MaySpare 12V 140Amp Voltage Sensitive Relay VSR Double Battery Automatic Charging Relay Dual Smart Battery Isolator
- 12V, 140A, 13.3V cut-in voltage, 12.8V cut-out voltage,.
- Package Include All the Bits and Pieces Needed for a Complete Installation.
- Working Voltage: Having Voltage Sensitive Chip,Rely Cuts in at 13.3 Volts and Cuts out at 12.8 Volts to Ensuring Primary Battery is Always Ready for Vehicle to Run..
- Fuction:Like Having Two Separate Power Sources,The Dual Battery Isolator Kit Enables Your Accessories to Run From a Separate Battery While the engine is not running on your vehicle While keeping your Main Battery Charged and Your Vehicle Always Ready to Go and Start When You Want It..
- Compatibility: This battery isolators are small and suitable for almost anywhere, for ATV, UTV, Boats, RV's，marine vehicle, truck, caravan.
- LIFETIME WARRANTY :100% High Quality and Enjoy Full Life Warranty, Free Exchange.
Check Stock
KINGBOLEN BM550 6V 12V 24V Car Battery Tester 100-2000 CCA Voltage Tester 2Ah-220Ah Internal Resistance Tester Accurate Digital Auto Battery Analyzer for Cars Trucks SUV ATV Boats Motorcycles Vehicle
- ...t state of your car battery and avoid accidents..
- 【Simple Operation & Accurate Data】The results of the battery test are based on the CCA standard, which can be quickly and accurately displayed on the 1.8-inch HD screen, allowing you to quickly know the status of the battery.You can test the batteries both in-vehicle and out-of-vehicle, which is very convenient..
- 【Safe design & Safe Use】The battery tester adopts Reverse Connection Protection. If you accidentally reverse the two wires, don't worry, the battery tester will not work at this time to prevent the internal circuit from burning, which can well protect the equipment and the long-term use of the car battery.(If the clip is not properly clamped,the screen will flicker).
- 【Plug and Play】It is simple to use, just connect the clip of the battery tester to the car battery correctly and it can start working, whether the battery is in vehicle or out of vehicle, or a dead battery can be tested.Simple and effective tool designed for DIY enthusiasts, car factories, garages, car battery manufacturers and more.Start your test now!.
Check Stock
Firstech Compustar Drone Mobile X1MAX-LTE Telematics GPS Alarm Module Tilt Drone X1-MAX
- ...| LTE + GPS + Backup Battery Add-On | Model: X1MAX-LTE DroneMobile smartphone control and GPS tracking to a compatible remote start and security system. Built-in backup battery for added security. Powered by AT&T LTE for industry-leading coverage and reliability..
- Your Vehicle, Protected | The Drone X1-MAX not only adds unlimited range smartphone control and GPS tracking to your vehicle, but it also protects your vehicle's security and health. The X1-MAX Module has a built-in backup battery and security sensors to detect intrusion or battery tampering..
- What's in the Box? X1MAX-LTE Module - AT&T LTE Module w/ Built-in Backup Battery Data Harness - Connects to Aftermarket Remote Start/Security System 30-Day Premium Trial - Smartphone Control + GPS Tracking + Alarm Alerts + much more! OBD Harness - Hardwire CAN High and CAN Low.
- Features : Smartphone Control - Enables remote start, keyless entry & more from virtually anywhere! Unlimited Range - Control & track your car from anywhere over LTE with 3G fallback. Built-in Backup Battery - On-board lithium-ion battery that triggers alert when main battery....
Check StockPower Wheels 12-Volt Rechargeable Battery
- Keep young drivers zooming with this extra 12-V battery, compatible with any Power Wheels vehicle that requires a 12-V, 12-Ah battery.
- Battery charger not included. Please use the charger that was included with your Power Wheels vehicle to charge this battery.
- Prevent premature battery failure! Fully charge battery before storage and at least once per month.
- Before first time use, you must charge the battery at least 18 hours (but no more than 30 hours). Always recharge for at least 14 hours (but no more....
Check StockPower Wheels 12-Volt Rechargeable Battery
- For use with a Power Wheels vehicle that requires a 12V, 9.5 Ah lead acid battery.
- Battery charger not included. Please use the charger that was included with your Power Wheels vehicle to charge the battery.
- Prevent premature battery failure! Fully charge battery before storage..
- Before first time use, you must charge the battery at least 18 hours (but no more than 30 hours). Always recharge for at least 14 hours (but no more than 30 hours)..
Check Stock
Taylor Cable 48020 Single Trunk Mount Battery Relocator Kit
- ...ds, connectors, screws, zip ties, and more..
- Voltage Sensitive Relay: DEWINNER Automatic 140 Amp Dual Battery Isolator is all you need to charge Two Battery Systems. Voltage Sensitive Relay (VSR) cuts in at 13.3 volts and cuts out at 12.8 volts to ensure your primary battery is always charged and ready to start your vehicle. It's like having two separate power sources for each battery while only having one alternator!.
- Fits a Wide Variety of Vehicles: Like Having Two Separate Power Sources,The Dual Battery Isolator Kit Enables Your Accessories to Run From a Separate Battery While the engine is not running on your vehicle While keeping your Main Battery Charged and Your Vehicle Always Ready to Go and Start When You Want It. Suitable for 12V 4WD, marine, truck, caravan & camping applications.
- What You Get: 140 Amp Voltage Display Battery Isolator.
- 2×positive brass marine battery terminals.
- 1× negative brass marine battery terminal.
- 3×copper crimp lugs &2× Red heat shrink.
- easy-to-follow instructions for the novice DIYer. Power wire in, power wire out. Easy..
- Buy With Confidence: Every 140 Amp Dual Battery Isolator is backed by an industr....
Check Stock
OLLGEN 3M/10ft OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Socket Extension Cable
- Cigarette Lighter with Alligator to OBD2 16 Pin Male Connector Power Cable :Powered by any jump starter with a 12V outlet into an OBD II Memory Saver.Plug it into the OBD Male connector of the vehicle, plugging the cigarette connector into the clip cords, hooking it up to a 12V battery source.Note:This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet..
- Super Long 10ft (3meters) Cable: plenty long until you try connecting it to another car's battery or cigarette lighter. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand..
- 8 amp fuse built into the memory saver, better reliable on overload protection. Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Interface connector between a 12V DC power source and vehicle's OBD II port. Preserves vehicle codes and electronic presets. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one..
- Work no problem as all ODBII ports :It works on any vehicle with OBDII which is 1996 and later (You will be plugging one end into it). It is not needed or required t....
Check StockPower Wheels 6-Volt Rechargeable Replacement Battery
- For use with a Power Wheels vehicle that requires a 6V, 9.5 Ah leadacid battery..
- This product does not include a charger. Please use the charger that wasincluded with your Power Wheels vehicle to charge the battery..
- Before first time use, you must charge the battery at least 18 hours(but no more than 30 hours)..
- Always recharge for at least 14 hours (but no more than 30 hours)..
- IMPORTANT: Prevent premature battery failure! Fully charge battery before storage..
Check Stock
Spytec GPS Mini USB Hardwire kit for GPS Tracker with Fuse Holder for Continuous Vehicle Tracking
- Uninterrupted Power Supply: Mini USB hardwire kit connects the GPS Tracker directly to motorcycles. cars, trucks, buses, SUVs, or big rigs for continuous power, accepts voltage from any type of vehicles run on 10-36V..
- Easy Installation: Hardwire Kit for the STI_GL300 easily installs under the hood in any modern vehicle. Just attach the black and red wires to the two-wire hookup on the battery and connect the hardwire kit to your STI_GL300. The installation should only take about 10 minutes or less..
- Smart Voltage Protection: The high endurance car power adapter for the Mini USB direct wire keeps the tracker safe by producing steady DC 5.0V/1500mA electricity to your mini GPS. It also charges the internal battery of the GPS tracker to ensure it never stops tracking in the event when it cannot draw power from the vehicle battery..
- Compatibility: The Mini USB Hardwire Kit is developed for GL300. However, it is compatible with GL200, GL300, GL300W, and GL300VC GPS Models. With 5.7 feet wire length, it allows you to connect directly to the vehicle battery and hide the GPS tracker inside your vehicle freeing up the cigarette lighter for other devices..
- Car Warranty Compliance: You don't have to worry about permanently altering your vehicle in any way. The Har....
Check Stock
Battery Monitor BM2 for Car RV 12V-20V Battery/Antigravity Batteries with Bluetooth 4.0 Wireless Battery Sense Tester Battery Load Tester Compatible with iPhone Apple Android Phone Free App
- 【Easy to Install】Make car battery tester connect with battery directly. It provides a quick reading to determine if a vehicle battery needs a jump or replacing and also the alternator output status. Various Colored LED indicate the battery or the alternator status. The power consumption of the product is only 1.5 mAh, which has little effect on the car battery. The power consumption for one year is about 13.14A..
- 【Automatic Reminder Function 】Battery tester 12v’s app will send the battery status to the phone notification bar when enter Bluetooth range..
- 【Easy to Operate】Battery Monitor’s App is Battery Monitor BM2. Please scan machine backup or user manual scan code to download software. Connecting bluetooth and open app, no code, you can know battery or battery load’s Condition and check charging and starting system, list time of each driving..
- 【Safe and Reliable】-- Battery load tester tells you everything about the battery: voltage, charge,cranking power, Engine starting detect automatically, etc..
- 【Compatibility】Battery Monitor is perfect for car battery tester and RV Battery Monitor,every day vehicle.Compatible with all 12-volt vehicle batteries.
- Voltage: 9-16V, Connect with battery directly, NO CODE, free app for iOS & Andr....
Check StockHopkins 20099 Engager LED Test Break Away System with Battery Meter
- Activates trailer brakes upon separation from tow vehicle.
- Built-in battery meter with LED test lights.
- LEDs indicate when battery is fully charged, when it needs to be re-charged, or while it is charging.
- Features built-in battery charger that charges battery while it’s plugged into the vehicle.
- Complete system includes box, battery, charger, 7" switch, and hardware.
Check StockPower Wheels Toddler 6-Volt Rechargeable Replacement Battery
- For use with a Power Wheels Toddler vehicle that requires a 6V, 4.0 Ah lead acid battery.
- This product does not include a charger. Please use the charger that was included with your Power Wheels vehicle to charge the battery..
- Before first time use, you must charge the battery at least 18 hours (but no more than 30 hours)..
- Always recharge for at least 14 hours (but no more than 30 hours)..
- IMPORTANT: Prevent premature battery failure! Fully charge battery before storage..
Check StockTPF Booster Jumper Cables Automotive Replacement Battery Jumper Cables Alligator Clamp Booster Battery Clips for 12V Portable Car Jump Starter (Normal)
- Jumper cable for 12V Portable charger, Built-in 200Amp Fuse Protection.
- Wire: 10 AWG silicone 0.08/1050 O.D. 5.0 Red Black.
- EC5 Male plastic shell blue, fits 5mm Banana plug..
- Replacement jump box cables, fits most brands of mini portable jump boxes, mobile chargers.
- Use of car jump starter: 1)- connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative (-) pole, 2)- Plug the cord of jumper cable into the jumper starter's socket, 3) - and start the vehicle.
- Cautions: Do not reverse the operation sequence of jump starter.
- Do not use jump starter to start vehicle if the number of battery indicators are less then 3 to protect the jump starter from damage.
- Do remove the product from vehicle within 30 seconds after vehicle is started, or it may cause security incidents..
Check Stock
