Categories

Best Valve marine Valves

INNOVA 3612 Compression Tester - 4 Piece Kit

  • Designed to perform compression tests to help identify damaged pistons, worn rings, burnt valves, and blown head gaskets.
  • Works on conventional, electronic, and computerized domestic and import vehicles.
  • Features 2-1/2-inch dial face with Bourdon tube meter and dual-calibrated scales which read 0-300 P.S.I. and 0-2100 k.P.a..
  • Includes 15-inch rubber hose, side release valve and adapters (12mm, 14mm and 18mm).
  • Can also be used for motorcycle, ATV, snowmobile, and marine applications.
Check Stock

Five Oceans 1 inch Barbed Hose Base Mount Y-Valve FO-4124

  • MADE from Strong Nylon w/Three-way diverter bilge system.
  • A 3-HOLE base mount plate allows the Y-Valve to be easily mounted to a deck, floor or wall.
  • VALVES OPERATION: 120° degree movement. Ideal for sanitation applications.
  • Inlet/Outlet: 1 inch Barbed. Fitting: Bulkhead Mounting.
  • FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock

53021077 Lifters replacement For 4.7 Dodge/Chrysler Lash Adjusters HLA Replaces Part # 53021077 5073596AA (16 Packs)

  • VALVE LAP TOOL HELPS YOU SEAT VALVES ACCURATELY: Use the ABN Drill Valve Grinding Tool Attachment Valve Lapping Set to properly fit and seat valves into your vehicle engine.
  • Correct surface irregularities and remove sub-surface damage on your new valves with these motorcycle valve lapping tool small engine tools to fit perfectly into the valve guide for a secure fit.
  • For use with fine grinding paste (not included).
  • PERFECT VALVE LAPPING CUP SIZES FOR YOUR NEEDS: 4 attachable suction plates are included with this valve seat lapper tool kit to make fitting and seating various valve sizes in your lawnmower, chainsaw, car, or motorcycle.
  • Includes 20mm (3/4 inch), 30mm (1-3/16 inch), 35mm (1-3/8 inch) and 45mm (1-3/4 inch) synthetic rubber suction cups that are oil and UV resistant.
  • FITS YOUR TOOLS: Small engine valve lapping kit includes a 5 inch rubber roller attachment that has two 8mm (5/16 inch) steel shanks to fit your drill and the included suction cups.
  • Electric drill attachment provides increased control and productivity with less user fatigue while you put the finishing touches on your tune-up.
  • EASY TO USE: Clean all carbon deposits off valve and valve guide.
Check Stock

Hydraulic Adjustable Variable Flow Control Valve, 0-30 GPM, 3/4” NPT Port Size

  • SPECIFICATIONS: Chief’s front end loader control valve has 1 spool, 3 position spring-center with 4th position float detent, a 25 GPM flow rate, and 3000 PSI maximum working pressure. It has 1/2" NPT work, 3/4" NPT inlet/outlet port, and weighs 16 lb..
  • VERSATILE: The RLD Series 1 spool 4 way directional control valves can be used to forward, retract, or hold the position in double-acting hydraulic cylinders. Their versatility means these hydraulic valves can be used in most hydraulic circuits..
  • ROBUST: Our hydraulic control valve 1 spool has a precision machined construction and is extremely sturdy. Dynamic and high performing, the control valve operates easily at pressures as high as 3000 PSI and can be actuated in multiple ways..
  • ENERGY EFFICIENT: Equipped with a float detent, this hydraulic valve 1 spool, allows the hydraulic fluid to pass over the center of the valve to the other port. These valves are energy and effort efficient..
  • HIGH UTILITY: This loader valve control can effortlessly shift into three positions per requirement. Our hydraulic directional control valves offer enhanced directional control of actuators, even in cramped spaces, and prevent excess heat build-up..
Check Stock

Riseuvo Valve Stem Puller Installer Tool - 10pcs TR412 Tire Snap in Short Rubber Valve Stem, 4 Way Valve Core Remover, Single Head Tire Valve Core Remover Installer Tool

  • All Tool You Need - 1 pcs valve stem puller installer Tool, 10 Pcs TR412 valve stems with 20 pcs valve stem cores, 1 pcs single head valve core tool, 1 pcs double heads valve core remover tool, 1 pcs 4 way valve tool..
  • Valve Stem Puller - For installation or removal of snap in type tubeless tire valves.
  • Rubber Tire Valve Stem - These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
  • 4 Way Tool - Remove your valve core, re-tap threads and ream the inside of the valve (also works on A.C. unit valves).
  • Single or Double Head Tire Valve Core Remover - For quick removal or installation of tire valves. It is often necessary to wring out the valve core when aerated or deflate the tire, then you need the tire valve removal tool.
Check Stock

ATIE Neverlube Diverter Valve Kit 4720 Replacement for Jandy 2 Port or 3 Port Never Lube Diverter Valve 4720

  • Fits Jandy NeverLube 2 & 3 Port Valves and Jandy Gray 2 & 3 Port Valves.
  • Kit included: 1 Diverter Valve, 2 Shaft O-Rings, 1 Cap O-Ring, 1 Knob (black).
  • Aftermarket Replacement For Jandy 4720 Divert Valve Repair Kit.
  • Fit the Jandy Never lube & Standard Valves.
  • Does not fit Jandy large Diverter valve 4718, 4719.
Check Stock

Penn-Plax Cascade CCF5UL Canister Filter For Large Aquariums and Fish Tanks – Up To 200 Gallons Filters 350 GPH

  • CASCADE CANISTER FILTER FOR FRESHWATER OR MARINE ENVIRONMENTS: the Cascade 1500 (CCF5UL) has 5 media baskets, works at 350 GPH, and is recommended for....
  • STATE OF THE ART FEATURES OF THE CASCADE 1500: ♦ flow valves that rotate 360 degrees for easy maneuvering in even the tightest aquarium cabinets ♦....
  • USE ANY COMBINATION OF MEDIA: floss pad for removing particulate matter and a course sponge that provides abundant surface for promoting bacterial....
  • SEE BELOW FOR DIAGRAM, THE CASCADE 1500 INCLUDES: ♦ Flow rate control cut-off valves ♦ two independent directional 360 degree rotating valve taps....
  • FILTER MEDIA OPTIONS BY CASCADE AVAILABLE ON AMAZON, SOLD SEPARATELY: see below for details, sold separately is media such as: bio-floss, bio-sponge,....
Check Stock

ATIE Neverlube Diverter Valve Kit 4720 Replacement for Zodiac Jandy 2 Port or 3 Port Never Lube Diverter Valve 4720 (3 Pack)

  • Fits Jandy NeverLube 2 & 3 Port Valves and Jandy Gray 2 & 3 Port Valves.
  • Kit included: 3 Diverter Valve, 6 Shaft O-Rings, 3 Cap O-Ring, 3 Knob (black).
  • Replace Zodiac Jandy 4720 Divert Valve Repair Kit.
  • Fit the Jandy Never lube & Standard Valves.
  • Does not fit Jandy large Diverter valve 4718, 4719.
Check Stock

Moen U362CIS M-CORE 3-Series Mixing 3 or 6 Function Integrated Transfer Valve with CC/IPS Connections and Stops, or Unfinished

  • USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • FUNCTIONS: When using 2 showering devices, the valve has 2 independent and 1 shared functions.
  • When using 3 showering devices, the valve has 3 independent and 3 shared functions.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
  • VERSATILE DESIGN: M-CORE’S adaptability allows the valves to be roughed in with the option of functionality and style changes that don't require removing or changing the valve(s).
Check Stock

Swimables Valve Insert Replacement for All Jandy 2 Way and 3 Way Valves - Neverlube Diverter Valve Kit 4720 Replacement for Zodiac 2 Port or 3 Port

  • Perfect Fit: Fits all Jandy NeverLube 2 and 3 Port Valves and Jandy Gray 2 and 3 Port Valves. Perfectly fits Zodiac Never Lube Valves.
  • Installation: Make sure that the pump is turned off. Remove the 8 screws on top of the new valve and lift out the Diverter Valve Assembly..
  • Installation: Replace the Diverter Valve Assembly into the Valve and tighten it down with the 8 screws. Make sure the Valve Assembly is inserted the same way as it was with the "INLET" label positioned on the middle port where the water comes in. If you insert the Valve any other way, you run the risk of shutting off all water to this valve..
  • Kit Includes: This kit includes (1) diverter valve assembly, (2) Shaft Orings, (1) Cap Oring and (1) Valve Knob. Excellent Aftermarket Replacement.
  • 100% Satisfaction Guarenteed: Buy with confidence, as our premium quality diverter valve insert is built to last, and if you're not satisfied with it at any time within 30 days of purchase, we'll provide a refund or replacement..
Check Stock

Moen U362XS M-CORE 3-Series Mixing 3 or 6 Function Integrated Transfer Valve with Crimp Ring PEX Connections and Stops, or Unfinished

  • USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • FUNCTIONS: When using 2 showering devices, the valve has 2 independent and 1 shared functions.
  • When using 3 showering devices, the valve has 3 independent and 3 shared functions.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
  • VERSATILE DESIGN: M-CORE’S adaptability allows the valves to be roughed in with the option of functionality and style changes that don't require removing or changing the valve(s).
Check Stock

Moen U361CI M-CORE 3 or 6 Function Transfer Valve with CC/IPS Connections, or Unfinished

  • FOR USE WITH TWO OR THREE SHOWERING DEVICES: M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • IMPORTANT: When using 2 showering devices, the valve has 2 independent and 1 shared functions.
  • When using 3 showering devices, the valve has 3 independent and 3 shared functions.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple cartridge modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • VERSATILE DESIGN: M-CORE’S adaptability allows the valves to be roughed in with the option of functionality and style changes that don't require removing or changing the valve.
  • STREAMLINED INSTALLATION: Features an integrated mounting bracket that secures the valve directly to a brace, streamlining the installation process and saving time.
Check Stock