Best Voice Coil Parts - TopShopReview.com

Diamond Audio MP694 6 X 9 PRO Full-Range Co-Ax Horn Speaker

Ferrite Strontium High Temp Magnet structure.
1.5” 4 Ohm – Single Layer High Temp Voice Coil with Black Coated Voice Coil former for Woofer.
1.0” 8 Ohm – Single Layer High Temp Voice Coil for Tweeter.
Advanced Voice Coil Heat Sink Design for Better Heat Dissipation.

Max Power: 2400W Per Woofer RMS Power: 1200W Per Woofer.
Impedance: 4+4 Ohm Dual Voice Coil Voice Coil: 2.00" 4 Layer Voice Coil.
87.5dB EfficiencyOversaturated motor structure for increased magnetic strength 8mm top plate & vented t-yoke improves low-frequency dynamics.
Nickel-plated spring-loaded compression wire terminals High-temperature tolerance adhesives resist thermal failure.
poly-cotton suspension dampens violent accelerations stitched voice coil leads to prevent potential damage.

Overcompensating Motor Structure for Increased Magnetic Strength, 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics, Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up, Die-Cast Aluminum Heat Sink Dust Cap Absorbs Voice Coil Heat, Aluminum Dust Cap Fins Dissipate Heat & Strengthen Cone.
Non-Magnetic Non-Resonate Die-Cast Aluminum Frame, 2.5” 4-Layer Voice Coil w/ Large Gauge Wire Increases Power, High-Temperature Tolerance Adhesives Resist Thermal Failure, Nickel Plated 8ga Spring-Loaded Compression Wire Terminals, Non-Transfer Spruce Pulp Cone w/ UV & Chemical Protection.
High-Density Polyether Foam Surround w/ UV & Chemical Protection, Dual Poly-Cotton Suspension Dampen Violent Accelerations, Stitched Voice Coil Leads Prevent Potential Damage, 1-pc Gasket/Trim Ring w/ Concealed Mounting Holes Included.
Efficiency (1w/1m): 86.50, Voice Coil Configuration: 2.50″ Dual 4Ω, Motor Volume: 254oz Re: 7.230Ω Fs: 28.60Hz Qes: 0.416 Qms: 4.722 Qts: 0.383 Diameter: 12”.
Vas: 1.69ft3 Bl: 24.55tm Mms: 200.815g Cms: 152.013 Sen: 86.56db MAX Power: 2,500w RM....

Key components that you expect from T5 still remain.
big ass 1,000w 3” voice coil, triple-stack magnet structure, high-density Spruce pulp sub-cone, and the iconic black-on-black Soundstream spider..
Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics | Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up.
Non-magnetic non-resonate die-cast aluminum frame | 3” 4-layer voice coil w/ direct connect wire increases power handling | high-temperature tolerance adhesives resist thermal failure.
Extended excursion polyether foam Surround w/ UV & chemical protection | Dual poly-cotton Suspension dampen violent accelerations | 1-pc gasket/trim ring w/ concealed mounting holes included.
Max power (watts) 1, 800 | RMS power (watts) 900 | efficiency (1W/1M dB) 83.5Db | voice coil configuration 3″ dvc 4Ω.

Pair Rockville KPS80 8" 3-Way 800 Watt Karaoke Speakers with Wall Brackets and MDF Enclosure. Peak Power: 1600 Watts Per Pair (800 Watts Each). Program Power: 800 Watts Per Pair (400 Watts Each)..
RMS Power: 400 Watts Per Pair (200 Watts Each). 3-Way Speaker with Built-In 3-Way Crossover for Amazing Sound!. 8” Low Frequency Woofer With 1.37”, 100% Copper Voice Coil and 37 oz..
Ferrite Magnet. 3.85” High Frequency Tweeter With 3.5 oz. Magnet and 0.39" 100% Copper Voice Coil. 3.85” Mid-Range Speaker with 3.5 Oz magnet and 100% Copper Voice Coil Gives Amazing Sounding Voice..
Tweeter Is Made Of A Special Blend of Iron That Is Tuned To Sound Great For Voice and Music..
0.6” Inch Thick MDF Enclosure With Built-In Computer Tuned Port For Incredible Sound . Speaker Weight: 8.8 Lbs..
Each Woofer Has a Steel Basket OFC 100% Copper Voice Coils and a Paper Cone. Foam Surrounds for Great Sound Quality..
Aluminum Voice Coil Bobbin. Metal Speaker Grilles. Impedance: 8 Ohm. Sensitivity: 92 dB. Frequency Response: 60 Hz – 16 kHz..
Banana Speaker Terminals. Speakers Use Y30 High Grade Magnets. PTC Protection Circuitry Prevents against Blown Drivers..

6″ 4-Ohm Car Subwoofer. Peak Power Handling: 300 Watts. CEA Rated RMS Power Handling: 30 Watts 1″ High-Temperature CCAW Voice Coils Kapton Paper Wound with 100% Copper Wire. Voice coil with High-Quality Precision copper available in Kapton/ Aluminum heat sink, highly insulated with Methanol. Specially designed Woofer Cone for bass effect.
8oz High-Quality Magnet 4-Ohm Cast Steel Body with Pre-treated Woofer Frame which gives a beautiful finish and makes this Car Subwoofer Very Efficient. Kapton/Aluminum Heat sinks for proper Heat Dissipation and voltage Sustain Ability. This 6 Inch Subwoofer comprises of Foam Edge Cone/PP prepared for a crisp and soothing sound..
Cones Used for making this car audio subwoofers are Ultra-Stiff. They are thicker and stronger than other subs on the market making our woofers able to handle more power. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Highly flexible Spider/Damper used for accurate cone movement..
Foam Edge Cone/PP Reinforcement Ensures Long Life. Impedance: 4-Ohm Voice Coils. Low Carbon Forged Iron T-yoke and washers with approved Y-30 Ferrite Magnet Enhances Heat Dissipation in subs. Advanced Air Flow Cooling System..
5 Core uses highly adhesive in the assembly of the Speake....

Subwoofer Size: 12" | 2” black anodized aluminum vented voice coil former | High-temp TIL voice coil former.
Lightweight cone for increased efficiency | Improved suspension & coil design for PR-V2 models | Tough rubber top gasket.
High-strength wide roll surround | Single Voice Coil.
Power Handling: 250 Watts RMS | Peak: 500 Watts RMS.