Categories

Best Vertical U bolt

XXW Barrel Bolt Door Latch With Padlock Hole, Thickened 304 Stainless Steel Slide Door Lock, 4 Inch Black, 204BB-BL

  • [360 ° Installation]Can be installed to any orientation, applied to doors, Windows, cabinets, cabinets..
  • [Humanization Design]In vertical & horizontal use the notch-in case holds the bolt in a locked position..
  • [304SS Door Latch]Solid T-304 stainless steel,Rust-proof and corrosion-proof,stronger than normal sliding door lock..
  • [Security & Protection]The barrel bolt with padlock hole,can be locked.Keep those pesty intruders away with this high quality door latch..
  • [Simple to install] U only need a screwdriver to complete the installation..
Check Stock

Shocker Hitch Vertical Channel Weld On Tongue Adapter for Trailer A-Frames Completely Welded

  • Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame. Trailer Tongue Vertical Channel Style Weld On Adapter for Trailer A-Frame..
  • Equipped with 6 Adjustment Holes. Raw Steel. The six bolt hole pattern works great with typical vertical channel bolt on trailer couplers. Actual vertical channel is 3-1/2" x 11-3/4" w/ 2" on center bolt pattern.
  • The outer front is 4" wide, the outer rear is 11" wide. From front to back it measures 7-1/2". Weight Rating: If you are using 2 bolts to attach coupler then its 14,000 lbs if using 4 bolts then 20,000 lbs that also assumes this kit is properly weld onto the trailer and the coupler you are using can handle those respective capacities..
  • Allows you to convert your trailer a-frame to one that accepts Vertical Channel couplers. Welding required for installation..
  • 3 Style to choose from - Completely Welded, Spot Welded & Components Only (2 Sides,Base & Vertical Channel). Made in the USA by Shocker Hitch - Arthur, ND.
Check Stock

Seachoice Trailer Coupler, Repair Kit, 2 in.

  • Quickly mounts to your trailer tongue. Choose from vertical channel mount (fits 3-1/2 inch wide OD / 3 inch ID vertical channel with 2 inch on center bolt pattern secure with 5/8" pins or bolts) or square plate 4 bolt mount (4-1/2 inch square bolt pattern).
  • Smoother safer towing. Improves your ride, reduces wear & tear on pickup & trailer. Great for heavy duty trailers from end dumps, race trailers, cargo trailers, tilt trailers, storage container & flat beds Instant air ride for your trailer..
  • 20,000 lbs rated trailer towing capacity with a cast 2 5/16 inch heavy duty demco cast coupler. 2,000 lbs tongue weight. Great for bumper pull race trailers, dump trailers and skid steer trailers..
  • Air ride technology: Built-in HD air bag for a smoother towing experience with built in height adjustment plus weight adjustable. Perfect when you don't know what pickup will be towing your trailer. Fine tune for your towing weight. Just add air for heavier loads. Absorbs the road bumps, thumps & bangs on whatever road you travel.
  • Made by Shocker Hitch USA. Optional weld-on vertical tongue adapter available &sold separately. Note: The main pivot bolt used in the Tongue Mount air coupler is a custom made 1 inch diameter 1045 medium carbon steel bolt. Heat treated to pre....
Check Stock

XXW BARREL BOLT DOOR LATCH With PADLOCK HOLE, THICKENED 304 STAINLESS STEEL Slide DOOR LOCK, 4 INCH, BLACK, 2 PACK, 204BB-BL-2

  • [360 ° Installation]Can be installed to any orientation, applied to doors, Windows, cabinets, cabinets..
  • [Humanization Design]In vertical & horizontal use the notch-in case holds the bolt in a locked position..
  • [304SS Door Latch]Solid T-304 stainless steel,Rust-proof and corrosion-proof,stronger than normal sliding door lock..
  • [Security & Protection]The barrel bolt with padlock hole,can be locked.Keep those pesty intruders away with this high quality door latch..
  • [Simple to install] U only need a screwdriver to complete the installation..
Check Stock

Square U Bolt in Zinc 3/8 x 3 x 7 U Bolt Zn Industrial and Scientific Supplies U Bolts for Boat Trailer Tube Rectangular Wood and Metal Objects 4 Pieces

  • Common Size: the square U bolts measures about 3/8 inch in diameter, 3 inch in width and 7 inch in length, proper for 3 x 3 inch square, suitable size can meet your different fastening needs, please check the size before ordering.
  • Sufficient Quantity: you will receive 4 pack of square U bolts in zinc, including 4 pieces of u bolts, 4 pieces of frame plates and 8 pieces of nuts.
  • Enough quantity satisfy your uses and replacements.
  • Hard Material: the square U bolt adopts carbon steel material, and with zinc plated, sturdy and reliable, with nice rust and corrosion resistance, each bolt can withstand the weight, still perform well in rainy and wet environments.
  • Wide Applications: the U bolts are widely suitable for various fields, such as industry, manufacturing, maintenance, the automotive sector, clothing production, etc., ideal for fastening tubes, woods, trailer, and so on.
  • Tips: It is recommended to use lubricant during installing the U bolts to prevent wear and tear.
  • Use a manual wrench or socket ratchet when installing nuts.
  • Do not use high speed power tools or impact tools to tighten the nuts.
Check Stock

4 Sets 304 Stainless Steel Square U-Bolt Boat Trailer U-Bolts with Washers and Nuts L Heavy Duty U Bolts for Sailboat Trailer Automobiles Trailer Industrial Parts 1/2 D x 3 1/16 W x 4 5/16 Inch

  • Package includes: stainless steel u-bolt set include 4 pieces u-bolts, 8 pieces stainless steel flat washers, 8 pieces stainless steel nylon lock nuts, 8 pieces lock washers, all accessories are made of 304 stainless steel.
  • U-bolt size: 1/2 x 3-1/16 x 4-5/16 inch (D x W x L), thread length: 2-1/2 inches, suitable for 3 x 3 inch square beams and shafts.
  • Stainless steel material: u bolts for boat trailer are made of 304 stainless steel, strong and long-lasting.
  • These 304 stainless bolts prevent rust corrosion, acid corrosion and wear.
  • It's still perform well in rainy and humid seaside environment.
  • How to use: firstly choose the corresponding square U shaped bolt according to the size of the pipe, then drill holes in the connection, and finally lock nut and flat washer.
  • Use a hand wrench or socket ratchet when installing nuts.
  • Do not use an impact or a high speed socket driver.
  • Wide application: square u-bolt is applied to fix or connect the locked parts to rectangular wood and metal objects, such as cars, sailboat trailers, pipe, tube, plumbing and other industrial applications.
Check Stock

Prime-Line 9071931 U-Bolts, Round Bend, 1/4 inch-20 X 1-1/8 inch X 2-1/4 inch - (3/4 inch Pipe), Zinc Plated Steel, (10-pack)

  • STOP: ONLY USE a Hand Socket Ratchet or wrench to run the nuts up and tighten..
  • DO NOT USE an impact or powered socket driver. Ignoring this instruction will cause U-Bolt Galling / Seizing / Breaking / Failure / Expletives / Sawzall. Let's keep it Fun, and Successful..
  • U-Bolt Size: 1/2" Diam x 3- 1/16" Inside Width x 5- 5/16" Inside Height (Length).
  • Attention: When measuring for Your needed Height (Length), add 1" for the nut and washer..
  • Threading: 1/2"-13 with a thread length of 2- 1/2"..
  • U-Bolts and hardware are made out of 304 Stainless Steel..
  • These U-Bolts will fit on 3" x 3" cross members, such as 3" x 3" box steel..
Check Stock

Upper Bounce Trampoline Safety Enclosure Set of Net, 8 Poles & Hardware, Fits 13 FT. Round Frame - Installs Inside Frame

  • Included in the Set: This Upper Bounce trampoline safety enclosure set includes safety enclosure net, 8 heavy duty upper and lower trampoline poles, trampoline pole foam sleeves for poles, 8 trampoline pole caps and 16 u-bolts (2 U-bolts for each pole)..
  • Net for Trampoline: The trampoline net included in this set installs inside the frame. It is compatible with 13ft round trampolines from any brand out there. This trampoline net is tested for its safety and durability to ensure maximum protection..
  • Trampoline Net Poles: This trampoline safety enclosure set comes with 8 heavy duty tarmpoline poles. the trampoline net poles are made from high quality stainless steel which protects the trampoline poles from all types of outdoor weather conditions..
  • Pole Foam Sleeves and Pole Caps: The pole foam sleeves included in this set will protect your kids from getting hurt in case they bump into trampoline poles while jumping. This set also includes trampoline pole caps to cover the top edges of the poles..
  • U-Bolts: A set of 16 U-bolts is provided with this trampoline safety enclosure set. these bolts are used to attach the trampoline poles with the trampoline frame. Each of the trampoline poles uses 2 U-bolts to hold the trampoline poles firmly in place..
Check Stock

Armored Personnel Carrier

  • Tire Fit: This U-bolt type spare tire bracket is suitable for trailer-fitted trailer frames up to 2 inches or 3-4/5 inches wide (up to 4 inches) and can accommodate 15-inch tires. For 4 or 5 lug wheels (bolt style: 4 to 4 or 5 to 4 -1/2).
  • Easy to install: This spare tire mount can be easily installed to secure the tire. Just put the bolt in the trailer's throat and tighten it. The spare tire is installed on the side of the trailer protector..
  • Upgrade double nut design: Prevent the nut from falling off, and don't worry about losing the tire on the road..
  • Durable and rustproof：Our U-bolt trailer spare tire mount is made of thick steel. Can resist deformation. Galvanizing can increase protection against harsh weather conditions.
  • Package：Provide U bolt and 4 lug nuts are supplied.
Check Stock

(4) Hot Dipped Galvanized Dipped Square U-Bolts (1/2\ D x 2 1/16\ W x 6 5/16\ L) for Boat Trailer

  • U-bolt Size: 1/2" D x 2-1/16" W x 6-5/16 L, thread length: 2-1/2" inches, suitable for 2" x 2" square beams and shafts, (order Please check the measurement size carefully before).
  • Hot Dipped Galvanized : U-bolts are made of Hot Dipped Galvanized，The white surface is a thick galvanized layer, which enhances the rust and corrosion resistance of the U-bolt..
  • You can get: (4) U-bolts, (8) hexagon nuts, (8) flat washers, (8) lock washers, these additional accessories are also Hot Dipped Galvanized. With these, you can spend less time repairing and more time boating.
  • Tips:Use a hand wrench or socket ratchet when installing the nut. Do not use high-speed power tools or impact tools to tighten the nuts..
  • After-sales service: Our U-bolts provide a one-year warranty service. Please rest assured, if you have any questions, please feel free to send us an email via Amazon. We will solve it for you within 24 hours..
Check Stock

4G LTE Antenna 4G Antennas Outdoor Dual SMA Male 3G / 4G / LTE Omni-Directional SMA Antenna for Router Mobile Hotspot Wireless Home Phone

  • [Please check before buying] Antenna Connector: Single SMA Male and TS-9 Connectors . Frequency Range: 698-960 / 1710-2700MHZ. Gain: 12dBi. Direction:....
  • [Easy to Install] Designed for exterior installation, with 6m length of wire and smaller size. It can easily be set up in an outdoor space including....
  • [Wide Compatibility] Compatible with any 3G/4G/LTE/GSM Broadband Router, Modem, etc. Enhance the network signal on AT T, Verizon, Sprint, T-Mobile,....
  • [Waterproof&U-Bolt Bracket] The 4g antenna from features a rugged waterproof structure thats designed to withstand damage from the elements. U code....
  • [Installation Reminder] When installing the antenna, please keep it as vertical as possible, install the antenna at the highest place outdoors to get....
Check Stock

UAYESOK UHF Mobile Radio Antenna, 390-470MHZ Freq Adjustable GMRS Base Antenna, 100W 6.0dBi SO239 Connector for Device Repeater Mobile Transceiver

  • [390-470MHz Antenna] Maximum input power:100W.
  • [Mechanical Specifications] Material:Aluminum Alloy.
  • [Adjust the frequency of the antenna] Adjust the scale on the antenna according to the frequency you need(390-470MHz), different positions have different effects.
  • [Aluminum Alloy Mounting Bracket] Hold Pole Diameter:Ø30—Ø60mm.
  • comes with two U-bolt which can be used with the attached plate for pole mounting.
  • use coaxial cable to connect your device(not include the coaxial cable).
  • Heavy-duty weatherproof Aluminum Alloy antenna, integrated ground plane, includes mounting bracket and hardware.
Check Stock

Aopin Round U-Bolts 1-1/2 inch 38mm M6 Inner Width 304 Stainless Steel 8pcs Self-Locking Nylon Insert Hex Nuts Flat Washers for Car/Motorhome/Sailing Trailer Replacement Part and Accessorie 4Pack

  • STOP: ONLY USE a Hand Socket Ratchet or wrench to run the nuts up and tighten..
  • DO NOT USE an impact or powered socket driver. Ignoring this instruction will cause U-Bolt Galling / Seizing / Breaking / Failure / Expletives / Sawzall. Let's keep it Fun, and Successful..
  • U-Bolt Size: 1/2" Diam x 3- 1/16" Inside Width x 4- 5/16" Inside Height (Length).
  • Attention: When measuring for Your needed Height (Length), add 1" for the nut and washer..
  • Threading: 1/2"-13 with a thread length of 2- 1/2"..
  • U-Bolts and hardware are made out of 304 Stainless Steel..
  • These U-Bolts will fit on 3" x 3" cross members, such as 3" x 3" box steel..
Check Stock