Categories

Best Variable Helix Tap And Drill

CS Unitec 3/4' Weldon Tap Holder for 1/4' Diameter Taps - Mag Drill Tap Collet - Fits Standard Weldon Chucks On Most Magnetic Drill Presses (TCM 1/4)

  • FAST TAPPING: Adapter for 1/4" diameter taps, fast changeout. Tap chuck collets available for holding up to 3/4" diameter taps..
  • NO SPECIAL TOOLING NEEDED: Collets fit standard tap shanks. Can be used with variable speed, reversible and other mag drills..
  • 3/4" WELDON SHANK: Fits most mag drill chucks. Industry standard, 2 flat shank..
  • COMPACT: For easy transport, storage and use without impact on magnetic drill stroke..
  • HEAVY DUTY: High quality, long lasting, professional grade, Made In Germany. Recommended use with MAB 465 magnetic drill (ASIN B08QGSPFDD).
Check Stock

CS Unitec 3/4' Weldon Tap Holder for 3/4' Diameter Taps - Mag Drill Tap Collet - Fits Standard Weldon Chucks On Most Magnetic Drill Presses (TCM 3/4)

  • FAST TAPPING: Adapter for 3/4" diameter taps, fast changeout. Tap chuck collets available for holding up to 3/4" diameter taps..
  • NO SPECIAL TOOLING NEEDED: Collets fit standard tap shanks. Can be used with variable speed, reversible and other mag drills..
  • 3/4" WELDON SHANK: Fits most mag drill chucks. Industry standard, 2 flat shank..
  • COMPACT: For easy transport, storage and use without impact on magnetic drill stroke..
  • HEAVY DUTY: High quality, long lasting, professional grade, Made In Germany. Recommended use with MAB 465 magnetic drill (ASIN B08QGSPFDD).
Check Stock

DEWALT SDS Plus Bits, Rock Carbide Tip, Hammer, 5/8-Inch (DW5446)

  • Strong core: SDS max bits have tapered core for bit strength and maximum durability, especially when drilling deep holes.
  • Aggressive material removal: Two stage flute design with variable helix pattern of DEWALT SDS hammer drill bits allows for efficient debris removal.
  • Clean, round holes: Two sharp cutting edges for true holes.
  • Wear mark indicator: For accurate diameter of holes.
Check Stock

DEWALT SDS Plus Bits Set Rock Carbide Tip 5-Piece DW5470

  • Strong core: SDS max bits have tapered core for bit strength and maximum durability, especially when drilling deep holes.
  • Aggressive material removal: Two stage flute design with variable helix pattern of DEWALT SDS hammer drill bits allows for efficient debris removal.
  • Clean, round holes: Two sharp cutting edges for true holes.
  • Wear mark indicator: For accurate diameter of holes.
  • ROCK CARBIDE tip maximizes carbide surface contact for longer bit life..
Check Stock

DEWALT SDS+ Hammer Bit Rock Carbide 1-1/8-Inch x 8-Inch x 10-Inch DW5468

  • Strong core: SDS max bits have tapered core for bit strength and maximum durability, especially when drilling deep holes.
  • Aggressive material removal: Two stage flute design with variable helix pattern of DEWALT SDS hammer drill bits allows for efficient debris removal.
  • Clean, round holes: Two sharp cutting edges for true holes.
  • Wear mark indicator: For accurate diameter of holes.
Check Stock

6 Packs Titanium Combination Drill & Taps Bit Set SAE 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc.

  • COMBINATION DRILL & TAP & COUNTERSINK- No more using a drill to drill the hole and then tapping it out later with another tool. All in one and works great and save a lot of time and trouble..
  • HANDY TOOLS – These drill tap bits are must have if you fabricate a lot.
  • you can use the in aluminum, plastic, and so on.
  • Go slow, once the tap is doing its thing, make sure not to strip the threads by bottoming it out..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using th....
Check Stock

TEMO 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit

  • 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit.
  • Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation..
  • Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling..
  • One piece construction guarantees proper drill for tap size. | 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap..
  • US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check Stock

Irwin Tools Tap and Drill Sets, 13-Pieces

  • This tap and drill bit set produces a thread that is strong and easy to tap.
  • High-carbon steel plug taps are great for general-purpose threading.
  • 135° split-point drill bits give fast, precise drilling.
  • Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
Check Stock

szgate 5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS MetricImperial Plug Drill Bits Hand Tools 6-32NC, 6-32NC (3.5mm)

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

6 Pcs HSS Drill Tap Bit Set, Titanium Coated Combination Drill & Taps M3, M4, M5, M6, M8, M10, 1/4\ Hex Shank, for tapping, drill a hole and cut new threads

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

H.S.S. Tap & Drill Full Bundle, UNC, UNF and Metric

  • 3 H.S.S. Tap & Drill Full Bundle for almost all cases..
  • 18 Pc H.S.S. Tap and Drill Set, Unf in Metal Box, 0001-0050.
  • 18 Pc Hss Tap and Drill Set, Metric, 0001-0052.
  • 18 Pc H.S.S. Tap and Drill Set, U.N.C, 0001-0040.
Check Stock

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

  • COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
  • No more using a drill to drill the hole and then tapping it out later with another tool..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
  • you can use them in aluminum, plastic, wood and other thin soft material metal panel.
  • When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock