Best Variable Area Flowmeter
Adamas-Beta LZQ-4 Flowmeter Gas Oxygen Flow Meter Nitrogen Flowmeter 1-10LPM
- The gas flowmeter is made of high quality material, it is transparent and can hold up to 0.6MPa pressure..
- Beautiful look,low weight,unbreakable and long life..
- Used to measure single-phase non-pulsating gas flow,easy to use and lasting performance..
- Mainly used for detecting the oxygen, nitrogen flow, control gas flow and can be used in industry, flowmeter interface is connected by thread....
Check Stockuxcell A11120300ux0019 1/2 Inch Female Thread 0.2-2.0 GPM 1-7 LPM Water Liquid Inline Flowmeter LZM-15
- Material : Acrylic, Stainless Steel, Plastic.
- Overall Size : 32 x 210mm / 1.3" x 8.3" (D*H).
Check StockZistel CO2 Argon Regulator with Gas Hose TIG Welder
- Argon/CO2 Regulator For Welding: Zistel Argon Regulator is a ideal choice for professional TIG/MIG welding applications, which can be used to reduce and control pressure levels..
- Argon Flowmeter With Pressue Gauge: Our argon flowmeter is equipped with pressure gauge, allowing you to view how much gas is left in the tank range 0 to 3500psi..
- CGA580 Inlet Connection: Zistel pressure regulator is suitable for standard Argon /O2/N2 Tanks with CGA-580 Inlet Connection. You can connect the welding hose via female 5/8UNF-18RH fitting..
- Hose Included: Zistel 10Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects..
- Field of Application: Idea choice for welding, cutting ,chemical and electronics industry.
Check StockLuckyHigh Argon CO2 Mig Tig Flowmeter Gas Welding Weld Regulator Gauge 0-60CFH CGA580 Inlet
- Argon flowmeter can be used to reduce and control pressure levels, which is a ideal tool for MIG TIG welding, chemical and electronics industry..
- Inlet: CGA580, fit for argon and argon, CO2, and helium tanks..
- Outlet: female 9/16" x 18 nut and male 5/8" x 18 fitting. Pressure Range: 0-3500 PSI. 1/4" Hose barb adapter is included.
- The flowmeter body is made of full copper material. Fit for most kinds of welders, such as Miller, Lincoln, HTP, etc..
- Output flow adjustable from 10 to 60CFH (cubic feet per hour), which is indicated by a ball which moves up and down in the flow tube..
Check StockRX WELD Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld
- 1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
- 2.Accurate Gas Flow Gague:Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
- 3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
- 4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.It also comes with a standard 1/4" barbed fitting.
- 5.DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more precise gas metering..
Check Stock26FV Series - 200 Amp - Air Cooled - Flexible Head TIG Torch with Valve - 12.5 feet 2-Piece Cable - Dinse 35-70 Connector
- 200 Amp fully assembled 26V Series TIG Torch, designed for welders with Dinse or Stud Connectors or with separate TIG Module or TIG Box..
- Choose between 5/16" Terminal, LC-40 cable connectors or Dinse Style Connectors, (Please check Picture #2 for dimensions and characteristics).
- Available with 12.5 or 25 feet Cable and Straight or Flexible Head. Torch head with valve for a manual closure of argon flow..
- 2 Pieces, gas hose is separate from power cable for independent connection with welder gas outlet or directly to the argon flowmeter..
- Accessory Kit and Heavy-Duty Nylon Cable Cover are Included. Other accessories might be needed to connect the argon line to your welder or flowmeter.....
Check StockG3/4\ Thread Hall Effect Liquid Water Flow Sensor Switch, DN20mm Counter Meter Used for Water Heaters, Water Dispenser, Water Purifier, Coffee Maker 2-45L/Min
- Measurement Range: According to strict regulations, the measurement range of the flow switch is 60 (cubic meters/hour), which is large enough to meet daily needs..
- Durable: The water flow sensor switch is made of high-quality brass material, which is durable and has a long service life..
- Quality Assurance: This flowmeter has undergone strict quality control and testing, and the quality is guaranteed. Safe and reliable..
- Practical: High-quality water flow meters can maintain high performance for a long time, and are convenient to use in real life and have strong practicability..
- Wide Application: The flowmeter can be widely used in industrial automation, mechanical equipment, air compression industry, refrigeration, heating and ventilation and other fields..
Check StockCNYST Ultrasonic Flow Meter Liquid Flowmeter TUF-2000H with 3 Size Transducer for Pipe Diameter DN25 to 6000mm LCD Display Max Liquid Temperature 90 Degrees Celsius
- ◆ TUF-2000H hand-held ultrasonic flowmeter using external clamp type sensor measuring liquid flow. Installation process is very simple, more easy to operate. Especially suitable for flow balance test and flow monitoring..
- ◆ High Accuracy measuring: Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%.
- ◆ Non-intrusive measuring: Non-intrusive, clamp-on transducer, no pressure drop, no pipe disturbance.
- with 3 size Sensor TS-2/ TM-1/ TL-1 Range: DN25~6000mm.
- ◆ Large LCD display: Display: 4 line x 16 character LCD with backlight.
- Display instantaneous flow, accumulated flow (positive, negative and net), velocity, working status etc..
- ◆ Principle: transit-time ultrasonic flowmeter.
- Built-in data logger: Built-in 24K data logger, store over 2000 lines measuring data.
Check StockVTSYIQI Handheld Ultrasonic Flow Meter Flowmeters HS-HM for DN15mm to DN300mm Pipe Size for Liquids Temperature Range -30℃ to 90℃ with Clamp On Sensors Transducers LCD Display
- with Standard small bracket size: 318*59*85mm.
- ◆High Accuracy measuring: Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%.
- ◆Principle: transit-time ultrasonic flowmeter.
- Built-in data logger: Built-in 24K data logger, store over 2000 lines measuring data.
- ◆Large LCD display: Display: 4 line x 16 character LCD with backlight.
- Display instantaneous flow, accumulated flow (positive, negative and net), velocity, working status etc..
- ◆ TUF-2000H hand-held ultrasonic flowmeter using external clamp type sensor measuring liquid flow. Installation process is very simple, more easy to operate. Especially suitable for flow balance test and flow monitoring..
Check StockArgon Regulator Dual Co2 Flowmeter by Manatee for TIG MIG Welder Gas and backpurge 60 SFCH - CGA 580 inlet connection and 5/8 x 18RH outlet fitting - Accurate Gas Metering Delivery System
- ✔ WHETHER YOU ARE a welding beginner or a seasoned professional, you will surely enjoy using the Argon Regulator Dual Flowmeter! Perfect for hooking....
- ✔ COMPATIBLE with a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG TIG Welding Argon....
- ✔ DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more....
- ✔ HAS CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 60 CFH and has....
- ✔ Welders around the nation agree that the Argon Flow Meter Regulator is key to accurate gas meter readings..
Check StockDEWALT Metal Shear, Swivel Head, 18GA (DW890) , Yellow
- The metal shear has powerful, 5 amp, all ball bearing motor for long life.
- The electric metal shear head swivels 360 degree for cutting convenience.
- The electric metal shear cuts 7/32-inch strip, which continuously curls out of cutting area for clear line of sight.
- Variable speed dial allows user to vary speed for specific materials and various applications (100-350 spm).
- Powerful, 5.0 Amp, all ball-bearing motor for long life.
- Head swivels 360 degree for cutting convenience.
- Cuts 7/32-inch strip which continuously curls out of cutting area for clear line of sight.
Check StockHighFree Argon Regulator TIG Welder MIG Welding CO2 Flowmeter 10 to 60 CFH - 0 to 4000 psi Pressure Gauge CGA580 Inlet Connection Gas Welder Welding Regulator
- ▶Flowmeter which is perfect for Mig and Tig Welding. Flow Meters,it fit argon ,co2 and argon/co2 fixed. Inlet connection:CGA580..
- ▶ Compatiblewith a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG/TIG Welding Argon Regulator really is a must-have for any welder..
- ▶For convenience, the regulator is equipped with a high pressure weld gauge that allows you to view how much gas is left in the tank, while the ergonomic flow meter can be adjusted for different uses. Applicable for many kinds of gases, such as CO2, argon, etc..
- ▶ It can screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 50 CFH and has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI, so you know how much is left in your tank..
- ▶ Package include: A Flowmeter with 6.5 foot Hose. Applicable for many kinds of gases, such as CO2, argon, etc..
Check StockOrbit 58023N Lawn Sprinkler Neutral
- SMALL AREA COVERAGE: These sprinklers cover an area up to 30 ft. diameter..
- EVEN COVERAGE: Evenly distributes water over your spray area..
- GENTLE WATERING: Rain-like spray, ideal for spot watering lawns and garden areas..
- DURABLE CONSTRUCTION: Quality zinc construction ensuring it will last season after season..
- VARIABLE WORKING PRESSURE: Works with both low- and high-pressure water systems..
Check Stock