Best Valve gas Regulator gas Pressure Regulator
SPARC Premium Dual Output CO2 Regulator CGA320 2YR USA Warranty Beer Kombucha
- EASY INSTALLATION: All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 2 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal. Replace washers regularly..
- PROFESSIONAL GRADE: This CO2 Regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure in both of your systems via a control knobs in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety Pressure relieve valve/Chrome Shut Off Valve to prevent beer from backing up into the gas lines..
- VERSATILE APPLICATIONS: Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed Gas Outlet Fitting Allows easy connection to many gas line types..
- HEAVY DUTY WITH TRIPLE GAUGES: SPARC 2 Stage CO2 Pressure Regulator is a heavy duty piece made with triple gauges to accurately measure working pressure in 2 systems simultaneously and 1 gauge showing CO2 tank pressure..
- WARRANTY: SPARC 2 Year USA Warranty. Call us with any problems!.
Check StockRobertshaw 700-503 Millivolt Gas Valve, 250 To 750 Millivolts
- Adjustable servo regulator effectively maintains almost constant gas output pressure under wide fluctuations in gas supply pressure.
- Natural to lp and lp to natural conversion kits available for standard and slow opening gas valves.
- Description: 24 vac dual intermittent pilot, slow opening gas valve with 3/4 in. X 3/4 in. Inlet/outlet, standard opening and 3.5 in. Wc pressure regulator setting.
Check StockMRbrew Efficient Adjustable Beer Faucet Kit, Adjust/Control/Regulate Beer Flow Rate, Heavy Duty Commercial Brewing Kegging Stainless Core Adjustable Draft Kegerator Keg Tap Kit for Beer Tower Shanks
- 1.Include: Beer Keg CO2 Regulator CGA320, Red Gas Line, Worm Clamps, 5/16" Swivel Nuts, Ball Lock Gas Disconnect MFL.
- 2.Material: PVC Material for Gas Line, Stainless Steel Material for Clamps, CO2 Regulator and Swivel Nuts, Plastic Material for Ball Lock Disconnect.
- Connect tips: Tighten the Clamps when it Connects the Beer Gas Line will guarantee no Leak.
- 4.Gas Gauge: 0-60 PSI and 0-3000 PSI, Manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator.
- 5.Guarantee: Quality Guarantee, any problem for CO2 Regulator with ball lock and gas line set, Money Back or Replacement free..
Check StockSKYTOU Dual Gauge CO2 Regulator, Keg Beer Regulator CGA-320 Inlet for Draft Beer Homebrew Kegerator Dispensing Regulator
- ❤【Double Gauge】: The top gauge (0-60psi) of this CO2 regulator shows you how much pressure is being provided to the kegs, the side gauge(0-3000psi) of this CO2 regulator shows you how much CO2 is left in your cylinder/tank..
- ❤【Compatible & Safe】: This CO2 regulator works with any CO2 tank with a CGA-320 valve. It comes with a CGA-320 Female thread and a shut off valve allows you to turn the gas flow on / off and prevents liquid from backing into the regulator..
- ❤【Premium Material】: The Draft Beer Dispensing CO2 Regulator adopts to food grade high-strength copper chrome decompression material and sturdy rubber boots that help protect them from damage. And Inside Safety Pressure Relief Valve springs also have high fatigue strength and durability..
- ❤【Easy To Install】: Slap this CO2 regulator on a food grade CO2 tank, connect a gas line ( ID 5/16' or 3/8”) and carbonator, and you have a lot cheaper carbonated water than buying carbonated water bottles directly..
- ❤【Suitable Occasions】: Particularly suitable in a Shop,Bar,Home,Out Door,Plants etc.....
Check StockNitrogen Regulator with 60' Hose for HVAC Purge, 0-800 PSI Output Pressure, CGA580 Inlet Connection and 1/4'' Male Flare Outlet Connection
- 【Connection】CGA-580 Inlet Connection fits standard Nitrogen, Argon, Helium, and Inert Gas Tanks from any supplier.1/4" Male Flare Outlet Connection fits HVAC Charging Hoses for Purging ,Pressure Testing and High-pressure lines..
- 【Accurate Pressure Gauge】The Nitrogen Gas Regulator has two Easy to read pressure gauge,covered with scratch-resistant plastic protective film and rubber cover.Input: 0-4000PSI.Output: adjustable 0-600PSI.The display show 800PSI that you can rate them at 600PSI, but they are able to go up to 800PSI..
- 【Durable Construction】Our Nitrogen Regulator is made of solid brass,so the surface can keep good looking in a long time. Precision thread design ensures high sealing performance and avoids gas leakage. You can adjust the nitrogen regulator smoothly and accurately through the T-handle to prevent galling..
- 【Application】The Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas stored in a tank.It is great for HVAC purging,pressure tests,inertization,leakage tests,and Soldering,like the accurate reading of Nitrogen Regulator would help you to adjust pressure before HVAC puring..
- 【Filter Structure】A filter structure is used at the connection, which can effectively ....
Check StockMCAMPAS 10 Feet 1/2 ID Natural Gas Quick Connect Hose and Regulator Replacement for Kitchen-Aid 710-0003 Gas Grill Conversion Kit,Convert 4-Burner Cabinet Style Gas Grill to Natural Gas
- Natural gas hose and regulator for Kitchenaid gas grill conversion connection kit includes 10-foot length 1/2 inch ID natural gas hose with quick....
- 10 feet 1/2" ID gas quick connect hose with 1/2" male quick plug, 3/4-16 UNF female flare fitting on the other side.
- 5.9" manifold gas regulator hose kit - 1/2 PSI(3.5 Kpa) natural gas regulator valve. Can be switched manually natural Gas Or Propane gas regulator....
- Compatible with converts these kitchenaid grill models to natural Gas: 720-0709, 720-0709B, 720-0709C, 720-0733, 720-0733A, 720-0745, 720-0745A,....
- Used to convert the home's natural gas pipeline or large LP gas Gas tank cylinder quick connection to existing low pressure supply gas grill....
Check StockHoneywell International VR8200A2132 Valve
- Includes: One 1/2″ x 3/8″ straight busing, one 3/4″ straighr flange, one hex wrench, one pilot compressing fitting for 1/4″ O.D. tubing, 393691 Natural to LP gas conversion kit.
- Gas valves include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
- Solenoid-operated first automatic valve opens on thermostat call for heat.
- Diaphragm-operated second automatic valve opens under control of regulator.
- closes if gas or power supply is interrupted.
Check StockTeeJet 23120-3/4-PP Pressure Regulator with 200 PSI Pressure Gauge (Bundle, 2 Items)
- Gas Type- 2 Positions, LPG 10" W. C & NG 4" W. C, Max inlet pressure PSI: 1/2 (3.5KPa), Gas Flow: 120,000BTU/ Hr. Adjustable outlet pressure 4" &10" Water Column..
- Fitting- in 1/2" x out 1/2" NPT Pipe threads. When apply to LP gas, it needs to work with an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator..
- Safety - Our Pressure Regulators Pass CSA certificate for your safety. no gas leaks, ensures safety while using grill, air flow is kept stable and at appropriate levels..
- Applications- Stable Gas flow, for Natural LP Gas grills, heater, oven, Gas Welding Equipment, NG gas pressure regulator.
- Please take the Hex Screw out to check it's the correct side for your application. LP side and NG side is different. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator..
Check StockCGA580 Argon CO2 Regulators Argon Gauges Gas Welding Regulator Compatible with Mig Tig Miller Lincoln Weld 0-4500PSI / 0-10BAR - CO2 Argon Regulator with 6.6Ft Hose
- Universal Gas Welding Regulator - This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). Argon gauge 0 to 4500 PSI, argon gauge regulator provides accurate regulation of gas flow. This Gas Hose Is Ideal For Fitting Mig And Tig Welding. Ideal for commercial, industrial and laboratory applications.
- 100% Brand New Argon Regulator with Hose - The CO2 regulator body is made of brass, Single-stage regulator, built-in pressure overload automatic degassing device. Large T-shaped adjustment handle, easy to adjust the pressure by hand. The flow tube is made of polycarbonate.
- Accurate Argon Regulator with Pressure Gauge - CGA580 fitting (15/16" Male Thread), 9/16" male thread, 5/8" female thread. Argon gas meter measuring range: 0 to 4500 PSI. Argon CO2 Regulators Gauges Gas Welding Regulator With 6.6Ft Gas Hose. 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
- Reliable CGA580 Argon CO2 Regulator - The Argon CO2 flowmeter regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings and has an internal safety relief design, Provides a safe environment for car driving. CO2 regulator with 2" dual gauges that will be easy to read.
Check StockLUCKEG CGA580 Nitrogen Beer Regulator Dual Gauge Gas Air Pressure Regulator with 0-100 PSI Delivery Pressure Premium Double Gauge Nitrogen Keg Regulator with 5ft Gas Line and Free Worm Clamps
- 1.Include: Draft Beer Regulator CGA580(1 PCS), 5ft Red Gas Line 5/16" ID, 9/16"OD(1 PCS), Free Worm Clamps(2 PCS).
- 2.Material: Metal for Nitrogen Regulator, PVC Material for Gas Line, Stainless Steel Material for Clamps.
- 3.Connect tips: Tighten the Clamps when it Connects the Beer Gas Line will guarantee no Leak.
- 4.Gas Gauge: 0-100 PSI and 0-3000 PSI, Manual pressure release valve releases extra pressure at 45 PSI, Recommended pressure is 15-30 PSI which keeps you safe when you operate regulator.
- 5.You will be protected by our hassle free guarantee. If you have any problem about Nitrogen Regulator, please feel free to contact us, we'll help you solve it until you are satisfied..
Check StockKeg Regulator, Kegerator Regulator, Beer Regulator, Co2 Tank Regulator, Beer Keg Regulator, Co2 Regulator Gauge with CGA-320 Inlet, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure By MRbrew
- ????【No Leaks】The co2 regulator wears two tank washers to prevent leakage of the connection between the tank and the c02 regulator.
- The relief valve on the keg regulator also has a food grade silicone washer to prevent leakage of the relief valve..
- ????【Maintains Consistent Pressure】The lock ring can be quickly locked without re-adjustment, And maintains steady Co2 pressure with no leaks. Sturdy durable dual gauge beer regulator features a multi-stage body that gives you more precise control when making small adjustments to the output pressure..
- ????【Easy to Adjust & Read】The kegerator regulator is easily adjustable by hand, Making adjustment effortless even at freezing temperatures. Whether it’s a bar, camping or family gathering, this beer keg regulator is your best choice..
- ????【Relief Valve & Shut Off Valve】For added safety, The tap regulator has a manual pressure release valve that releases pressure at 55-65 PSI. There is also a shut off valve on the co2 pressure regulator that allows for instantly shutting off pressure to the keg without backing up your gas line and prevents backflow into the beer keg regulator..
- ????【Care-free Warranty】Please feel free to contact us if any problem, we would try our best to h....
Check StockNitrogen Regulator 0-600PSI CGA580 Inlet, 1/4-Inch Male Flare Outlet Connection, Heavy-Duty Handle, Self-reseating Relief Valve, Nitrogen Regulator Hvac, Helium Regulator, by NAKAO
- ➤Application: Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas that is stored in a pressurized tank.great for HVAC Purging / Inertization / Pressure Tests / Leakage Tests / Brazing / Soldering.
- ➤Accurate Pressure Gauge: Nitrogen regulator hvac, there are two Easy to Read 2 Inch pressure gauge, which covered with scratch-resistant plastic protective film and rubber cover. 0-4000PSI cylinder gauge, 3000PSI of Max input pressure, 0-600PSI output gauge, 500PSI of Max output pressure. 600PSI of safety output pressure..
- ➤Connections: Helium regulator, CGA-580 Inlet Connector, fits all Nitrogen, Argon, Helium, and Inert Gas Tanks, 1/4" SAE Male Flare Outlet Connection - 7/16-20 Threads for easy installation.
- ➤Structure: Nitrogen Regulator 0-600PSI CGA580 Inlet, Solid brass, Durable brass piston designed diaphragm, self re-seating relief valve (not designed to protect downstream system),Large brass Tee Handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
- ➤Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!.
Check StockAupoko Natural Gas Conversion Kit for Grill 10FT 1/2 ID Natural Gas Quick Connect Hose Natural Gas Regulator 1/2 Quick Connect Disconnect Adapter 3/8 Fitting Convert Propane to Natural Gas
- 【Natural gas to propane conversion kit】The propane to natural gas conversion kit includes 5.9-inch natural gas regulator hose adapter, 10-foot....
- 【Two gas regulation modes】5.9" manifold gas regulator hose kit. Note: The original mode of the regulator valve is the propane gas regulator valve....
- 【CSA certification hose】10 feet 1/2" ID natural gas quick connect hose, Equipped with 1/2" female pipe thread to 1/2" female quick connect....
- 【Compatible with】Natural gas hose and regulator kit, perfectly suitable for most models of KitchenAid brand gas grills, such as 720-0709,....
- 【Aupoko service】Customer's satisfaction is our greatest pursuit. If you have any problems during the purchase or use, you can contact us at any....
Check Stock