Categories

Best Ventilation Terminal

400Pcs 2.8/4.8/6.3mm Quick Splice Male and Female Wire Spade Connector Crimp Terminal Block Assortment Kit Golden with Insulating Sleeve for Electrical Wiring Car Audio Speaker N-002

  • Three types of gold flat terminal set (2.8mm, 4.8mm, 6.3mm male and female) total are used in toggle switch, speaker, horn, etc. This terminal set contains 480 products, 240 terminal insulated sleeves, 120 female insulated sleeve, and 480 total products. It is a fastel terminal that is always used for car, motorcycle, home center, wiring work, repair..
  • It is made of high quality brass, and it has good electrical conductivity and durability. This connection terminal set has a large number of male Messiah terminals and insulated male / female sleeve, so please use it in a safe manner..
  • The safety cover is attached to each of the male and female terminals. It is the terminal terminal set suitable for insulation such as electric wire, horn, general relay, etc. A flat terminal terminal is used for connecting horn, speaker, and general relay..
  • First, the insulated sleeve is connected to the wire, and then the female and the male terminal of the male are connected to the end of the cable. Please note: connect the wiring cord using a dedicated electrician pouch..
  • This terminal set (110, 50, 187, 40, 250, 30) comes with a plastic storage case, easy to carry and take out. It is widely applied to automobiles, motorcycles, transportation, machinery, distribution, el....
Check Stock

Terminal Strips, FIXITOK 6 Sets 4/5/6 Positions Terminal Block Strips Waterproof 600V 15A Screw Terminal Strips with 400V 15A Pre-Insulated Terminal Barrier Strip Jumper

  • PRACTICAL TERMINAL STRIPS - Our double row screw terminal strips can help you to connect bare wires to avoid clutter, while jumpers allow signals or power to be distributed neatly, making wiring connection simpler and more efficient. With Fixitok’s screw terminal blocks, you can quickly disconnect a wiring branch without removing the entire system..
  • SAFETY DESIGN - Compared with traditional terminal strip blocks, ours’ come with protection covers to avoid accidental touching when use. We also provide red and black jumpers to help customers distinguish positive and negative wire when installation..
  • HIGH QUALITY MATERIAL - The 4/5/6 positions terminal block strips are made from polycarbonate with flame retardance and nickel-plated copper with excellent electrical conductivity and anti-oxidation performance, to keep working stably and extend lifespan..
  • EASY INSTALLATION - Installation is a breeze. There are two screw holes at each sides of the terminal blocks, you just need to fix them with screws and connect cables. We provide 3 kinds of terminal blocks (4/5/6 positions), to meet your different needs of wiring on machinery, electric power, home appliance, computer or other automatic equipment. For 8/10/12 positions, please search for B08D3J19FT on Ama....
Check Stock

AC Infinity AXIAL 1238W, Muffin Fan, 115V 120V AC 120mm x 38mm High Speed, for DIY Cooling Ventilation Exhaust Projects

  • Designed for projects that requires cooling or ventilation.
  • or as a replacement fan for various products..
  • Terminal connectors, includes optional wire-leads cord adapter. For same kit with plug cord and grilles, see model HS1238A-X..
  • Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
  • High Speed: This model is designed to maximize airflow and can be too loud for some applications..
  • 120 x 120 x 38 mm ( 4.7 x 4.7 x 1.5 in. ) | 100 to 120V AC | Airflow: 110 CFM | Noise: 47 dBA | Speed: 2600 RPM.
Check Stock

MILAPEAK Terminal Block and Strip - 6 Sets 4/5/6 Positions 600V 25A Dual Row Wire Screw Terminal Strip Block with Cover + 400V 25A Pre-Insulated Terminals Barrier Strips Jumpers (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered wire connection? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal strip block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row terminal strip blocks that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strip blocks are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making individual connections or by using the whole barrier bar or part of it up to multiple connections to a single line. Once the connections have been made, cl....
Check Stock

MILAPEAK Terminal Block and Strip - 6 Sets 4/5/6 Positions 600V 15A Dual Row Wire Screw Terminal Strip Block with Cover + 400V 15A Pre-Insulated Terminals Barrier Strips Jumpers (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered wire connection? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal strip block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row terminal strip blocks that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strip blocks are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making individual connections or by using the whole barrier bar or part of it up to multiple connections to a single line. Once the connections have been made, cl....
Check Stock

CGELE 6 Sets Terminal Blocks, 6Pcs 4/5/6 Positions 600V 25A Dual Row Screw Strip Block + Pre-Insulated Terminals Barrier 60Pcs Insulated Fork Wire Connector, 25A 4/5/6P+6 pcs Jumpers

  • ★【What You Get】 - In this terminal block set,it include 2pcs 4 positions/2pcs 5 positions/2pcs 6 positions 600V 25A double row screw terminal strip blocks with cover,6pcs 400V 25A pre-insulated barrier jumper strips,60pcs insulated fork wire connectors.Total 72pcs packed in a bag..
  • ★【Easy Install】 - The terminal strips are easy to install and held in place by two screw holes at either end of the terminal.The fork terminal stripe can be cut in any position to meet with your different demand.You have the option of of making 4/5/6 individual connections or by using the whole barrier bar or part of it up to 4/5/6 connections to a single line. Once the connections have been made, clear plastic covers are included that push lock into place to protect the terminals..
  • ★【Heavy Duty】 - Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. The shell is made with flame resistant material, more safer. Copper plate conductor has good electrical conductivity and also nickel plated has a better anti-oxidation performance which make it more durable..
  • ★【Protect Cover】 - Our double-row connecting terminal also includes a transparent cover to shield dust and protect the term....
Check Stock

Terminal Block,2 Pack 8 Circuits 20-30A 200v-450v Dual Row Screw Terminals Strip +32 PCS Heat Shrink Wire Connectors

  • Practical Terminal Block Kit:How to clean up your cluttered wire connection?Our double row screw terminal strip block can help you to connect bare wires to avoid clutter, making wiring connection simpler and more efficient.This way you can easily disconnect a wiring branch without taking down the entire system..
  • Product Feature:The dual row terminal blocks are designed with screws, you can crank down on them for a firm bite.
  • We also provide thick copper heat shrink wire connectors to ensures strong secure crimping every time..
  • Heavy Duty:The terminal blocks are high quality flame retardant PC engineering materials, with excellent flame retardant and impact resistance. High-quality insulated fork wire connectors kit is thick copper,with safe and durable..
  • Easy Install:The terminal strips are easy to install and hold in place by two screw holes at either end of the terminal. One mounting hole each end for fixed mounting.The fork terminal stripe can be cut in any position to meet with your different demand..
  • Package Included:2 x 8 positions dual row terminal blocks set,32 pcs insulated fork wire connectors in a bag.Terminal Block rated voltage/current Universal : 20A-30A/200-450V.And 100% guaranteed,If you have any questions about the product, we support un....
Check Stock

2PCS Battery Terminal Connectors 4 Way Quick Release Disconnect Battery Terminals Positive Negative Battery Cable Ends for SAE/JIS Type A Posts by ZONBANG Copper

  • 【4 WAY BATTERY TERMINAL】There are 4 posts for wire connection in the battery terminal connectors which are mainly used for SAE / JIS Type A car battery. The purpose of the design is for multiple cable connections..
  • 【EXCELLENT QUALITY】With superior corrosion resistance and electrical conductivity, the tinned copper quick release battery terminal also can reduce voltage distortion and transmission loss..
  • 【EASY TO IDENTIFY】With the signs of positive “+” and negative “-”, the quick disconnect battery terminal is easy to identify. And the battery terminal works great for replacing worn out and corroded terminals. Tip: Make sure to choose the correct terminal for the correct polarity..
  • 【PACKAGE INCLUDE】You will receive 2PCS battery terminal connectors(positive and negative), 2PCS anti-corrosion fiber washers and an allen wrench..
  • 【WIDE APPLICATION】The battery terminal connectors can be used for Trailer, Winch, Truck, Tractor, Jeep, RV, Cars, Vans, Caravan, Boat, etc..
Check Stock

Schumacher BAF-MT1 Zinc-Plated Marine Terminal Ends – Fits 3/8-inch and 5/16-inch Posts

  • DESIGNED FOR MARINE USE: Easily replace your boat battery’s terminal ends with a high-performance alternative..
  • RELIABLE: The Schumacher BAF-MT1 Zinc-Plated Marine Terminal Ends are three times more conductive than other terminal ends..
  • USABLE: The BAF-MT1 includes one positive 3/8-inch terminal end and one negative 5/16-inch terminal end..
  • BUILT GREEN: Meets the standards established for RoHS (Restriction of Hazardous Substances) compliance..
  • SUPERIOR CONSTRUCTION: The BAF-MT1 replacement Marine Terminal Ends feature heavy-duty zinc-plated construction..
  • LONG-LASTING QUALITY: Trust Schumacher Electric for reliable and well-made battery accessories. Schumacher has been producing quality automotive products since 1947..
  • EASY TO USE: The BAF-MT1 replacement terminal ends feature easy-to-tighten wing and hex nuts for a secure connection..
Check Stock

20Amp 2x10 Position Barrier Terminal Block Distribution Module for AC DC

  • 20 Amp 48V 2x10 Position Barrier Terminal Block Distribution Module for AC DC. You can chose input from Barrier terminal block, Banana jack or DC....
  • Rated current 20 Amp(input from barrier terminal block). Input from banana jack maximum current 6 Amp. Input from DC power jack maximum current 5 Amp.....
  • Barrier terminal blocks: pitch 7.62mm, screw Metric M3(thread diameter 3mm). Banana jacks: standard 4mm jack. DC power jack: for 5.5mm x 2.1mm plug..
  • Packing list: 1x Terminal block distribution module. 1x Red banana plug. 1x Black banana plug. 11x Red spade terminal connectors (support wire 0.5 to....
Check Stock

Glarks 124Pcs(8Sets) Terminal Block Set, 8Pcs 3 4 5 6 7 8 10 12 Positions 600V 15A Dual Row Screw Terminals Strip + 16Pcs Pre-Insulated Barrier Strips + 100Pcs Insulated Fork Wire Connector

  • ★【What You Get:】In this terminal block set, it include 8pcs 3 4 5 6 7 8 10 12 positions double row screw terminal strip blocks with cover, 16pcs black and red pre-insulated barrier jumper strips, 100pcs insulated fork wire connectors. Total 124pcs are well packed in a box..
  • ★【High Quality:】The terminal blocks are high quality flame retardant PC engineering materials, with excellent flame retardant and impact resistance (transparent dust cover is not flame retardant). High-quality brass guide, excellent electrical conductivity, the appearance of nickel-plated, rust and durable..
  • ★【Product Feature:】The dual row terminal blocks are designed with screws, you can crank down on them for a firm bite.
  • Also include a clear cover to protect accidental touching of the terminal. Transparent cover, clear and intuitive internal components, allows for visual inspection of insert terminals..
  • ★【Easy to Install:】The terminal strips are easy to install and hold in place by two screw holes at either end of the terminal. One mounting hole each end for fixed mounting.The fork terminal stripe can be cut in any position to meet with your different demand. Come with 100pcs 22-16(red) /16-14 (blue) /12-10(yellow) fork spade wire connectors for easy wire c....
Check Stock

TKDMR 2Pairs Car Battery Cable Terminal Clamps-Connectors - Battery Terminal with Plastice Cover,Good Contact,Corrosion Resistance,Applicated in Car,Van.

  • √【Package Includes】: Our kit includes 2 pair of Negative and Positive Battery Cable Terminal Clamps Connectors and 4 pieces Pure Copper Wire Lugs Battery Cable Ends Copper Eyelets Tubular Ring Terminal Connectors..
  • √【High Quality】: Our Wire Lugs Eyelets Tubular Ring Terminal all are made of pure copper.And the Battery Terminals connectors has plastic cover, which is connected better than zinc alloy and has better corrosion-resistance..
  • √【Size】: Positive Battery Terminal Connectors:11/16"(17mm).
  • Positive Battery Terminal Connectors: 5/8"(16mm).
  • √【Applicated Scene】: It is used for automobiles, trucks and caravan battery terminal connector..
  • √【Quality Guarantee】: We are manufacturers. So don't worry about quality. We are highly confident with our products.you won't regret it if you got it! Buy it now!.
Check Stock

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock