Categories

Best Vehicle Servicing

Sealey MR1 3tonne per Pair Lifting Car Ramps with Adjustable Width

  • Compact, convenient and innovative 3tonne (pair) rated car ramps (maximum single axle weight of 1800kg), supplied with four stands and removable lifting beam, capable of raising a vehicle completely off the ground giving a clear workspace between vehicle and floor..
  • Excellent for general servicing, exhaust work repairing damaged jacking points, sills, floor panels and undersealing..
  • Will fit within confined areas such as garages and workshops..
  • Safe and efficient operation, gives a clear workspace between the raised vehicle and floor..
  • Requires a jack with a saddle height no taller than 100mm and max jacking height of 435mm to lift its jacking beam to a position where its stands can be inserted..
  • Designed so the track width can be adjusted to fit various makes and model of cars with maximum tyre tread width of 380mm..
Check Stock

Mopar Five Liters of Synthetic Automatic Transmission Fluid ATF +4 New OEM

  • 2 x Genuine Automatic Transmission Fluid ATF+4 10L 68218058AC MS-9602.
  • Install according the instructions of the vehicle manufacturer.
  • To maintain driving safety and durability of assembled service kit, servicing should be conducted at specialized service unit..
Check Stock

Mevotech TTX Suspension Ball Joint

  • MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings..
  • QUICK AND EASY INSTALLATION: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided..
  • SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree & 90 Degree SAE grease fitting included..
  • LARGER SPHERE DESIGN: Optimize performance with application-specific ball stud system with larger sphere..
  • A STRONGER BOND: Keep fasteners secure and vibration resistant with pre-applied Nylok thread adhesive..
Check Stock

Robinair 16009 134R DiscovR Refrigerant Identifier

  • Best defense against unknown refrigerant and the risks associated with unknown refrigerant is a refrigerant identifier.
  • Contaminated refrigerant can wreak havoc on any R134a recovery recycle and recharge machine.
  • Protect your A/C service equipment and know whether or not you have acceptable R134a refrigerant before servicing the vehicle.
  • DiscovR refrigerant identifier notifies you when the system contains excessive air.
  • Pass and fail lights clearly show if refrigerant is pure enough to be recovered.
Check Stock

Mevotech TTX Suspension Ball Joint

  • MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings..
  • QUICK AND EASY INSTALLATION: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided..
  • SUPERIOR SEAL: Lock out moisture and contaminants with Integri-Boot design built into the ball joint assembly..
  • SIMPLE TO SERVICE: Make servicing a snap with the 90 Degree SAE grease fitting included..
  • ACCURATE FIT: Easily and accurately press fit the ball joint into the larger flange diameter..
Check Stock

Robinair 34988NI Premium Refrigerant Recover Recycle Recharge Machine for Automotive A/C Systems

  • Robinair's 34988NI combines ease of use and superior accuracy to recover, recycle, evacuate, leak test and recharge R-134a vehicle air conditioning....
  • Full automatic function will recover, vacuum, leak test, and charge on its own without the need to stand and monitor the machine.
  • Patented automatic refrigerant refill feature maintains a user-selectable amount of refrigerant in the internal vessel and signals when it’s time to....
  • Automatically adds oil if necessary using load cells that measure the amount of oil removed from the system and automatically puts the right amount....
  • Includes: 2 separate oil inject bottles for servicing different vehicle systems, UV dye injection capability for leak detection, large, easy-to-read....
Check Stock

Mevotech Supreme Tie Rod End MS76604

  • SINTERED METAL STRENGTH: Increase durability and extend service life with sintered metal technology..
  • QUICK AND EASY INSTALLATION: Simply secure ball joint to the vehicle with part specific castle nut & cotter pin provided..
  • SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree SAE grease fitting included..
  • LARGER SPHERE DESIGN: Optimize performance with application-specific ball stud system with larger sphere..
  • RIGOROUS TESTING: Extensive in-house and third-party durability testing ensures ultimate performance and strength..
Check Stock

ABN Exhaust Hanger Removal Pliers – 11In Rubber Exhaust Hanger Removal Tool Grommet Puller Muffler Rubber Hanger Plier

  • SERVICE YOUR EXHAUST SYSTEM: Use the ABN Rubber Hanger Pliers Exhaust Hanger Puller Removal Tool to remove the hanging bracket from the rubber hanger when servicing your vehicle exhaust system.
  • Spring-loaded muffler hanger tool pliers uses optimal leverage to separate parts for easy servicing and to protect your parts from damage.
  • OPTIMAL LEVERAGE FOR EASY USE: 25-degree offset handle and 2-inch (5.1cm) faceplate allows for a comfortable hold and optimal leverage when working in tight and hard to reach areas.
  • Compatible with most import and domestic vehicles that use exhaust hanger supports.
  • EASY TO USE: Place the faceplate against the rubber hanger around the metal bracket.
  • Align the 3/8 x 7/8 inch (.9 x 2.2cm) extension knob against the metal bracket then compress the muffler hanger pliers to push the bracket through the rubber hanger.
  • BUILT TO LAST: High carbon steel exhaust hanger pliers provide maximum strength, durability, and leverage.
  • Plier faceplate features .8 inch (2.1cm) opening to fit around your metal hanger brackets and against your rubber hanger grommet.
  • COMFORTABLE GRIP: 11-inch (27.9cm) long muffler hanger removal tool rubber hanger pliers feature 4-inch (10.2cm) rubber-dipped grip handles that provide comfort and a secure hold while yo....
Check Stock

MOOG 369 U-joint

  • BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles.
  • STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability.
  • KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants.
  • GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution.
  • INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear.
Check Stock

Dorman 81057 Pinion Crush Sleeves Compatible with Select Models

  • Direct replacement - this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
  • Required replacement - when servicing the differential.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

OMT Vacuum Pump, 1 Stage HVAC Vacuum Pump 4.5cfm AC Vacuum Pump, 1/3hp 110V Air Conditioning Vacuum Pump Kit for R134a R410a R12 R22 Systems, Vacuum Pump Automotive, 250ml Oil Included

  • PUMP IT OUT: This single-stage rotary vane vacuum pump from Orion Motor Tech is powered by a 1/3 hp all copper motor to keep your vehicle AC servicing fast and easy.
  • its 4.5 cfm flow rate can draw your system down as low as 37.5 microns (5 Pa) and is able to quickly degas batches of resin, epoxy, oil, and other solvents when equipped with a vacuum chamber.
  • SAFE & DURABLE: The reinforced aluminum alloy casing effectively dissipates heat generated during operation and resists chemical corrosion for years of quality use.
  • its innovative design prevents oil backflow and separates the exhaust from any oil vapor, limiting contamination and providing safer operation, while the reinforced power cord ensures superior durability.
  • USER FRIENDLY: The 7.6 fl. oz. reservoir includes a sight glass and scale for easy monitoring of the pump's oil level and quality.
  • the light weight and sturdy handle keep everything easily portable for transport or storage between jobs.
  • and 1/4 inch and 3/8 inch ports allow fast and easy servicing of automotive and other low-tonnage R12, R22, R134a, R410a, and R502 systems.
Check Stock

Titan Ramps Heavy Duty Aluminum Semi Truck Riser Ramp 20,000 LB Capacity

  • ...m design also protects the ramps from rust and corrosion, so your ramp will always continue to look and perform like new..
  • SPECIALLY DESIGNED FOR LARGE TRUCKS: The length of the ramp is 43in to the top platform that is 20.5in long. The HD ramp will raise your vehicle 9in from the ground, providing plenty of room for servicing the under carriage and routine maintenance such changing the oil and replacing filters and plugs..
  • ALL WELDED DESIGN WITH NO ASSEMBLY: These ramps come fully assembled with all of the aluminum body seams fully welded. There are supports the help reinforce the truck ramp to prevent any movement when loading your vehicle. Simply remove the ramp from the box and you are ready to put it to use..
  • 10 TON CAPACITY PER PAIR: These lightweight aluminum vehicle ramps have reinforcements that provide stability and structural support, allowing you to load your truck or tractor trailer with peace of mind. The combined capacity of these ramps is 20,000 LB..
  • RAMP DIMENSIONS: This pair of aluminum truck riser ramps weighs 90 LB combined. The overall length is 63.75in, the top platform is 20.5in and has a ramp length of 43in, allowing you to lift your big rig up for maintenance or for displaying purposes. These ramps allow you to raise your vehicle ....
Check Stock

Dorman W610163 Drum Brake Wheel Cylinder Compatible with Select Models

  • Ideal replacement - specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles.
  • Cost-effective fix - replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance.
  • Quality materials - made with high-quality EPDM rubber cups and boots for long-lasting performance.
  • Professionally tested - wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock