently.1 x Spring Compressor ""C"" Clamp ,5 x Adaptors ,3 x Extension Screws ,1 x Compression Bar ,1 x Storage Case.
  • Solid Valve Spring Compressor Kit to effortlessly reset your valve springs. The Orion Kit comes fully stocked with 5 collets to fit hundreds of makes and models, such as motor....
Check Stock

16 Pack Performance Beehive Valve Springs Kit Compatible with 2002-2017 Cadillac CTS Chevrolet Camaro Corvette SS SSR Trailblazer Pontiac G8 GTO Fit for Engine LS1 LS2 LS3 LS6 LS9 8 Cyl Part# 12499224

  • ✅【VALUABLE CHOICE】 ➤ Durable material to meet or exceed OE standard quality. ➤ Valve spring assembly with superior strength, durability and valve train stability, no matter what the application. Easily handle the increased lift in extreme stress applications. ➤ Durable construction delivers long-lasting valve springs. ➤ Decent price for valve spring kit Set of 16..
  • ✅【FIX VALVE SPRINGS FAILURE SIGNS】Engine misfire, Tapping or ticking noise, Backfire, Compression loss..
  • ✅【SPECIFICIATION VALVE SPRINGS】➤ Beehive-style, Complete Set of 16 ➤ Outside diameter of outer spring: 1.290 in ➤Coil Bind Height 1.220 in ➤ Spring rate: 375 lbs./in ➤ Max lift .550''.
  • ✅【EXCAT MATCH】 Fit for GM Engine: LS1, LS2, LS3, LS6, LS9, 8 Cyl ➤Compatible with Cadillac CTS 2004-2007 5.7L 6.0L ➤Compatible with 2010-2015 Chevrolet Camaro 6.2L ➤Compatible with 2002-2013 Chevrolet Corvette 5.7L/6.0L/6.2L ➤Compatible with 2014-2017 Chevrolet SS 6.2L ➤Compatible with 2005-2006 Chevrolet SSR 6.0L ➤Compatible with 2006-2009 Chevrolet Trailblazer 6.0L ➤Compatible with 2009 Pontiac G8 6.2L ➤Compatible with 2005-2006 Pontiac GTO 6.0L.
  • ✅【OE PART NUMBER】Single spring: 12625033.
Check Stock

COMP Cams 4758-2 Checking Springs

  • Set of two springs is enough for one cylinder.
  • Simplify measuring piston-to-valve clearance, rocker ratio, cam degreeing, etc..
  • Low tension checking springs can be installed by hand in place of valve springs.
Check Stock

COMP Cams 26918CS-KIT LS Engine Beehive Valve Spring Kit

  • Kit includes part #26918-16 Beehive valve springs and matching steel retainers, 7 degree valve locks, valve seals and spring seats.
Check Stock

labwork Universal Overhead Valve Spring Compressor Valve Removal Installer Tool for Quick Removal of Valve Springs

  • This product is designed for quick removal of the valve spring without removing the cylinder head,fit for most cars and light trucks..
  • Offset pliers facilitate clamping and compression of valve springs..
  • Surface blackened treatment,rust-proof and corrosion-resistant..
  • Perfect for removing valve springs,spring retainers by compressing the valve spring retainer and exposing the valve keeper,remove keepers,uncompress the tool then remove spring..
  • If you have any problem after receiving it,please contact us and we will solve it for you..
Check Stock

Valve Spring Shim - 1.500\ OD.645\ ID .060\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1.500" Outside Diameter, 0.645" Inside Diameter. Includes 1 0.060" Thick Shim..
  • Recommended for use with our 916, 26056, 917, 928, 929, 924, 925, 911, 954, 936, 938, 930, 953, 999, 26094, 943, 26055, 939, 927, 919, 933, 935, 944, 26095, 26097, 932, 26089,955, 26115, 26099 and 26547 springs..
  • Available in an assortment pack under part number 4757..
Check Stock

Stud Mount Valve Spring Compressor Fits For All 3/8 and 7/16 Rocker Studs Alternative to Part # 66784 62370

  • APPLICATION: Universal valve spring remove tool fits for all 3/8'' and 7/16'' rocker studs, specially designed for compressing valve springs with the....
  • FUNCTION: Simplifies between-rounds valve spring changing. Easily and quickly replace valve springs, remove valve spring from an assembled engine for....
  • Easy to use: The tool disassembles easily. Use the principle of leverage, press down to compress coil spring, then remove valve keepers, and release....
  • MATERIAL: Made of heavy-duty steel, treated with anti-rust and anti-corrosion, solid and durable. A strong, durable handle withstands the most extreme....
  • Satisfaction Guarantee--100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product..
Check Stock

BLACKHORSE-RACING Beehive Valve Springs Kit .560\ Lift w/Locks Retainers Seals Compatible with Chevrolet GEN III IV LS Engines 4.8 5.3 5.7 6.0 6.2L LQ4 LQ9 LS1 LS6

  • Beehive valve springs kit. 100 lbs @ 1.800".
  • Package includes retainers, locks, and top hat valve stem seals.
  • Compatible with GEN III / IV LS style engines (4.8L, 5.3L, 5.7L, 6.0L, 6.2L). LQ4 LQ9 LS1 LS6 Valve Springs.
  • Beehive design valve springs kit, made of high quality material for premium strength and durability.
  • Engineered and tested to meet or exceed original equipment standards and performance.
Check Stock

Tanstic 12Pcs Valve Spring Compressor with Valve Lapper Set Auto Compression C-Clamp Tool Service Kit with Valve Lapping Grinding Stick Tool for Motorcycle, ATV, Car, Small Engine Vehicle Equipment

  • 【Package Includes】Tanstic 12pcs valve spring compressor set contains everything you need to remove and compress valve springs: 1pc solid valve spring compressor including 1pc wide C-clamp, 3pcs extension screws, and 5pcs pusher adapters in 5 sizes and 1pc hand level, 2pcs valve lappers. Practical set for easier work..
  • 【Valve Spring Compressor】Each component is made from forged steel which guarantees superior strength and hardness, so that our C-Clamp will not bend or twist under the stress of compressing valve springs. Compressor surface is oxide finished for rust- and corrosion-resistance. Quality material for longer service life..
  • 【Practical Size】Multiple adapters and pusher can meet your different auto mechanical needs. Valves for the Following Sizes: 16mm (OD.) 19mm (OD.), 25mm (OD, 30mm (OD.). Also with hard plastic storage case for easy carry, safe storage, and quick organization..
  • 【Valve Grinding Lapping Stick】This tool set helps matching valve seats during the engine top-end is rebuilding. Suitable to aid in cleaning of carbon deposits off valve seats. Hardwood long Easy-grip handle for better control, less fatigue and more productivity. Rubber grinding head is easy to use and wear-resistant..
  • 【Wide Application】Tanstic 12pcs s....
Check Stock

Valve Spring Compressor for Dodge 5.7, 6.1, 6.2 and 6.4L HEMI

  • Designed specifically for Dodge 5. 7, 6. 1, 6. 2 and 6. 4L HEMI.
  • Allows for the easy removal and installation of valve springs without the need to remove cylinder heads.
  • Bolt-down design makes for a quick and easy install, while a unique lead screw and cage design compresses the spring, freeing up your hands for easy access to the valve locks.
  • The spring cage is compatible with factory and most aftermarket valve springs.
  • Manufactured from high-strength billet steel that will not bend or wear out like competitors' inferior aluminum valve spring compressors.
Check Stock

67605 Valve Spring Compressor Tool Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM Trucks

  • Bolts and nuts Kit built from 3/8" Steel and Precision CNC Machined for a great fit and Durability. Performance levels are 10.9, 10.9 and 12.9, much better than the other 8.8..
  • Upgrade manufacturing, T - shaped parts are marked with "TOP" for ease of use. This Valve Spring Compressor Kit is a great helper to remove old stock valve springs and install new valve springs..
  • This tool kit is for 4.8, 5.3, 5.7, 6.0, and 6.2L LS Engines and is a must when it comes time to install a new set of valve springs!.
  • OE 67605, will be compatible with any LS engine for Firebird, Silverado, Camaro, GTO, Trans am, Corvette, CTSV, Sierra, Tahoe, Suburban, Pontiac G8 GT and more. Also compatible with Dodge Ram 318 360 5.2 5.9 Engine (but need to use your original bolts)..
  • *Springs are not included in the product. Read the instructions included in the package first. Tips: Adding lubricant will work more perfectly. It is not recommended to buy cheaper alternatives, which will not last long. Thanks!.
Check Stock