Categories

Best Vertical Powder Coating Plant

XIOFIO 8-Tier Plant Stand for Indoor Outdoor, Large Reinforced Multiple Flower Pot Holder Rack for Multiple Plants Plant Rack,Adjustable Plant Stand Suitable for Bedroom Living Room Balcony Garden,Black

  • ...t more stable. It can be installed in a variety of ways, all the shelves are adjustable, you can use your imagination to install it..
  • 【Large Capacity】43.3" tall plant stand can hold at least 8+ pots, it will give you more storage space without taking up too much space to put it, it will make the best use of your Vertical space and corner positions. Good lighting, adequate ventilation and drainage are good for plants and living environment. In addition to displaying your plants and flowers, you can also put floral tools, crafts, and more on it..
  • 【Easy to Assemble】 A rubber mallet is recommended, but it's not included. Just be sure to read the assembly directions carefully BEFORE you start putting it together. Certain shelves must be installed in a particular order the position of the shelf assembly can be adjusted according to your needs. Moreover, the height can be adjusted with a slip-sleeve locking system by increments of 6 inch each time..
  • 【Professional design & professional service】We have the most professional design team, the strictest product quality control, and provide each customer with the best products,and provide all customers with the most professional after-sales service. XIOFIO garmen rack are made of high-quality carbon stee....
Check Stock

Reese Towpower 8339 Fold-Down Gooseneck Hitch Platform

  • Takes only seconds to raise or lower the ball into position.
  • Forged, heat-treated 2-5/16" chrome ball standard.
  • Includes mounting hardware and integrated drop down spring loaded safety chain loops.
  • Platform and the ball are rated for 25,000 lbs. GTW and 6,250 lbs. vertical load.
  • Designed to allow unrestricted use of the truck bed.
  • Requires no alteration of factory exhaust systems.
  • Fold-down design allows unrestricted use of the truck bed when not towing.
Check Stock

GROWNEER 3 Packs 65 Inches Square Folding Tomato Cages Plant Support Stake Tower with 328 Feet Twist Ties for Tomato Plants Eggplants Cucumber Climbing Plants and More

  • TRELLIS DESIGN -- 7-tier multi-level trellis. Tomato cages give your tomato plants room to grow. Taller and wider tomato cages allow easy access for....
  • MEASUREMENTS -- 14.6" square x 65" H including 9.8” legs. 65 inch height meets the maximum height of most tomato plant varieties. It provides....
  • MATERIAL -- Steel wire with powder coating for long term use, provides strong support for plants to grow vertically. 4.26mm upright wires welded with....
  • EASY TO ASSEMBLE -- 4 panels square frame. No tools needed, this cage takes minimal time and effort to set up. Convenient to store after dismantling..
  • FOR CLIMBING PLANTS -- This tomato cage is designed specifically for vertical climbing plants to provide support. Perfect for growing tomato plants,....
Check Stock

GROWNEER 3 Packs 39 Inches Square Folding Tomato Cages Plant Support Stake Tower with 328 Feet Twist Ties for Tomato Plants Eggplants Cucumber Climbing Plants and More

  • TRELLIS DESIGN -- 3-tier multi-level trellis. Tomato cages give your tomato plants room to grow. Taller and wider tomato cages allow easy access for....
  • MEASUREMENTS -- 14.6" square x 39" H including 9.8” legs. 39 inch height meets the maximum height of most tomato plant varieties. It provides....
  • MATERIAL -- Steel wire with powder coating for long term use, provides strong support for plants to grow vertically. 4.26mm upright wires welded with....
  • EASY TO ASSEMBLE -- 4 panels square frame. No tools needed, this cage takes minimal time and effort to set up. Convenient to store after dismantling..
  • FOR CLIMBING PLANTS -- This tomato cage is designed specifically for vertical climbing plants to provide support. Perfect for growing tomato plants,....
Check Stock

IDOXE 6Pack 4FT Folding Tomato Cages Plant Stakes Support Assembled Garden Vegetable Trellis for Climbing Plants-Adjustable Stake Arms with Climbing Nets,for Flowers,Fruits,Vine,DIY Plant Supports

  • Square Tomato Cages - designed specifically for vertical climbing plants to provide support. Those Garden trellis Perfect for growing tomato plants, pole beans, cucumbers, grapes, and kiwi. So the fruit and leaves don't weigh down the stems.
  • 6 SET Cage Garden Plant Cages & Supports takes few time and effort to set up,NO TOOLS NEEDED.51 inch height meets the maximum height of most tomato plant varieties. Build the plant cages around seedlings or small starter plants so they are ready when the plants begin to grow.
  • Multi-Purpose Vine Trellis VERTICAL GROWTH MODULAR DIY CAGES DESIGN - Not just a triangle,but also Frame Trellis,teepee trellis,tomato tower.Multi-angle adjustment support rod free to adjust the height according to the stage of plant growth, give your vegetable and tomato plant supports perfectly.
  • STRONG AND STURDY folding tomato cage made of stainless steel core and covered with heavy-duty plastic coating.Adjustable height and structure of tomato plant support cage,long-lasting without breaking and more durable than bamboo or wood.
  • Garden Stakes for Plants Package List: 54 Steel core stakes, 54 snap-on arms, 36 connecting pipes, 100pcs plant ties, 1 climbing net.They are good tools for seedlings & starter plants,long-lasting without breaking an....
Check Stock

GROWNEER 6 Packs 65 Inches Green Square Folding Tomato Cages Plant Support Stake Tower with 328 Feet Twist Ties for Tomato Plants Eggplants Cucumber Climbing Plants and More

  • TRELLIS DESIGN -- 7-tier multi-level trellis. Tomato cages give your tomato plants room to grow. Taller and wider tomato cages allow easy access for....
  • MEASUREMENTS -- 14.6" square x 65" H including 9.8" legs. 65 inch height meets the maximum height of most tomato plant varieties. It provides maximum....
  • MATERIAL -- Steel wire with powder coating for long term use, provides strong support for plants to grow vertically. 4.26mm upright wires welded with....
  • EASY TO ASSEMBLE -- 4 panels square frame. No tools needed, this cage takes minimal time and effort to set up. Convenient to store after dismantling..
  • FOR CLIMBING PLANTS -- This tomato cage is designed specifically for vertical climbing plants to provide support. Perfect for growing tomato plants,....
Check Stock

GROWNEER 3 Packs 65 Inches Red Square Folding Tomato Cages Plant Support Stake Tower with 328 Feet Twist Ties for Tomato Plants Eggplants Cucumber Climbing Plants and More

  • TRELLIS DESIGN -- 7-tier multi-level trellis. Tomato cages give your tomato plants room to grow. Taller and wider tomato cages allow easy access for....
  • MEASUREMENTS -- 14.6" square x 65" H including 9.8" legs. 65 inch height meets the maximum height of most tomato plant varieties. It provides maximum....
  • MATERIAL -- Steel wire with powder coating for long term use, provides strong support for plants to grow vertically. 4.26mm upright wires welded with....
  • EASY TO ASSEMBLE -- 4 panels square frame. No tools needed, this cage takes minimal time and effort to set up. Convenient to store after dismantling..
  • FOR CLIMBING PLANTS -- This tomato cage is designed specifically for vertical climbing plants to provide support. Perfect for growing tomato plants,....
Check Stock

Achla Designs FB-33 Argyle IV Wrought Iron Plant Stand, 24\ H, Graphite

  • Sturdy construction– The tops of these standing plant holders have a simple argyle crossbar pattern. With straight legs, They are sturdy enough to hold even large pots..
  • Graphite Powder coated finish – These metal plant stands have a Graphite powder coated finish, giving them a clean, modern look. The powder coating results in a high-quality finish that has the look of natural iron but is more durable and resistant to weather. This sleek Graphite finish will look great in any area of the home, yard, porch, patio, or garden..
  • Multiple sizes – These flowerpot stands are available in four different sizes. Create a tiered grouping of plants with varying heights. Lift plants just off the floor or up to windowsill Height. Tallest argyle stand IV, FB-33 has a 12-in diameter top, 17 ¼ -in diameter base and stands 24-in H..
  • Hand-forged wrought-iron stands – all of our decorative plant stands are handmade using fine wrought iron. Our in-house design team brings together varied expertise in the fields of mechanical engineering, architecture, fine art, sculpture, and metallurgy. This expertise results in high-quality, beautiful plant stands. Since our products are hand forged, exact dimensions may vary slightly..
Check Stock

iDavosic.ly 5 Tier Metal Plant Stand Shelf for Indoor Outdoor, Rustproof Corner Flower Pot Holder Stand, Multi-tier Foldable Planter Rack Display Shelves for Patio Living Room Balcony Office (White)

  • ... flower stand. The nesting display stand is space saving when stack the three together in the corner. Size information, L: 27.75in(H) *12.60(W). M: 23.82in(H) *11.02(W). S: 19.88in(H) *9.45(W).
  • 【Easy to Set Up】 The plant stand outdoor can be quickly assembled with a simple wrench within half an hour.
  • The powder coating smooth surface are easy to maintain with a clean cloth.
  • 【Durable Material】 The modern plant stand is made of heavy duty metal. Wear-resistant powder coating ensure the plant rack waterproof and rustproof for durability, and can safely hold things weighing up to 50 lb.
  • 【Lightweight and Portable】 The lightweight structure makes these plant stands more easy to move and it is portable after disassembly and put into a box to carry outdoor indoor. If there are children or pets at your home, please put them against the wall or you can also put flower pots on the bottom layer to avoid tipping caused from accidental collision.
Check Stock

Achla Designs FB-32 Argyle III Wrought Iron Plant Stand, 18\ H, Graphite

  • Sturdy construction– The tops of these standing plant holders have a simple argyle crossbar pattern. With straight legs, They are sturdy enough to hold even large pots..
  • Graphite Powder coated finish – These metal plant stands have a Graphite powder coated finish, giving them a clean, modern look. The powder coating results in a high-quality finish that has the look of natural iron but is more durable and resistant to weather. This sleek Graphite finish will look great in any area of the home, yard, porch, patio, or garden..
  • Multiple sizes – These flowerpot stands are available in four different sizes. Create a tiered grouping of plants with varying heights. Lift plants just off the floor or up to windowsill Height. Medium argyle stand III FB-32 has a 10 ½ -in diameter top, 14 ½ -in diameter base and stands 18-in H..
  • Hand-forged wrought-iron stands – all of our decorative plant stands are handmade using fine wrought iron. Our in-house design team brings together varied expertise in the fields of mechanical engineering, architecture, fine art, sculpture, and metallurgy. This expertise results in high-quality, beautiful plant stands. Since our products are hand forged, exact dimensions may vary slightly..
Check Stock

Highpro Vertical Garden Planter, 5 Tiers Vertical Raised Garden Bed Metal Elevated Herb Planter Box Vegetable Flower Planters for Patio Deck Outdoor Indoor

  • 5 TIERS VERTICAL PLANTER - Highpro vertical garden bed features five tiers of planter boxes, and the standing frame is made of solid powder-coated metal, which is rust-resistant and durable. Overall size: 25.9"(W)*28.3"(D)*45"(H), and each plant box can hold 0.6 cubic feet soil..
  • STURDY & HEAVY-DUTY - Built with high-quality steel to ensure stability for holding the combined weight of soil, water, and plants. With the triangular design, the main frame can stand very stable, always hold your herbs, flowers, and vegetables upright..
  • UNRESTRICTED PLANT GROWTH - With a more scientific angle, Highpro vertical herb garden can raise more plants than other brands, the upper tiers of the garden box won't restrict the plants' growth in the lower box, making the most of the sunlight in the meantime..
  • SUFFICIENT SPACE & EFFECTIVE DRAINAGE - Planter box size: 23.6"(L)*7.48"(W)*6.3"(D), and each one has two drainage holes to improve water drainage and prevent waterlogging, protecting the plants' roots perfectly. Ideal for tight & limited space, such as balcony, deck, patio, apartment, etc..
  • EASY TO ASSEMBLE - Easy assemble in just a few minutes, also, the installation instruction is included in each package, if you have any questions about our vertical raised garden p....
Check Stock

Garden Trellis 2 Pack 60\ Tomato CageTall Plant Support Climbing Vines Flowers Stands,Plant Cages & Supports for Vines Crop Vegetable, Flowers,Potted Plants,with 30pcs Plant Clips

  • 【Multiple Usage Patterns】You can assemble it to use its normal ring cage, or just use vertical poles to line up in a row. And you can also adjust its height, from the shortest one ring to the highest four. This can meet the needs of different plants and also meet your preferences..
  • 【Strong & Durable】MNOPQ plant stakes Made of durable iron and the surface is covered with non-fading black plastic coating for weather and rust protection,long service life,it allow you used in outdoor or indoor for climbing plant trellis, potted plant trellis, flower trellis etc..
  • 【Elegant Design】Used matte black finish which make the garden plant trellis can easily blends in with natural surroundings. You can use it for your plants and twine with fairy light for beautiful night time scene. As a perfect decoration for your yard, garden, patio etc..
  • 【Easy Assembling】Our Garden Trellis structure is simple, only need to assemble each component in order according to the manual, without any tools. This tomato cage can be multi-angle adjustment support rod free to adjust the height according to 32, 48, 60 inches..
  • 【Wide Applications】Our garden trellis can help the growth of several vertical climbing plants such as jasmine, beans, or roses. this design ensures th....
Check Stock

Achla Designs FB-20 Tulip Wrought Iron Plant Bowl Stand, Roman Bronze

  • ...ne has an open top so that flowerpots can rest against the four legs of the stand. Another model has a removable metal insert on which you can set flowerpots and other planters..
  • BRONZE POWDER COATED FINISH – These metal plant stands have a Roman bronze powder coated finish, giving them a cute, modern look. Powder coating results in a high-quality finish that is more durable and resistant to scratching than regular liquid paints. This sleek bronze finish will look great in any area of the home, yard, porch, patio, or garden..
  • TWO-TIERED CONSTRUCTION – These tulip-shaped plant stands have two tiers on which you can set flower pots and planters. The upper level has a 15-inch diameter and can hold a large pot, planter, or even a bird bath when used without the insert. The bottom level is close to the floor and can be used for a smaller pot or planter. The stand is 28.5 inches tall..
  • HAND-FORGED WROUGHT-IRON STANDS – All of our decorative plant stands are handmade using fine wrought iron. Our in-house design team brings together varied expertise in the fields of mechanical engineering, architecture, fine art, sculpture, and metallurgy. This expertise results in high-quality, beautiful plant stands. Since our products are hand forged, exact dimensions ....
Check Stock