Husqvarna K4000 Cut-N-Break Saw Orange
- [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle.
- [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts.
- [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile,....
- [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects.
- [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw.
Check StockWoodhaven 4555 Box Joint Jig
- Cuts any box joint between 1/8″ to 13/16″. This jig is the easiest way to make box joints because the work moves over the jig. That means there’s less chance for error and better results than jigs that require moving both the jig & the work for each cut. And check out the 4553 Upgrade Kit, which is a popular accessory for the 4555 Box Joint Jig..
- Includes a 24″ aluminum Ultra Track with bit/blade cutout and replaceable sub-fences..
- Adjustable aluminum pins prevent part slippage..
- Attaches to any miter gauge, miter gauge not included..
- Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock
UOKRR Precision Miter Gauge for Table Saw Craftsman Telescoping 20" to 36" Aluminum Miter Fence Repetitive Cut Flip Stop 60° Angled Ends for Maximum Stock Support
- Precision Angle Cutting: Accurate out of the box, this miter gauge and fence is easily adjusted to operate on either side of your sawblade. Its angles are very precise and got angle holes for 90, 60, 45, 30, 22.5 and 10 degree angle cuts, it will help you achieve square cuts and cut at an angle..
- Well Constructed: This miter gauge is made of integrated aluminum alloy protractor with laser engraved scale and 9mm thicken plate, it's not easy to deform and with the features of 0.001 inch / 0.02mm high-accuracy. 20" to 36" Telescoping aluminum miter fence with striking metric and imperial scale design will more convenient for your operation, come with a aluminum flip stop for repetitive angled cuts on your table saw..
- Compatible Standard Slot: The length of the miter bar is 19.68", and its slid smooth and perfect fit the guide rail for your table saw, the miter gauge fits standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot, and it can be installed on most table saws..
- Tool Free Installation: The miter gauge is very easy to setup and locking by manually turning the knob, made of premium aluminum alloy with its surface treated by CNC-machined anodic oxidation, which has higher wear resistance, the surface has been deburred and smoothed, no nee....
Check StockMetabo HPT Sliding Compound Miter Saw | 10-Inch Blade | Double Bevel | Laser Marker | 15-Amp Motor | 5 Year Warranty | C10FSHCT
- INCLUDES: C10FSHCT miter saw, 10" 40T TCT Saw Blade, Dust Bag, Vise Assembly, 13mm Box Wrench.
- POWER: Powerful 15 Amp motor to tackle tough cutting jobs with ease.
- BEVEL ANGLE: 0-48 degree bevel angle range to the right and left allows user to quickly and easily flip the saw blade, and leave the material in place.
- MITER ANGLE: 0-60° miter angle to the right and 0-55°miter angle to the left for ultra-flexibility.
- COMPACT SLIDE SYSTEM: Simple and compact slide system allows the saw Head to slide along fixed rails, for zero rear clearance.
Check StockACEgoes 12" Miter Box with Saw Included, Reinforced Steel Back Saw for Accurate Cutting, Preset 90 Degree 45 Degree 22.5 Degree and 0 Degree Cuts
- ☘【Accuracy】The cam-shaped pins can be twist and lock with honeycomb base to secure work for accurate cuts..
- ☘ 【4 Cut Angles】Vertical slots in the miter box allow for the wood to be cut at 45 degrees, 22 1/2 degrees, and 90 degrees. and bevel cut at 45 degrees..
- ☘【Durable】This miter box is made of high-impact polystyrene, sturdy built 1.5lb better than normal. and The reinforced saw blade is made of premium steel, double-sided mechanical grinding..
- ☘【Safe】Minor injuries are the most you can expect when properly using a manual miter saw.
- ☘【Quiet】Little noise will not bother others compared to power saws.
Check Stock
Navaris Miter Box with Saw - Mitre Box with 12" Hand Saw Cutter Tool Included for Cutting Wood Woodwork - Angle Cutter for Joinery
- PERFECT FOR WOODWORK: This woodwork tool set is the perfect pack for helping you to complete your wood work craft projects. Use the precision cutting tool to create angles for wooden frames, shelves and more!.
- SAW INCLUDED: So you can get straight to work on any woodwork projects, you will also receive a 12" hand saw with this mitre. Of course, you can also use your own saw should your choose to..
- SPECS: Overall, this miter box measures 12" x 5" x 3" (30cm x 13cm x 8cm) and is made using ABS. The saw measures 17" x 4.3" x 1.2" (43cm x 11cm x 3cm)..
- MULTIPLE ANGLES: Using this miter box set for woodworking, you can cut lengths of wood at either 90°, 45° or 22.5° angles, for precision wood cutting when it's needed most..
- DURABLE DESIGN: Made using rugged ABS, this miter box and steel saw set will see you woodworking for years to come with the proper care..
Check StockAluminum Box Joint Jig,450x60x30mm / 17.7×2.4×1.2in,for Miter Gauge Woodworking Table Saw Tools
- Aluminum box joint jig fits for miter gauge woodworking tool..
- It can be used on most table saws and router tables with standard slots..
- It is the Box Joint Jig suitable for Miter Gauge..
- Made of high quality aluminum alloy, wear resistant and rustproof..
Check Stock
Olympia Tools Saw Storage Mitre Box with 14-Inch Backsaw with 90 degree, 45 degree, and 22-1/2 degree Angle Slot Types Plastic Mitre Box Saw Storage Mitre Saw Box for Woodworker Carver Carpenter
- PERFECT FOR WOODWORK: This woodwork tool set is the perfect pack for helping you to complete your wood work craft projects. Use the precision cutting tool to create angles for wooden frames, shelves and more!.
- MULTIPLE ANGLES: Using this miter box set for woodworking, you can cut lengths of wood at either 90-degree, 45-degree, and 22-1/2-degree mitre slots., for precision wood cutting when it's needed most..
- SAW INCLUDED: So you can get straight to work on any woodwork projects, you will also receive a 14" hand saw with this mitre. Of course, you can also use your own saw should your choose to..
- SPECS: Overall, this miter box measures 11" x 5" x 3.4" and is made using ABS. The saw measures 17.7" x 3.7" x 1.2" ..
- DURABLE DESIGN: Made using rugged ABS, this miter box and steel saw set will see you woodworking for years to come with the proper care..
Check StockA la Maison Ceilings KL130 Brian Crown Molding, White
- DiY foam crown molding, great wood alternative..
- Cuts easily with miter saw or a fine tooth hand saw using miter box..
- Installs using #310 Instant Grab Adhesive or similar.
Check StockAluminum Box Joint Jig for Miter Gauge, 17.7×2.4×1.2in Woodworking Table Saw Tools, Black
- 1.Aluminum box joint jig fits for miter gauge woodworking tool. It can be used on most table saws and router tables with standard slots..
- 2.Stable fixing device with high precision and excellent workmanship. Good choice for wood splicing process, wooden artworks, etc..
- 3.Stable box joint jig, safer operation with hand-held push table. Reduce the possibility of injury, you can use it with confidence..
- 4.It is the Box Joint Jig suitable for Miter Gauge. Made of high quality aluminum alloy, wear resistant and rustproof..
- 5.We strive to provide a product of the highest quality and the best customer experience, if you are not completely satisfied, do not hesitate to contact us at any time..
Check StockOlson Saw 35-241 Fine Kerf Saw 35-550 42 tpi with Aluminum Thin Slot Miter Box, Slot Size .014-Inch, Slot Angles 45, 60, 90, Cutting Depth 7/8-Inch
- Item Package Dimension: 13.0" L x 4.0" W x 1.5" H.
- 6-1/2in. aluminum miter box has thin slots for 60, 45, 90 degree angle accurate cuts with fine kerf saw..
Check StockRYOBI 7-1/4" Compound Miter Saw
- Powerful 9 Amp motor boasts 5,100 RPM for heavy duty cutting.
- Up to 2 in. X 4 in. cutting capacities and 4-1/4 in. cross cut capacity.
- Miter stops located at the most common angles: 0°, 15°, 22.5°, and 45° left and right for quick cut settings.
- Extended miter range from 47° left and right for a wide variety of cuts.
- This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box.
Check Stock
391926-01 391926-00 for Dewalt Miter Saw DW703 DW705 Replacement Power Switch
- 【PART NUMBER】 391926-01 Replace 391926-00 Miter Saw Power Switch.
- 【This Trigger Switch】( For Eaton Style) is an over hang Trigger Switch replaces for Dewalt 391926-01, 391926-00. Used in table saws and power tools with higher ratings.
- 【Features】Switches are commonly replaced parts in power tools. A switch handles all on/off and variable speed functions. They also have a role in electric breaking.
- they can momentarily reverse electrical polarity. Because switches use mechanical internals, they tend to degrade and wear out over time, eventually requiring replacement. This particular switch comes as a worthy replacement because it offers high quality at a lower price tag..
- 【Specifications】 Voltage: 125/250V. Amperage: 24A/12A..
- 【This part is compatible with】Fits DeWalt: DW703 Type 1 10 Inch Compound Miter Saw, DW703 Type 3 10 Inch Compound Miter Saw, DW705S Type 6 12 Inch Compound Miter Saw, DW705S Type 7 12 inch Compound Miter Saw, DW705S Type 8 12 inch Compound Miter Saw, DW705 Type 6 12 Inch Miter Saw, DW705 Type 7 12 Inch Miter Saw, DW705 Type 8 12 Inch Miter Saw, DW706 Type 1 12 Dual Bevel Miter Saw, DW713 10 Miter Saw.
Check Stock
