Categories

Best Viscosity In Coating

West System 105A Epoxy Resin (32 fl oz) Bundle with 206A Slow Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105A Epoxy Resin (32 fl oz), 206A Slow Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used ....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105B Epoxy Resin (126.6 fl oz), 206B Slow Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is....
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 207SA Special Clear Epoxy Hardener (10.6 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105A Epoxy Resin (32 fl oz), 207SA Special Clear Epoxy Hardener (10.6 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 207SB Special Clear Epoxy Hardener (42.2 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105A Epoxy Resin (32 fl oz), 207SB Special Clear Epoxy Hardener (42.2 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
Check Stock

Dicor RP-RRK-30 RV Roof Renew Kit

  • Includes four Gallons of Dicor White Acrylic Roof Coating, two quarts of Dicor Cleaner/ Activator, one 4 inch x 50 feet Roll Coating Ready Cover Tape, one Metal Pan, one 9 inch Paint Roller, two 9 inch Roller Covers, one roll 1 inch Masking Tape.
  • Each kit comes with a warranty and easy to follow instructions.
  • A polyester fleeced-back seam sealing tape for sealing cracks or tears in EPDM rubber or TPO RV roofing.
  • Individual components can be purchased separately.
  • Cleaner Activator: A low viscosity, pinkish liquid that chemically alters the EPDM surface to which it is applied creating a lock and key effect with the subsequent two coats of ACRYLIC COATING..
Check Stock

Grow Automotive W1370-1 Urethane Reducer Med. Gallon

  • Restoration Shop / Custom Shop Medium - Urethane Reducer - XR70 is a Mid temperature Paint Reducer for 70 - 85 degrees weather - XR70 has ZERO VOC for Compliance in all Low VOC areas.
  • Our premium quality Urethane Reducer is designed to be used with Restoration Shop and Custom Shop Acrylic Enamel, Acrylic Urethane, and Urethane Basecoat Automotive Paints, Primers and Clearcoat systems.
  • Our Urethane Reducer may also be used to reduce the viscosity in any of Restoration Shop's urethane primers, epoxy primers and urethane clearcoats..
  • XR70 Medium Teperature Urethane Reducer is Universal and may also be used to reduce the viscosity of many other Brands of urethane primers, epoxy primers and urethane clearcoats..
  • Restoration Shop and Custom Shop have been providing innovative Premium Quality products you can trust to the Automotive Paint Industry since 1974. Our products are proudly Made in the U.S.A., and we formulate, manufacture, and distribute our own products throughout the USA, unlike many competitors. Our superior coating products only use the highest quality ingredients, which allows our customers to consistently achieve professional high quality results on their Painting Projects!.
Check Stock

BEETRO HVLP Air Spray Gun 1.3/1.4/1.8mm Nozzle 1000ml Capacity 14.5CFM 30-43psi with 11 Filters 10pcs 190M Paint Strainers Air Control Valve 1/4 Connector and Type 2 Adapter

  • ...ating materials to the surface (up to 85%). With HVLP technology you also get a significant material savings, which is up to 30-40%.
  • Include 3 sets of stainless steel nozzle sets: The 1.3 mm and 1.4 mm nozzle sets are ideal for use with base coats, clear coats, single stage, primer-sealers, and other light to medium viscosity paint coating materials. The 1.8 mm nozzle set is ideal for primers, 2K primers, surfacers, and other medium to high viscosity paint coating materials.
  • No O-ring design, easy to clean with chemical agents and thinners. Super-precision external mix cap with filter for perfect pattern. Non-drip cup protects against paint wasting and ensures less mess, saving your time and money.
  • 3 adjustable knobs bring in concise painting: fluid control (needle adjust knob) regulates amount of paint sprayed, pattern control adjusts the fan pattern size, and air adjustment valve provides versatility to adjust air flow. Please always remember: THE MAX WORKING PRESSURE IS 3.0bar(43psi).
  • Can be used with WATER-BASED PAINT. Includes: Air spray gun equipped with 1.4mm nozzle, 1 set of 1.3mm nozzle, 1 set of 1.8mm nozzle, 1000ml aluminum cup*1, Spanner*1, Handle brush*1, 1/4” connector*1, Type 2 adapter *1, Plastic filter*11, 190M Paint Strainer*10, Air c....
Check Stock

West System 209-SB Extra Slow Hardener

  • 209 EXTRA SLOW HARDENER is a low-viscosity epoxy curing agent. It is useful in a majority of hot-weather bonding situations, and when very long working time and cure time are needed. 209 Extra Slow Hardener produces a slow epoxy cure that develops physical properties gradually at room temperature. It yields a rigid, high-strength moisture-vapor resistant and functionally waterproof solid..
  • USE WITH WEST SYSTEM 105 RESIN for general coating and bonding applications in extremely warm and/or humid conditions, and for extended working time at room temperature. Forms a clear, amber-colored solid with good physical properties and moisture resistance for bonding and coating applications..
  • PROVIDES ABOUT TWICE the working time of 206 Slow Hardener. 209's pot life at 72°F (22°C) is 40 to 50 minutes. Pot life at 95°F (35°C) is 15 to 20 minutes. Cures to a solid state at 72°F (22°C) in 20 to 24 hours. Cure to a solid state at 95°F (35°C) in 6 to 8 hours. Reaches maximum strength at 72°F in 4 to 9 days Minimum recommended working temperature is 70°F (21°C)..
  • PAIR WITH WEST SYSTEM 105-B Epoxy Resin. Blend with with WEST SYSTEM 105 Epoxy Resin at a 3-parts resin to 1-part hardener ratio..
  • EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to ....
Check Stock

Total Boat High Performance Epoxy Resin (Gallon)

  • Part 1 of a two-part, low-viscosity epoxy resin system that’s easy to use for clear coating, laminating, layups, and vacuum bagging. For use with non-blushing TotalBoat 2:1 Slow, Medium, and Fast Hardeners for curing in a wide range of times and temperatures..
  • Non-blushing formula means no time spent removing messy surface blush so projects can be finished faster. Low odor and low VOCs make it great for shop or indoor use..
  • Simple mix ratio of 2 parts resin to 1 part hardener makes it easy to get a proper cure every time, especially using TotalBoat 2:1 Pumps (sold separately)..
  • Use on properly prepared wood, fiberglass, aluminum, and steel. Clear, hard, flexible cure is great for clear coating and wooden boat building. Blend mixed epoxy resin with fillers to create a strong adhesive, fairing compound, or filleting compound..
  • Available in Quart, Gallon, and 4-Gallon sizes..
Check Stock

VOC Compliant Adhesive, 35LV, 1/2 pt.

  • Price For: Each Characteristics: Permanent Flexible Bond Over A Wide Variety Of Substrates Substrates: Virtually All Porous and Non-Porous Substrates Functional Cure: Solvent Evaporation, Can Be Thermoset Shear Strength: Greater Than=1200 PSI HP-131 Nitrile Item: VOC Compliant Adhesive Size: 1/2 pt. Work Life: Permanent Flexible Bond Green Environmental Attribute: RoHS Compliant.
  • VOC Content: 2.03 lb. per gallon (SCAQMD Rule 443/443.1) Application: Roll Coating, Knife Coating, Brushing Color: Tan Specific Gravity: 0.8895 Type: General Purpose, 35LV Viscosity: Brookfield RVT Spindle No. 3 @ 20 rpm 6500 +/-3500 cps Standards: Conforms to MMM-A-189 Type 3 Material: Nitrile Rubber, Phenolic Resin Bonding Range: 40 Degrees to 100 Degrees F Temp. Range: -30 Degrees to 325 Degrees F.
  • Country of Origin (subject to change): United States.
Check Stock

Restoration Shop / Custom Shop - UR70 Medium Urethane Reducer (Gallon) for Automotive Paint and Industrial Paint Use - High Performance Automotive Grade

  • Restoration Shop / Custom Shop Medium - Urethane Reducer - UR70 is a Mid temperature Paint Reducer for 70 - 85 degrees weather.
  • Our premium quality Urethane Reducer is designed to be used with Restoration Shop and Custom Shop Acrylic Enamel, Acrylic Urethane, and Urethane Basecoat Automotive Paints, Primers and Clearcoat systems.
  • Our Urethane Reducer may also be used to reduce the viscosity in any of Restoration Shop's urethane primers, epoxy primers and urethane clearcoats..
  • UR70 Medium Teperature Urethane Reducer is Universal and may also be used to reduce the viscosity of many other Brands of urethane primers, epoxy primers and urethane clearcoats..
  • Restoration Shop and Custom Shop have been providing innovative Premium Quality products you can trust to the Automotive Paint Industry since 1974. Our products are proudly Made in the U.S.A., and we formulate, manufacture, and distribute our own products throughout the USA, unlike many competitors. Our superior coating products only use the highest quality ingredients, which allows our customers to consistently achieve professional high quality results on their Painting Projects!.
Check Stock

Viscometer Adapter 0 Rotor for Digital Rotary Viscometer Viscosity Meter Tester, Low-Viscosity(0-20mPa.s) Liquids Test

  • 1.According to ASTM D 4212 (Standard Test Method for Viscosity Cup Immersion)standards.
  • 2.Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil..
  • 3.Viscosity is expressed in Zahn seconds which are correlated to viscosity in centistokes.
  • 4.Mainly in order to maintain the stability of the viscosity of the product in the process of use, so that the viscosity is always maintained at the set range to protect the color of the product effect..
Check Stock

Master Pro 44 Series High Performance HVLP Spray Gun Ultimate Kit with 4 Fluid Tip Sets 1.3, 1.4, 1.5 and 1.8mm and Air Pressure Regulator Gauge - Automotive Basecoats, Clearcoats, Primers Woodworking

  • ... Includes an MPS Adapter to use disposable cups..
  • 4 Fluid Tip Atomizing Set: The ultimate spray gun set-up to spray the lightest to heavy coatings, and all with the same gun. The 1.3 mm and 1.4 mm fluid tip set-ups are ideal for use with base coats, clear coats, single stage, primer sealers and other light to medium viscosity paint coating materials. The 1.5 mm and 1.8 mm size fluid tip set-ups are better for single stage topcoats, primers, 2K primers surfacers and other medium to high viscosity paint coating materials..
  • Superior Atomization Technology: Achieve perfect performance with all paint coatings because of the innovative technology in this spray guns needle, nozzle and air cap system. Paint coatings are fully atomized with the ideal fan pattern, so that they lay down perfectly for a clean even basecoat or topcoat finish. Premium performance with all types automotive, industrial, and woodworking coatings..
  • Waterborne Compatible: Precision engineered high grade stainless steel components that are 100% suitable for the latest automotive waterborne paint coatings..
  • Buy with confidence, if you’re not satisfied with this spray gun at anytime within the first year of purchase, we’ll provide a refund or replacement..
Check Stock