Categories

Best Variable Torque

Wood Drill Press Bores One Hole at Fast Speed

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.
Check Stock

Essential Rob Halford

  • ...rovides precise control of drilling to prevent screws from sinking too deep, falling off screw heads or even breaking screw shafts..
  • ✅ [20 Voltage & 266 In-lbs Max Torque] - This 20V high voltage cordless drill driver will provide up to 266 In-lbs (30N.m Max) torque rotation strength to overcome resistance..
  • ✅ [2 Variable Speeds] - Featuring a 2-variable-speed switch (0-350 and 0-1350 RPM), combined with an adjustable clutch gives you the versatility to drill different materials and use a variety of bits. Low speed for screwing and high speed for drilling..
  • ✅ [Household Hand Tools & 14” Pink Storage Bag] - The home tool set comes with many hand tools including slip joint pliers, groove joint pliers, adjustable wrench, long nose pliers, magnetic screwdriver holder, screwdriver bits, utility knife, tape measure, etc. The 14" Pink women's tool bag is great for home improvement and DIY projects..
  • ✅ [3/8” Keyless Chuck] - The 3/8" keyless chuck allows the cordless drill to use a variety of bits for common tasks around the house. With the Forward/Reverse switch you can install/remove the bits by hand tightening or loosening the chuck..
Check Stock

Makita GA4542C SJSII High Power Angle Grinder, 4-1/2'

  • Powerful 12.0 AMP motor delivers more output and variable (2,800 - 11,000) RPM.
  • SJSII provides a leaf spring and cam gear drive mechanism that is engineered to reduce vibration.
  • SJSII provides a mechanical gear drive to help prevent motor and gear damage by dampening the force on the gear when the wheel is forced to stop.
  • Variable speed control dial enables user to match the speed to the application.
  • Electronic Controller is a three-part electronic feature designed to provide the required power in high torque applications for increased tool life.
Check Stock

Makita XT704 18V LXT Lithium-Ion Cordless 7-PC Combo Kit 3.0Ah

  • Variable 2-speed 1/2" hammer Driver-Drill (0-600 & 0-1, 900 RPM) with Makita-built 4-pole motor delivers 480 in.Lbs. Of max torque.
  • Variable speed impact driver (0-2, 900 RPM & 0-3, 500 IPM) provides 1, 460 in.Lbs. Of max torque for a wide range of fastening applications.
  • 6-1/2" circular saw delivers 3, 700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs. With battery.
  • Recipro saw provides 0-2, 800 SPM and features "tool less" blade change.
  • 4-1/2" cut-off/ angle grinder delivers 8, 500 RPM.
  • features automatic speed change technology that adjusts speed and torque during operation for....
Check Stock

Makita 9565PCV SJS High Power Paddle Switch Angle Grinder, 5'

  • Variable 2-speed 1/2" hammer Driver-Drill (0-600 & 0-1,900 RPM) with Makita-built 4-pole motor delivers 480 inches Lbs of max torque.
  • Variable speed impact driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 inches Lbs of max torque for a wide range of fastening applications.
  • 6-1/2" circular saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs.
  • Recipro saw provides 0-2,800 SPM and features "tool less" blade change.
  • 4-1/2" cut-off/ angle grinder delivers 8,500 RPM.
  • features automatic speed change technology that adjusts speed and torque during operation for optimum performance.
  • Includes - (2) 18V LXT Lithium-Ion batteries, rapid charger, XPH10Z, XDT11Z, XSS02Z, XRJ04Z, XAG03Z, DML185 and bag.
Check Stock

Makita XT267T 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 5.0Ah ,

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL motor delivers 1,090 in.Lbs. Of max torque.
  • Variable speed impact driver (0-3,400 RPM & 0-3,600 IPM) with BL motor delivers 1,500 in.Lbs. Of max torque.
Check Stock

Makita CT411 12V max CXT® Lithium-Ion Cordless 4-Pc. Combo Kit (1.5Ah

  • 3/8" Driver-drill with 2-speeds (0-450 & 0-1, 700 RPM) delivers up to 250 in.Lbs. Of max torque.
  • 3/8" Driver-drill features a compact design at only 7" Long and weighs only 2.4 lbs. With battery for reduced operator fatigue.
  • 1/4" Impact driver with variable speed (0-2, 600 RPM & 0-3, 500 IPM) delivers up to 970 in.Lbs. Of max torque.
  • Impact driver features a compact design at only 6-1/8" Long and weighs only 2.3 lbs. With battery for reduced operator fatigue.
  • Variable speed 3/8" Impact wrench (0-2, 600 RPM & 0-3, 200 IPM) provides 103 ft. Lbs. Of max torque in an ultra compact design.
Check Stock

Makita XT269T 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 5.0Ah

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" Hammer Driver-Drill (0-500 & 0-2, 000 RPM) with BL Brushless motor delivers 530 in pounds. Of max torque.
  • Variable speed impact driver (0-3, 400 RPM & 0-3, 600 IPM) with BL Brushless motor delivers 1, 500 pounds of max torque.
Check Stock

Makita XT706 3.0Ah 18V LXT Lithium-Ion Cordless Combo Kit (7 Piece)

  • Variable 2-speed 1/2″ hammer Driver-Drill (0-600 & 0-1, 900 RPM) with Makita-built 4-pole motor delivers 480 in.Lbs. Of max torque.
  • Variable speed impact driver (0-2, 900 RPM & 0-3, 500 IPM) provides 1, 460 in.Lbs. Of max torque for a wide range of fastening applications.
  • 6-1/2″ circular saw delivers 3, 700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs. With battery.
  • Recipro saw provides 0-2, 800 SPM and features “tool less” blade change.
  • 4-1/2″/ 5″ cut-off/ angle grinder delivers 8, 500 RPM.
  • features automatic speed change technology that adjusts speed and torque during operation for optimum performance.
Check Stock

Drill, Press - Wood Drill Press: Bore One Hole, Fast Speed, Construction Drills - Electric

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.
Check Stock

Makita XT269M 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 4.0Ah Blue

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" Hammer Driver-Drill (0-500 and 0-2,000 RPM) with BL Brushless Motor delivers 530 in.lbs. of Max Torque.
  • Variable speed Impact Driver (0-3,400 RPM and 0-3,600 IPM) with BL Brushless Motor delivers 1,500 in.lbs. of Max Torque.
Check Stock

Makita XT1501 18V LXT® Lithium-Ion Cordless 15-Pc. Combo Kit (3.0Ah)

  • Variable 2-speed 1/2" hammer Driver-Drill (0-600 & 0-1,900 RPM) with Makita-built 4-pole motor delivers 480 inches Lbs of max torque.
  • Variable speed impact driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 inches Lbs of max torque for a wide range of fastening applications.
  • 6-1/2" circular saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs.
  • Recipro saw provides 0-2,800 SPM and features "tool less" blade change.
  • 4-1/2" cut-off/ angle grinder delivers 8,500 RPM.
  • features automatic speed change technology that adjusts speed and torque during operation for optimum performance.
  • Includes - (2) 18V LXT Lithium-Ion batteries, rapid charger, XPH10Z, XDT11Z, XSS02Z, XRJ04Z, XAG03Z, DML185 and bag.
Check Stock

ACDelco ARI20174-PM P20 Series 20V Cordless Li-ion 1/2” 369 ft-lbs. Heavy Duty Brushless Impact Wrench Tool Kit

  • ...ontrol that delivers precise torque level (73 / 221 / 369 ft-lbs.) of max tightening torque and 1,500 / 1,800 / 2,100 RPM (No Load Speed)..
  • PRECISE TORQUE & AUTO-SHUTOFF - 3-Stage Electronic Torque Control (ETC) that delivers precise torque level (73 / 221 / 369 ft-lbs.). Auto-shutoff features for 1st and 2nd Stage..
  • VARIABLE SPEED CONTROL – Equipped with a responsive variable speed trigger (0 to 2,100 RPM) and an electric brake switch for optimized applications. Slim body design molded to securely fit for maximum control and steadiness..
  • VALUE KIT – Our P20 Impact Wrench Tool Kit comes with a cordless impact wrench, an interchangeable 20V Li-ion battery, and a fast charger..
  • 100% SATISFACTION GUARANTEED – For over 35 years we have been manufacturing and providing stellar products and services to our customers at the best value possible. We are confident that you will absolutely love our impact wrench tool kit that we will stand behind our product with a replacement or your money back! Every purchase comes with a manufacturer’s limited 1-year warranty, so you can buy with confidence!.
Check Stock