Categories

Best Vinylester Resin

Fiberglass Cloth 6 Ounce by 50 Inches Wide - 3 Yards - 37.5 sq/ft for Boat and Pool Repair

  • This fiberglass cloth is a flexible fabric that wets-out transparently and is well suited to a wide range of lightweight, general purpose applications including laminating, reinforcing and sheathing / waterproofing..
  • Provides Uniform Strength Horizontally and Vertically This six ounce cloth is 3.9 mils thick.
  • Compatible with Epoxy, Polyester and Vinylester Resin.
  • Often Used on Surfboards, Sailboats and Cedar StripCanoes.
  • This 6 oz. cloth is the standard “E” glass volan-finished boat cloth Style 3733.
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ... materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/205 Fast Hardener has excellent bonding and coating properties. The West System 205 Fast Hardener is formulated to cure well at temperatures as low as 40-degree-F.
Check Stock

Fiberglass Cloth 6 Ounce by 60 Inches Wide - 10 Yards Rolled- 150 sq/ft for Boat and Pool Repair

  • This fiberglass cloth is a flexible fabric that wets-out transparently and is well suited to a wide range of lightweight, general purpose applications including laminating, reinforcing and sheathing / waterproofing..
  • Provides Uniform Strength Horizontally and Vertically This six ounce cloth is 3.9 mils thick.
  • Compatible with Epoxy, Polyester and Vinylester Resin.
  • Often Used on Surfboards, Sailboats and Cedar Strip Canoes.
  • This 6 oz. cloth is the standard “E” glass volan-finished boat cloth Style 3733.
Check Stock

Bubujia 13\ Fiberglass Fabric Cloth Mesh, 6 Oz. Fiberglass Mat Material Roll Woven Roving for Tub Shower Boat Pool Repair (164 Feet)

  • This fiberglass cloth is a flexible fabric that wets-out transparently and is well suited to a wide range of lightweight, general purpose applications including laminating, reinforcing and sheathing / waterproofing..
  • Provides Uniform Strength Horizontally and Vertically This 4 ounce cloth is 0.0059” thick.
  • Compatible with Epoxy, Polyester and Vinylester Resin.
  • Often Used on Surfboards, Sailboats and Cedar Strip Canoes.
  • This 4 oz. cloth is the standard “E” glass volan-finished cloth Style 1522.
Check Stock

Yikai Fiberglass Woven Roving Cloth (2.6 Oz, Plain Weave), 8.6\inch x 164'feet (22cm x 50m) Long for Boat & Pool Repair

  • This fiberglass cloth is a flexible fabric that wets-out transparently and is well suited to a wide range of lightweight, general purpose applications including laminating, reinforcing and sheathing / waterproofing..
  • Provides Uniform Strength Horizontally and Vertically This six ounce cloth is 3.9 mils thick.
  • Compatible with Epoxy, Polyester and Vinylester Resin.
  • Often Used on Surfboards, Sailboats and Cedar Strip Canoes.
  • This 6 oz. cloth is the standard “E” glass volan-finished boat cloth Style 3733.
Check Stock

Fiberglass Chopped Strand Mat Cloth 50' x 360' | 50 Inch Wide 10 Yard Long | 1.5 oz | CSM GRP | Molding Roofing Boat Marine Repair with E-Glass Fiber Roll | Resin Compatible | Rolled Package

  • ✅ Fiberglass Mat is the most commonly used reinforcement in composites.
  • ✅ Chopped Strand Mat is randomly dispersed fiber mat that has equal strength in every direction. Compatible with polyester and vinylester resin..
  • ✅ Conforms to tight curves and corners. It can be torn or cut to size..
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 207SA Special Clear Epoxy Hardener (10.6 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ... materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin/207 Special Clear Hardener Mixture, yet it wont drain from vertical surfaces like the very slow curing, low-viscosity ep....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 207SB Special Clear Epoxy Hardener (42.2 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ... materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin/207 Special Clear Hardener Mixture, yet it wont drain from vertical surfaces like the very slow curing, low-viscosity ep....
Check Stock

Bubujia 12\ Fiberglass Fabric Cloth Mesh, 2.6 Oz. Fiberglass Mat Material Roll Woven Roving for Tub Shower Boat Pool Repair (164 Feet)

  • Dimensions: 10.9 yard roll (32.8 feet) X 39.3 inches wide for an area of 108 sq. ft.
  • Excellent Features: The 9.5oz fiberglass cloth is popular for a wide range of lightweight applications like laminating, reinforcing, sheathing and waterproofing. It is a flexible fabric and it wets out transparently. Fiberglass mat is the most commonly used reinforcement in composites..
  • Well-proportioned: This fiberglass cloth pack provides a uniform strength horizontally and vertically..
  • General Repair: Fiberglass cloth is a smooth, lightweight cloth. And is often used on surfboards, sailboats, cedar strip canoes, or other applications including pool, automotive or marine repairs..
  • Universal Use: Compatible with Epoxy, Polyester and Vinylester Resin..
Check Stock

Mold Release | Stoner E236 Urethane Release (Case of 12 Aerosol Cans)

  • PARTALL Hi-Temp Wax is a premium multi-release mold release agent formulated from a blend of hydrocarbon and micro-crystal-line waxes and fortified with PTFE polymer.
  • It is particularly recommended for use with epoxies or phenolics or as part of mold-ing processes that cure and/or catalyze at higher temperatures (150 - 350 °F (65 - 177 °C)) when casting composites parts or molds from plugs..
  • may be used with most thermoset resins at ambient or elevated temperature cure, and is especially useful in applications where standard silicone waxes hinder post-finishing operations.
  • PARTALL Hi-Temp Wax has a creamy texture that makes for ease of application..
  • Use PARTALL Film #10 or PARTALL Coverall Film in conjunction with PARTALL Hi-Temp Wax to initialize new or reconditioned polyester or vinylester molds, or on molds that are particularly intricate or too expensive to risk demolding problems..
Check Stock

LET'S RESIN 30pcs Resin Jewelry Molds,Jewelry Molds for Resin Casting,Resin Silicone Molds kit with Bracelet Molds,Pendant Molds,Ring Molds for UV Resin,Epoxy Resin

  • LET'S RESIN Resin Jewelry Kit for Starter: jewelry molds kit comes with 3 x resin bracelet Molds.
  • 5 x resin ring molds and 50 x screw eye pins. Great variety of jewelry resin molds to save your time and money, especially suitable for beginners who are new to resin crafts..
  • Sturdy Resin Molds Silicone Kit: LET'S RESIN resin silicone molds are made by premium quality silicone material with excellent elasticity, superior high tear strength, and a glossy interior surface.
  • Jewelry Molds for Resin Casting – LET'S RESIN jewelry resin molds are compatible with many casting materials, especially good for epoxy resin, casting resin,uv resin,polymer clay not for coating resin.You just need to twist the silicone molds and release your creation out of the silicone resin molds after the resin is completely cured..
  • Resin Molds for Jewelry: Add some resin pigment, resin dye, and embed different kinds of embellishments or fillers, DIY your unique resin jewelry with our resin pendant molds for your friends and family..
  • 100% Satisfaction Guarantee: Don't hesitate to share your finished products wi....
Check Stock

FUNSHOWCASE Resin Ring Silicone Mold for Liquid Clay Crafting, Resin Epoxy, Jewelry Making 24-Count

  • Clear silicone molds. Create varied statement resin rings crafting projects ( novelty resin ring band, DIY resin ring base, wood resin ring, dandelion resin ring, flower resin ring, feather resin ring, gold flakes resin ring, nature resin ring, ocean resin ring, resin ring pair, rose petals resin ring, silver flakes resin ring, landscape inside resin rings ）.
  • DIY varied sizes resin ring jewelry making kit for girls, women, men. You can observe the manufacturing process clearly through these transparent molds..
  • Tips 1, Sanding after release 2 If you are between sizes, order up. Or you can always trim and drill the released product to properly fit your intended figure. Tips 2, You may add resin to mold with dropper..
  • For liquid clay, uv resin, epoxy resin, air clay, soap etc. crafting jewelry projects, you may always mix different materials when crafting, and use this silicone resin mold to make ring for pendant charm, or drill a tiny hole to make a earring.
  • Create personal resin rings with ease. Since the mold is reusable you can have many varieties and styles - save time, save mo....
Check Stock

Resin Color Pigment- 28 Colors Epoxy Resin Pigment, Resin Dye Liquid for UV Resin Color, High Transparent Epoxy Color Pigment Tint, UV Epoxy Resin Color Pigment

  • ღ【Resin Color Pigment 28 Colors】All the colors pf epoxy resin pigment are the transparent(white color is translucent), you can mix the resin color pigment white color with other colors to achieve Transparently . Feel free to blend epoxy resin pigment with epoxy resin and UV resin both will get the best color effect!.
  • ღ【Transparent Resin Dye Tint】 The resin dye mix well into the epoxy resin, Just need a few drops and you will be surprised by the color effect. You can freely control the intensity of the color, slowly adding one drop at a time until the desired color is obtained, Can also mix with another epoxy color pigment colorant to achieve the desired color..
  • ღ【Suitable For Epoxy Resin Color Pigment】 This epoxy resin color pigment can be widely used on resin jewelry, such as epoxy resin art, resin petri dish making, resin painting, resin coasters, tumbler making..
  • ღ【SIMPLE TO USE】 With a specially designed nozzle, the transparent and soft bottle can easily squeeze the epoxy resin paint from the bottle, and you can easily control epoxy dye dosage..
  • ღ【Safety & Multipurpose】: Our resin pigment liquid is odorless, non-toxic and non-irritating, each resin colorant 0.35oz/10ml, epoxy resin dye is perfectly suited for resin ....
Check Stock