Categories

Best Viscosity And Adhesion

KILZ Adhesion Primer, Interior/Exterior, 1 Gallon

  • ... range of surfaces. Use on properly prepared surfaces free of dust, grease, chalk, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray..
  • KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere. Viscosity - 93 - 100 KU. Roller - Smooth Surface - 3/8 - 1/2 inch nap.Roller - Porous Surface - 1/2 - 3/4 inch nap. Spray Pressure - 2,500 - 3,200. Spray Tip -.015 - .021 inches.
  • Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint..
  • Use on most interior and exterior surfaces where a secure bond is critical. This problem solving primer can be used under epoxies, lacquers, and products containing Xylene or other solvents. KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour..
  • This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white. Covers approximately 300 square feet per gallon. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend Rankings..
Check Stock

U.S. Art Supply Gloss Pouring Effects Medium - 32-Ounce/Quart

  • U.S. Art Supply Pouring Effects Medium - Is a Clear Gloss Medium with Acrylic Polymers that enable the artists to adjust their Acrylic Paint Viscosity to create amazing Poured Sheets, Puddles, Cells, and smooth flowing applications of color. 32-Ounce / Quart.
  • Liquid pouring medium, perfect for artists and hobbyists to create acrylic art. Gives you the artists the ability to create rich, vibrant pours with this fluid pouring medium with Reduced Crazing.
  • Adjusts the viscosity of Acrylic paint to the ideal consistency for creating cell effects, and reduced cracking and crazing.
  • Mix with acrylics and fluid acrylics Pigments to create stunning effects on canvas, wood, or other art surfaces.
  • Will not slow down the drying time, alter the color, or lessen the adhesion of paint. non-toxic and safe.
Check Stock

Capelli Lucenti 100g 7200 Pcs Italian Keratin Clear Granule Beads Hair Extension Keratin Glue Granule Pellet Granule Bead Hot Fusion Extensions Hot Melt Keratin Glue Tips for Hair Extension

  • ✅ PACKAGE: The package includes 1 box of 100 g hair extension keratin glue granules, which contains about 7200 pieces. They can be applied with fusion iron connector, hair extension iron, pre-bonding hair, good for hair extension or nail extension, the abundant quantity is enough for you to use and replace.
  • ✅ CAN BE USE: Can be used to bonding extensions and make micro link extensions, hot melt keratin glue tip is good viscosity resin, with strong adhesion effect..
  • ✅ STRONG AND SAFE: This hot keratin glue tip is a good viscosity resin, with a strong adhesion effect, there is no carbonation in continuous use, aging resistance, less wire drawing, no odor..
  • ✅ EXCELLENT PERFORMANCE: These granule beads are made from quality EVA, which is safe for use on the hair, they can melt and flow at high temperatures of 270 to 340 degrees Fahrenheit, you can use our product to create various hairstyles..
  • ✅ VARIETY USAGE: These granule beads are good for bonding heat-sensitive materials, not only can be applied for grafted wigs, but also for manual, accessories, shoes, wood products, ceramics, toys, cardboard boxes, and more..
Check Stock

6 Pieces Pinstripe Tape Vinyl Masking Tape Blue Painters Tape High Temperature Low Tack Automotive Car Paint, 1/16 Inch, 1/8 Inch, 1/4 Inch for Easy Removal Trim Thin Finishing Masking

  • Quality material: our artist masking tape is made of vinyl material, waterproof and reliable, safe and long-lasting, which can serve you for a long time, thus you can apply it with confidence.
  • Proper adhesion: the masking tape is adhesive with the characteristics of heat resistance and ductility, which can be bent and has sufficient adhesion to closely fit the object in use, so as to keep the edges clearly and distinctly.
  • Suitable size: the widths of the painters tape contains 3 sizes, including 1/16 inch, 1/8 inch, and 1/ 4 inch, suitable for edge locations, such as customized car and motorcycle paint graphics, narrow mask curves, etc..
  • You can choose the appropriate width for operation and pasting to help you achieve the desired effect.
  • Sufficient quantity: there are 6 pieces of low-viscosity artist tapes in the package, enough for you to make various designs and apply on more occasions, and the bright blue color makes them attractive and delicate.
  • Leaving no traces: due to low viscosity, the thin masking tape can withstand high temperatures and would not leave any residue or mark after removing, clean and tidy, which can save your time and energy on cleaning up glue marks.
Check Stock

EDSRDXS UV Bonding & Welding Glue Kit UV Super Bonding Soft & Hard Glue with Black Light, Quick-Drying for Bonding Glass, Metal, Plastic 2 Pack Each 0.7oz (20ml x 2pack)

  • LIQUID PLASTIC BONDING KIT：EDSRDXS UV bonding glue contains two selected bonding function UV glue (soft & hard), each of which is 0.7 oz, 20ml. It is a low-viscosity, high-strength and UV-curable modified acrylate adhesive..
  • UV super bonding soft glue can still maintain a certain degree of toughness (can maintain a small degree of bending) after bonding. It is specially used for laminating PC, PMMA, PET, PS (excluding PP), and is also suitable for laminating plastic, glass, and metal. combine. UV super viscous hand feeling glue has a viscosity of 450-550 CPS and is a colorless transparent liquid. It can withstand extreme temperatures from -22°F to 275°F (-30°C to 135°C). Under pen light, it cures within 30-40 seconds and remains transparent, never yellowing..
  • UV super bonding hard glue is transparent light yellow liquid, excellent for bonding between glass and metal, glass and glass. It has a special engineering viscosity of 300 to 400 CPS, which provides better adhesion on relatively narrow fracture surfaces. This glue can work at extreme temperatures ranging from -40°F to 194°F (-40°C to 90°C). It can be cured within 60s under the irradiation of....
Check Stock

Kitchen & Bath Caulk Tape Sealant Strip, 1.5''x10.5FT PVC Self Adhesive Waterproof Caulking Tape, Decorative Caulk Sealant Tape for Kitchen Sink Toilet Bathroom Shower Bathtub Edge Protector

  • 【Widely Use】Self-adhesive caulking tape used to kitchen bathroom sealant prevent water from seeping into the gas stove, cooktop, sink, toilet, washbasins, bathtubs, window, floor, etc, help keep the house clean and tidy for a long time..
  • 【Material and Size】38mm (width) x 3.2 m (length) caulk tape self adhesive caulk strip, made of high-quality PVC material, has stronger viscosity and adhesion than traditional PE self-adhesive tape, waterproof, oil-proof, environmentally friendly and floor tile adhesive..
  • 【Easy to Use】You can cut the bathtub sealing tape as needed. Just peel off the backing protective film and firmly press the sealing sealant tape on the surface. Stick to a hair dryer, and keep it dry for 12 hours. Easy to apply, convenient and save time..
  • 【Flexible Design】Waterproof flexible PVC bath sealant with crease design can be folded to 90 degrees to tightly seal the joints between walls. To know more about the cutting method of applying at corner or right angle, please refer to the following product description..
  • 【Warm Reminder】Before use, please clean and dry the surface.
  • Heating the glue with a hair dryer can improve the viscosity of the caulking strip. Caulking tool package includes: 1 caulking tape + 1 adhesion promoter..
Check Stock

Geeetech JT16 PVP Solid Glue Stick, 6pcs/Set,36g,for 3D Printer Hot Bed,Quick Dry,Easy to Stick and Washable,Green Tube

  • ...nd Durable】Designed for all 3D printer enthusiasts, it overcomes warping issues in 3D printing, helps 3D printed parts stick to the build plate during printing, and makes the finished model easy to release. High-capacity and reusable, enabling multiple prints with minimal usage..
  • 【Excellent Adhesion】Solid form viscosity, high viscosity formulation, good adhesion to all surfaces and impermeability. Very stable after pasting, wrinkle-free and smooth bottom. Its water solubility, dispersion stability and thickening properties can make up for various shortcomings of liquid glue and PVA glue. Leading the way in advanced adhesives in the 3D printing industry, gradually becoming a must-have for 3D printing..
  • 【Easy To Use And Clean】Swivel bottom design, lightweight and portable, easy to use and store. Simply apply the glue lightly to the active print area without covering the entire surface. This solid glue stick spreads smoothly and dries quickly. After drying, it can be washed with water or wiped off with a towel..
  • 【Wide Compatibility】Compatible with almost all 3D printer heated beds, suitable for any DIY or craft project, enough for everyday needs. It is recommended to close the cap after each use to prevent the glue from drying out..
Check Stock

WAKEFIELD SOLUTIONS 19755-XL-AB HEAT SINK, ES RECTANGLE EXTRUSION

  • PROTECT & PRESERVE: In addition to its glue-type purposes, the hot melt liquid functions perfectly for sealing and securing lidding film to hard plastic or paperboard containers and trays.
  • SEMI-PERMANENT ADHESIVE: Designed to last, the semi-permanent heat activated adhesive is conveniently removeable without messy residue even after long-term use to easily pull the film from the container.
  • COMMERCIAL GRADE CAPABILITIES: Maintain and create high-quality projects with the durable and tamper evident torque heat seal through gravure-style application.
  • CONTROLLABLE FLOW: Low-viscosity material encourages improved application control for clean results in any project involving hot melt lidding adhesion.
  • EASY TO USE: Simply heat the hot melt adhesion element to the recommended temperature and apply to appropriate project components for a clean and professional seal.
Check Stock

Rust-Oleum Stops Rust Satin Black Oil-Based Protective Paint 1 qt. Exterior and Interior - Total Qty: 2

  • ... range of surfaces. Use on properly prepared surfaces free of dust, grease, chalk, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray..
  • KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere. Viscosity - 93 - 100 KU. Roller - Smooth Surface - 3/8 - 1/2 inch nap.Roller - Porous Surface - 1/2 - 3/4 inch nap. Spray Pressure - 2,500 - 3,200. Spray Tip -.015 - .021 inches.
  • Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint..
  • Use on most interior and exterior surfaces where a secure bond is critical. This problem solving primer can be used under epoxies, lacquers, and products containing Xylene or other solvents. KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour..
  • This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white. Covers approximately 300 square feet per gallon. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend Rankings..
Check Stock

DTM 2.1 voc White Urethane Primer & Sealer gallon kit, 4:1 mix SS-2000W/SMR-222

  • Promotes adhesion and improves bond integrity.
  • Low viscosity, one component enables easy application.
  • Best for anodized aluminum, steel and galvanized metal.
Check Stock

Quicksilver 80W-90 Premium Gear Lube - Marine Engine - 32 Ounce

  • Formulated to protect against corrosion and excessive wear.
  • Improved emulsifiers protect gears should water enter the gear housing.
  • Designed for outboard applications below 75 HP.
  • Special additives protect gears from metal to metal contact.Exclusive formulation helps improve film adhesion to gears.
Check Stock

Quicksilver 80W-90 Premium Gear Lube - Marine Engine - 9 Ounce

  • Formulated to protect against corrosion and excessive wear.
  • Improved emulsifiers protect gears should water enter the gear housing.
  • Designed for outboard applications below 75 HP.
  • Special additives protect gears from metal to metal contact.Exclusive formulation helps improve film adhesion to gears.
Check Stock

BONDiT A-43 Adhesion Promoter, Primer, Adhesive, 2 oz. Bottle

  • General purpose primer and adhesion promoter for injection molding to metal and glass with polyethylene, polypropylene and polyolefins..
  • A one-part, one coat, thin film when cured..
  • Cure is ambient 30 to 60 minutes, or 75°C for 15 minutes, or 150°C (302°F) for 5 minutes..
  • Viscosity @ 25°C, ASTM D445 4.5-8.5 cps..
Check Stock