Categories

Best Voltage Isolators

MaySpare 12V 140Amp Voltage Sensitive Relay VSR Double Battery Automatic Charging Relay Dual Smart Battery Isolator

  • 12V, 140A, 13.3V cut-in voltage, 12.8V cut-out voltage,.
  • Package Include All the Bits and Pieces Needed for a Complete Installation.
  • Working Voltage: Having Voltage Sensitive Chip,Rely Cuts in at 13.3 Volts and Cuts out at 12.8 Volts to Ensuring Primary Battery is Always Ready for Vehicle to Run..
  • Fuction:Like Having Two Separate Power Sources,The Dual Battery Isolator Kit Enables Your Accessories to Run From a Separate Battery While the engine is not running on your vehicle While keeping your Main Battery Charged and Your Vehicle Always Ready to Go and Start When You Want It..
  • Compatibility: This battery isolators are small and suitable for almost anywhere, for ATV, UTV, Boats, RV's，marine vehicle, truck, caravan.
  • LIFETIME WARRANTY :100% High Quality and Enjoy Full Life Warranty, Free Exchange.
Check Stock

MaySpare 200 Amp Mobile Audio Continuous Relay and Battery Isolator High Current Relay 12VDC

  • Function: An isolator is used to combine two batteries when a alternator is charging ( engine running) and isolate them when not charging ( engine off) so you can still start your vehicle.
  • Voltage: 12VDC/ Dimensions: 2-3/8"W x 2-3/8"D x 3-3/4"H/Power Handling: Continuous power handling of 200 amps/ Surge Power Handling: 300 amps.
  • Advantage: Does not create a voltage drop to the second battery like conventional isolators.
  • Wrie Diagram : Connect the two small studs one to ground the other to an ignition on source from fuse box , the order on the large/ small studs does not matter.
  • 1 Year Warranty and Free Return and Refund.
Check Stock

NVX 500 Amp Mobile Audio Relay Battery Isolator

  • AMP BATTERY ISOLATOR. Great for isolating the second battery to be dedicated to your sound system.
  • UNCONVENTIONAL ISOLATOR. Doesn't create a voltage drop to your second battery unlike common isolators do.
  • POWER HANDLING. Continuous power handling of 500 amps at 12V and surge power handling of 700 amps.
  • PRIMARY BATTERY SAVER. Lengthens the life of the primary battery when your vehicle engine is off.
  • ELIMINATES BATTERY DRAIN. It helps eliminate multiple battery drain as it stops battery bank from getting power from each one.
Check Stock

NATGAI Steel Spring Hanger Vibration Isolator for A/C Air Handler Bedroom Theater Studio, 110 Lb Capacity, 1.20\ Deflection

  • High Quality: By using 3mm thick steel, high quality spring and silicon material, this product provides high efficiency in absorbing vibration, it is fully matched to requirements of interior decoration..
  • Specification: 100mm*45mm*50mm or 4''*1.8''*2''.
  • Weight: 0.4kg. Material: steel & rubber. Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 24 inch, e.g. 63~99 isolators are needed for a room aera of 215~322 sq ft.
  • Easy To Install: The base has 1 bolt hole on base for rigid mounting when used for supporting machinery, easy installation on ceilings, floors, walls, ducts, etc..
  • Wide Application: : The shock absorber can be used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room etc. Can be mounted to ceilings, walls, pumps..
  • Package Included: 4 x 110 Lb capacity spring vibration isolators.
Check Stock

ButtKicker BK-CMAK Couch/Chair Mounting Accessory Kit

  • Easy-to-use kit simplifies installation of your ButtKicker LFE.
  • Allows ButtKicker LFE to be placed simply and securely on whatever furniture you are going to be using.
  • Attaches directly to the leg of your couch or chair, while sitting on rubber isolators.
  • Includes five additional rubber isolators, drastically improving the performance of your ButtKicker LFE.
  • Kit comes with all the necessary mounting hardware, and a handy wrench.
Check Stock

DC 4~20mA Signal Isolator, Module Signal Transmitter Conditioner Signal Converter(One in two out, 0-10V)

  • High-quality materials: The signal isolators are made of high-quality materials, which are sturdy, durable and have a long service life..
  • Technology: The signal transmitter adopts automatic compensation technology to achieve a temperature drift of less than 25ppm..
  • Function: The signal converter is used to protect the circuit board and related equipment from environmental erosion..
  • Features: The optoelectronic isolator has the characteristics of good stability, high isolation voltage, fast transmission speed, fast response, and high power carrying capacity..
  • Application: The DC signal isolator is resistant to high frequency interference, applicable to a wider environment, and very practical..
Check Stock

MAOPINER 4Pack Ceiling Vibration Damping Mounts, Spring Vibration Isolator for Soundproof and Shockproof for A/C Air Handler Bedroom Theater Studio, 110 Lb Capacity, 1.20\ Deflection

  • Premium Material: The red part of the ceiling vibration damping mounts is made of silicon instead of rubber, better functioning in absorbing vibration. And also the silicon applied is qualified, safe and environmentally friendly material..
  • Specification: 100mm*45mm*50mm or 4''*1.8''*2''.
  • Weight: 0.4kg. Material: steel & rubber. Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 24 inch, e.g. 63~99 isolators are needed for a room aera of 215~322 sq ft.
  • Easy To Install: The base of the mechanical vibration damping pads has 1 bolt hole on base for rigid mounting when used for supporting machinery, easy installation on ceilings, floors, walls, ducts, etc..
  • Wide Application: : The shock absorber can be used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room etc. Can be mounted to ceilings, walls, pumps..
  • Package Included: 4 x 110 Lb capacity spring vibration isolators.
Check Stock

MuHize Black D-Ring Shackle Cover 2 Pcs Shackle Isolator and 4 Pcs Washer, Isolators Washers Kit Fits 3/4 inch Shackle Gear Design Rattling Protection (Pack of 2)

  • PACKAGE INCLUDED - MuHize 2Pcs black D-ring shackle isolators + 4 Pcs black washers kit. Perfect fit for standard 0.75" or 3/4" D-Rings or Shackles with 7/8" screw pin..
  • EASIEST DIY FOR BUMPER - The shackle isolators and washers are one of the DIY necessities of the off-road trail or everyday driving. The quality shackle isolators can both protect Wrangler or pickup bumper finishes from damage and make it look cool after DIY modification..
  • EASY TO INSTALL - No Screws or drilling are required. And the washers can reduce rattling noise when the vehicle is in motion..
  • DURABLE MATERIAL - MuHize isolator & washers are specific for durable rubber material, which can prevent shackles from crack, warp or corrode effectively..
  • HIGH QUALITY - Perfect bending can be matched with 3/4 inch D-ring shackle. Accurate design. It can be used as a buffer to effectively protect the bumper..
Check Stock

Dual Battery Isolator Kit 12V 140Amp, Voltage Sensitive Relay VSR,Compatible with RV Marine Car Vehicles Truck Caravan Off-road Camper Yacht，Not Fit for lithium batteries

  • 【Wide Compatibility】——This battery isolators are small and suitable for almost anywhere, for ATV, UTV, Boats, RV's，marine vehicle, truck, caravan.
  • 【Working Voltage】——Voltage Sensitive Relay (VSR) cuts in at 13.3 volts and cuts out at 12.8 volts to ensure your primary battery is always charged and ready to run your vehicle.
  • 【Function】——With the engine running the VSR will engage when the starting battery reaches 13.3 Volts and the LED light will illuminate. This means that both batteries are now linked and the system is working.Once you turn off your vehicle the system will disengage the two batteries as it reaches 12.8 Volts,leaving your main battery safe to start again.
  • 【Important Note】——When connecting accessories to your second battery ensure they are fused within 0.98FT.
  • 【12-MONTH Warranty】——We have exquisite craft, strict quality control along with excellent after-sales service. That is why our products are worthy of your purchase.
Check Stock

Topping HS01 USB 2.0 High Speed Audio Isolator Compatible with PCM32bit 768kHz DSD512 withstands up to 1kVRMS

  • Leading innovation - Previous isolators were limited to Full Speed (12 MBit/s) and Low Speed (1.5 MBit/s) transmission. This product is capable of....
  • USB2.0 High Speed - HS01 supports USB2.0 High Speed transmission, which is compatible with high-resolution audio transmission such as PCM32bit/768kHz....
  • Low latency - The latency is only 0.29us, which fully meets hifi and professional applications' needs. Note: Generally, the latency of USB device is....
  • Galvanic Isolation - This product is an ideal solution to break ground loops, avoid noise coupling and protect ports from power surges and voltage....
  • Precautions - When the device connected to HS01 exceeds the current output capability, an external auxiliary power supply can be used. Please note....
Check Stock

GearAmerica UBER Shackle Isolators – Only for GA UBER Shackles Will Not Fit a 3/4 D Ring – Helps Prevent Corrosion and Protect Finish – Reduces Noise and Rattling – 2 Pack

  • Keep Your Equipment Safe: Protects your vehicle and your Mega Shackles from scrapes, dings and scuffs and prevents corrosion.
  • Silence Rattle Noise: Our isolators work wonders to eliminate rattle noise while keeping your bumper safe.
  • Exclusively Fits GearAmerica Mega Shackles : These isolators are the perfect functional complement to our bold, virtually unbreakable GearAmerica Mega....
  • Purchase with Confidence: All GearAmerica products include our industry-leading Hassle-Free Lifetime Replacement Warranty.
  • If You Love the Open Road, Join Us: Our mission is to advocate and live a lifestyle of freedom, with respect for nature & machinery, that’s why....
Check Stock

Studio Monitor Isolation Pads - Suitable for 6.5'- 8' inch Speakers - Large Speaker Isolation Pads Fit Most Desktops - High-Density Acoustic isolation Foam - Angled Speaker Foam Stand - 2 Speaker Pads

  • Speaker isolation pads size 10.4 x 13 x 1.6 Inches (W x D x H). Speaker foam is designed to fit with the most popular 6.5″ – 8″ Large monitors.
  • Speaker platform high-density acoustic isolation foam for professional use (50kg/m^3 density)..
  • Angled speaker stand two-component design, monitor isolators allow 5 different angle configurations..
  • Speaker stand desk generates cleaner, more precise sound by reducing vibrations and low-end distortion..
  • Subwoofer sound isolation pads keep your studio’s desktop clean look with no logo on the front of the monitor isolators.
Check Stock

Mono-gatari 4Pcs Spring Vibration Isolator Ceiling Vibration Damping Mounts Anti Vibration Ceiling Suspended Mounted with Removable Frame for A/C Air Handler Bedroom Theater Studio 110 Lb Capacity

  • 【Damping Structure】The red part is made of unique damping silica, better functioning in absorbing vibration, especially for places with subwoofers in entertainment venues..
  • 【High Quality】Vibration damping mounts is composed of 3mm thick steel spring, damping silicone layer, outer frame. Silicon applied is environmentally friendly material..
  • 【Specification】Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 23.6 inch. E.g. 63~99 isolators are needed for a room aera of 215~322 sq ft..
  • 【Easy Installation】Anti vibration isolator spring is designed with a 5/16 inch (M8) pre-drilled bolt hole, easy installation on ceilings, floors, walls, ducts, HAVC, etc..
  • 【Wide Application】Anti vibration ceiling suspended mounted is widely used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room, TV stations, concert halls, etc..
Check Stock