Refrigerator Water Line Kit - 25FT Ice Maker Tubing with Tee Stop Valve，Flexible Hose with 1/4 Compression Fittings for Potable Drinking Water
- 【Potable Drinking Water Use】:Our refrigerator water line is BPA free，made by food grade materials, non-toxic ingredients,odorless and....
- 【Multiple Applications】:The hose is perfect for linking existing 1/4" outlet angle stop valve or other water supply to Ice....
- 【Moderate Hardness and Durable】:Our 1/4" OD（Outside Diameter）ice maker tubing is flexible but not soft, running through limited spaces....
- 【Easy Installation】:The water line had the preformed ends and each end with brass 1/4" compression fittings,even DIY,your first installation or....
- 【Includes tee stop valve and instructions】:Our ice maker installation kit includes a 3/8"- 1/4"- 3/8" tee stop valve, you can add a branch....
Check StockYeleah Feed Water Adapter Angle Stop Adapter Valve Cold Water Supply Valve Compression 1/4 X3/8 X3/8 for Reverse Osmosis Refrigerator Ice Maker Coffee Brewers
- 1/4"X3/8"X 3/8" Angle Stop Water Valve Adapter ,Brass Feed Water Adapter Compression Valve,Made Of One Piece Design Lead Free Brass And A....
- 1/4"X3/8"X 3/8" Compression Valve Female Male t Valve Tee Valve Mixing Valve Adapter With Seals,Sink RO Water Line Splitter,Frigerator Ice Maker....
- Water valve tap ,Reverse Osmosis Water Faucet Adapter Splitter,Water Line Adapter Splitter Valve 1/4" Compression Fittings Can Be Connected 1/4" Pex....
- 1/4 Fridge Ice Maker Water Line Splitter ,Under Sink Water Valve Adapter Can onto the normal 3/8 Compression Fitting that most everyone has at the end....
- 1/4 Angle Stop Valve Adapter Fits Most American Home Kitchen Sink 3/8"Angle Stop Valve ,Water Diverter Valve Stop Valve, Copper Line Refrigerator Ice....
Check Stock
Unisex Adult Steampunk Gas Mask Costume Accessory, Gold, One Size
- TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
- SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
- MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
- LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
- WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check StockSUNGATOR Angle Stop Add-A-Tee Valve, 3/8
- Lead Free Brass: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet..
- Wildely Used: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc..
- Durable: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products..
- Better Sealing: Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
- Package Includes: 3/8 Inch Lead Free Add-A-Tee Valve (2 pcs).
Check StockI Love My Cow Valve EKG Heartbeat Heart Patient Moo T-Shirt T-Shirt
- You are born with pulmonary or aortic valve disease, expecting valve surgery, or recovering from surgery this shirt is for you and your cow valve. Heart patients stay strong and hopeful in cardiac rehab on the treadmill getting stronger wearing this shirt.
- Featuring a bovine valve eating grass ekg. So cute. Say Moo. You have a cow valve and my new heart loves me. Remember your post-op recliner chair sleeping fondly and stay focused with your heart healthy recover plan. Gift this tee to heart survivors!.
- Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock
Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting
- ...e special design of 1/4" basic swivel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
- HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
- TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries..
- CONNECTORS & ADAPTORS - The kit includes 4 x MNPT Plugs, 4 x FNPT Plugs, 2 x FNPT Couplers, 2 x MNPT Swivel Plugs, 1 x MNPT Coupler, 1 x Male Coupling, 1 x Ball Valve, 1 x Tee Brass ....
Check Stock
mistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)
- Features: Base 20 Nozzle Kit Contains: - 1 - Max1500 psi High pressure pump with built-in water on/off valve, low water cut off switch, pressure bypass, commercial 5-micron filtration, Outdoor Rust Proof Enclosure with on/off Switch.
- - 60ft 1/4" Nylon Tubing-Black - 20 - HP Push Lock Misting Tees.
- - 20- Stainless Steel Orifice Nozzles (0.006") - 1 - Push Lock End Plug - 2- Nozzle plugs - 2- Replacement Nozzles - 1- Drain Valve Assembly - Stainless Steel Mounting Clamps.
- Specs:1500 PSI Misting Pump: 0.15 & 0.30 GPM - For up to 40 Misting Nozzles - Pressure Adjustment Valve to allow increase or decrease of the outlet water pressure. - Pump pre-set for ideal working - Solenoid Valve – controls flow of water in the misting pump - Pressure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
- Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
- However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
Check StockRound Metal Hydraulic Reservoir (6 Quart) (To insure proper fit check dimensions in image at left.)
- 1x11 STAINLESS STEEL Tank Tee with UNIOn.
- Liquid Filled Stainless Steel Pressure Gauge.
- 1/2" Stainless Steel Pressure Relief Valve.
Check Stock3/8 Compression Tee Valve, Standard Angle Tee Valve, 2 PCS Brass Tee Adapter 3 Way Valve Compression 3/8'' Inlet and 3/8'' Outlet, Lead Free Brass Angle Stop Valve, 3/8 Add-A-Tee Valve Connector
- 【Lead Free Brass】Heath and environment friendly material. Lead free brass tee adapter 3 way valve compression 3/8″ inlet and 3/8″ outlet..
- 【Advantage】Brass for corrosion resistance, have a longer using life than iron and iron galvanized products, high temperature ductility and low magnetic permeability. Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
- 【Multipurpose & Easy Installation】Used for adding to an outlet water shut off valve with a washer, toilet bidet, faucet and sprayer hose etc..
- 【Size】US standard. Thread size is 3/8″ ( also name 9/16″ ) female thread, 3/8″ male thread. Rubber gasket included..
- 【Package Included】3/8 Inch lead free add-a-tee valve ( 2 pcs )..
Check StockFrizzlife IMC-2 Ice Maker Fridge Water Line Installation Kit Fits For 3/8” Braided Hose Connection Braid Hose Connect Water Filter System
- ✔COMPATIBILITY: Compatible with 3/8" braid hose connect water filter system. Fits for Frizzlife MK99 Under Sink Water Filter System.
- ✔MULTI-USAGE: Provides pure water from your water filtration system to your ice makers, refrigerators, water coolers, fridge dispensers and more. The T fitting allows the system to function for both application with no loss in performance..
- ✔COMPLETE ICE MAKER WATER LINE KIT: 20feet NSF certified 1/4" tubing, Brass Tee valve, and TWO sets of compression fitting nut..
- ✔TOOL-FREE INSTALLATION: Easy DIY installation with no tools required..
- ✔HIGH QUALITY COMPONENTS & 100% SATISFACTION: Superior high strength Tee valve ensure long lasting and a guaranteed leak free experience..
Check Stock
Wasser Vela Outdoor Cool Misting System, 30 Feet Starter Kit, Metal Nozzle, for Patio, Backyard, Gazebos, Swimming Pool
- Components: 30FT x PE Misting Tube, 1 x 1"-3/4” Tap Adaptor, 1 x Joiner Fitting, 1 x Elbow Fitting, 1 x Tee Fitting, 1 x Misting Elbow, 6 x Misting Tee, 6 x Brass/SST Misting Nozzle, 1 x Auto Drain Valve, 5 x Clip Strip, 10 x Nail Clamp.
- Easy assembly. Leak-proof drain valve. High quality UV treated tubing, resistant to yellowing hydrolysis. Great for cooling your outdoor living areas - The Misting Nozzle is made of precision brass/stainless material with foggy spraying for cooling..
- Fits US standard tap thread. If you are buying from the country other than USA and Canada, please contact us first for further information..
- Cooling - The outdoor cooling system provides a cool environment for your favorite outdoor area, reducing the ambient air temperature about 6°C (20°F)..
- Wide application - atomization cooling system is widely used in gardens, trampoline water parks, landscaping, greenhouses, humidification, outdoor cooling systems, swimming pool atomization cooling, etc..
Check StockYUHX Refrigerator Water Line Kit - 25 FT Fridge/Ice Maker Installation Kit,1/4 Compression Water Line Splitter Quick Connector Fittings
- ❶【 Suitable for Potable Drinking Water 】Our ice maker installation kit is BPA free, odorless and tasteless, made by food grade materials, ensure....
- ❷ Our refrigerator water line kit includes 3/8" or 1/2 - 1/4" tee stop valve and 1/4" 1/4" inline shut-off valve, you can add a branch waterways on....
- ❸【 Multi-function】Tap into your existing shut-off valve from under kitchen sink for fridge connection , RO system feed ,water filter system feed....
- ❹【 No Drilling and No Damage to Water Pipes】Our ice maker water line kit can be water line connection from an existing water supply valve &....
- ❺ 【Easy Installation】The fridge connection kit will work with any Reverse Osmosis RO system or filtration system that uses standard 1/4" tubing,....
Check StockHarvard Boshart 1 x 11 BRASS Tank Tee Kit installation package with BALL VALVE and CHECK VALVE Water Well Pressure Tank SQUARE D 4060 FSG2 pressure switch NO LEAD
- (1) 1" x 11" Tank Tee(SOLID BRASS, NO LEAD CONSTRUCTION).
- (1) Square D 30-50 Pressure switch, 40-60 available in other listing.
- (1) 1/2" 100 psi Brass Pressure Relief Valve.
- (1) Roll of 3/4" x 520" 3.5 mils Thread tape.
Check Stock
