Categories

Best Vertical Milling

Milling on the Drill Press (DVD, 4 Hours)

  • ...【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high precision positioning adjustment scale,which can be moved from front to back,left and right.It is important to note that this lathe has only a metric scale..
  • 【With MT3-ER32 Collect Chucks】Mini Mill Grinding machine comes with a set of MT3-ER32 milling chucks,without additional purchase.The size:4-3/5-4/6-5/8-7/10-9/12-11/14-13/16-15.Different sizes of chucks will meet....
Check Stock

Mega Mini R8 Milling Machine, the only True Inch machine on the market, .50 inch-per-turn table feed screw, a powerful brushless 500W motor

  • X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Voltage: 110V, 60Hz. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs..
  • Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions..
  • High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well..
  • Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop..
  • Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8" diameter shaft on the end. Such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc..
Check Stock

Milling Bronze Gear,Power Feed Bronze Gear Bridgeport for Bridgeport Milling Machine

  • ... constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work.And this multifunctional milling machine power feed can work with excellent speed control in the entire range according to your needs..
  • 【WIDE APPLICATION】This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8" diameter shaft on the end,But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above.NOTE:Any shipping damage,using problems or missing accessories, please feel free to cantact us, we will solve them for you..
Check Stock

SPECSTAR Chainsaw Mill Portable, 14 to 36 Inches Planking Milling Guide Bar, Lumber Wood Cutting Sawmill

  • ...aluminum and galvanized steel, SPECSTAR chainsaw mill is sturdy enough to be used in high-intensity outdoor projects for years.
  • The lightweight and portable design makes it easy to be taken to any remote location.
  • Overall dimension: 35.4" × 12.6" × 18.1".
  • HIGH ACCURACY - Follow the accurate measuring scales on the vertical bars to adjust screws on each side.
  • The maximum milling thickness can reach 14".
  • Chain saws whose length of saw blade is between 10" and 36" all match well with SPECSTAR chainsaw mill.
  • EASY TO ASSEMBLE - All necessary mounting parts are included in the package.
  • Assembly could be finished in a few minutes by following our instruction, no other tools are needed.
  • Any problem you may encounter during mounting would be quickly responded by our professional service team.
  • SAFE TO USE - The unique designs ensure you great safety and convenience during milling operation.
  • Glass protective cover prevents wood chips from splashing.
  • U-shaped steel parts effectively protect the saw blade.
  • Ergonomic handle helps you to achieve labor-saving and long time milling work.
  • WIDE APPLICATION - This high-quality chainsaw mill can process almost all wood.
  • Perfect for woodworkers, carpenters, homeowners and outdoor enthusiasts.
Check Stock

Bushfire Rescue (Extreme Adventures #2 )

  • Solid Cast Iron Construction: Swing: 6-1/2"/168 mm. The dividing head features a rigid mirror finish that is wear-resistant, a good choice for long-term use. Its delicate parts work perfectly, mathematically dividing the materials to be cut..
  • Easy of Adjustment: The headstock of the dividing head for the milling machine can tilt from 10 degrees below horizontal to 90 degrees vertical so that you can handle the stuff of different sizes by changing its angle..
  • High Precision Indexing Plate: The universal dividing head comes with a direct indexing plate and an interchangeable one on the head, and two replacement interchangeable ones with different numbers of holes. It's the dividing plates that set the precise distance between cuttings..
  • Strong Workpiece Support: The coming package also includes a tailstock that will give strong support to the long metal stick you are going to deal with, providing a more stable working condition..
  • Versatile Application: The rotary indexer is used on the tables of milling machines and other machine tools, including drill presses, grinders, and boring machines..
Check Stock

Mophorn BS-0 Dividing Head 5 Inch, Precision Dividing Head Set with 5

  • STRONG IN CONSTRUCTION - Swing: 5.5"/140 mm. The dividing head features a rigid mirror finish that is wear-resistant, a good choice for long time use. Its delicate parts together work perfectly, mathematically dividing the materials to be cut..
  • EASE OF ADJUSTMENT - The headstock of the dividing head for milling machine can tilt from 10 below horizontal to 90 vertical so that you can handle the stuff of different sizes by changing its angle..
  • WITH HIGH PRECISION - The universal dividing head comes with a direct indexing plate and an interchangeable one which is on the head, and two replacement interchangeable ones with different numbers of holes on them. It's the dividing plates that set the precise distance between cuttings..
  • STRONG WORKPIECE SUPPORT - The coming package also includes a tailstock which will give strong support to the long metal stick you are gonna deal with, providing a more stable working condition..
  • WIDE APPLICATION - The rotary indexer is used on the tables of milling machines and other machine tools including drill presses, grinders, and boring machines..
Check Stock

SHZOND Power Table Feed X-Axis 150 LBS Torque Power Feed 200 RPM Adjustable Rotate Speed for Bridgeport and Similar Vertical Milling Machine

  • Very High Quality 4" /100 mm Regular Rotary Table designed for smaller milling machines.
  • Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees..
  • Center Height in vertical position: 2-1/16" (50 mm approx) Hand wheel is graduated in divisions of 10 min & can be set to zero..
  • Can be mounted both in Horizontal & vertical position..
Check Stock

Mini Vertical Milling Slide Mounted on Z Type Caste Iron Angle Plate -Direct Fit for Mini Lathes

  • Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes upto 150 mm Swing.
  • Base Dimension :50 x 55 mm * Sliding Table :90 x 50 mm * Vertical Travel 40 mm.
  • Tee- Slot width 9.5 mm Maximum *Jaw Opening : 70 mm * Adjustable Vice Jaws & Brass Gib.
  • Supplied with a Z type Angle Plate. Precision ground from all sides/ faces for perpendicularity/ squareness..
  • One base side of the Caste iron has 2 x Counter drills with suitable stud bolts to clamp the slide and the other has a continuous slot to fasten it through the lathe's toolpost stud. Check all pictures carefully.
Check Stock

5/16" HSS End Mill 8mm Cutting Dia 8MM Shank Dia Extra Long Straight Shank End Mill Bit, 4 Flute High Speed Steel Milling Cutter for Wood, Steel, Aluminum, Titanium, Foam, Total length 100mm

  • Vertical Milling Cutter with Super-Hard Handle, Forged with High-Speed Steel, Quenched at High Temperature, Precision Grinding..
  • Selected High Speed Steel, High Hardness, Wear Resistance, High Strength, Good Toughness and Heat Resistance..
  • Sharp Cutting Edge, Smooth Cutting, Several Times The Cutting Effect, Smooth and Burr Free Cutting Material..
  • Four-Tooth Design Makes The Milling Cutter More Wear-Resistant and Reduces Product Burrs During Processing..
  • Various Specifications, Hard and Firm, Smooth Cutting, Surface Hardness Up to HRC62-66 Degrees..
Check Stock

Wolfcraft Universal Drill Clamp, Plastic, Rotatable I 4802000 I For power drills, milling & grinding motors in horizontal & vertical position

  • for stationary use of power drills, milling and grinding motors in horizontal and vertical position.
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

ASZLBYM 11pcs RPMT10T3 MOE R5 Indexable Carbide Milling Inserts Blade Milling Cutter with 5/8\/16mm SRDPN1616H10 Indexable Carbide Milling Tool Holder Metal Lathe Cutting Tools

  • PACKAGE INCLUDES : You will receive 1pc SRDPN1616H10 5/8”/16mm shank diameter carbide lathe milling tool holder , 11pcs RPMT10T3 MOE indexable carbide milling inserts cutters and 1pc T15 wrench..
  • Material : The SRDPN1616H10 5/8" lathe milling tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The RPMT10T3 MOE indexable milling inserts cutter material is carbide, and the coating is CVD Al2O3 TICN, It has good toughness, wear resistance and high temperature resistance, the milling insert can be used for milling cast iron, steel parts and stainless steel..
  • Milling tool holder cutter size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • RPMT10T3 MOE carbide milling insert size : Insert Style : RPMT , thickness: 0.156" ≈ 3.97mm , diameter : 0.393≈ 10mm, P=11° degree..
  • Easy to store: the milling tool holder and carbide milling inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock