Categories

Best Voltage Tester For Dc Voltage

Extech MN24-KIT Electrical Test Kit

  • MN24 Digital Multimeter with large, easy to read display measures AC/DC Voltage, DC Current, Resistance, and Continuity and features Diode and Battery tests.
  • Included 40130 Non Contact Voltage Detector detects AC Voltage from 100VAC to 600VAC with a Flashing LED and Audible beeper.
  • Included ET15 Receptacle Tester tests for faulty wiring in 3 wire outlets with a standard North American 3 prong Plug.
  • Everything you need to stay safe and work smart on DIY home electrical projects.
  • The MN24 KIT includes the MN24 Digital Multimeter, Multimeter Test Leads, 40130 Non Contact Voltage Detector, ET15 Receptacle Tester, Storage Case.
Check Stock

Klein Tools 81021 Electrical Tester Tool Kit with Multimeter Non-Contact Voltage Pen Receptacle Tester Wire Stripper / Cutter 4-Piece

  • ELECTRICAL TESTER TOOL KIT includes Multimeter, Non-Contact Volt Tester Pen, Receptacle Tester, and Wire Stripper and Cutter.
  • MANUAL-RANGING DIGITAL MULTIMETER measures AC/DC voltage, DC current and resistance (Cat. No. MM300).
  • NON-CONTACT VOLTAGE TESTER PEN provides non-contact detection of voltage 50 to 1000V (Cat. No. NCVT1P).
  • CAT IV 1000V SAFETY RATING provides expanded operation and protection (Cat. No. NCVT1P).
  • RECEPTACLE TESTER detects wiring configurations and indicates correct wiring, and identifies common wiring faults (Cat. No. RT105).
Check Stock

ANCEL PB100 Automotive 12/24V Power Circuit Tester Probe with ANCEL BA201 Car 12V 100-2000 CCA Battery Load Tester

  • Includes: 1 x PB100 Circuit Tester, 1x BA201 Battery Tester.
  • A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
  • 4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
  • AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
  • Resistance mode for reading the resistance between the tip and auxiliary ground lead.
  • Diode mode for checking forward bias or reverse bias..
  • Easy to check the cranking and charging system condition. Cranking test displays cranking time, voltage and status, which helps you test and analyze the starting motor to check it works properly or not. Charging test displays load voltage, unloaded voltage, ripple status, charging system status to avoid damaging the battery and shortening its life greatly due to overcharging or incomplete charging..
  • Monitors the real-time voltage through the Waveform graph, displays current voltage, maximum and minimum voltage during ignition. According to analyze the values of discharge voltage, starting voltage, and cha....
Check Stock

ANCEL PB100 Automotive 12/24V Power Circuit Tester Probe with ANCEL BA301 6V 12V Battery Load Tester Car Cranking Charging System Test Tool

  • Includes: 1 x PB100 Circuit Tester, 1x BA301 Battery Tester.
  • A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
  • 4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
  • AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
  • Resistance mode for reading the resistance between the tip and auxiliary ground lead.
  • Diode mode for checking forward bias or reverse bias..
  • Works on all 6V & 12V 100 - 2000 CCA lead-acid batteries, analyzes starter cranking and alternator charging condition. Cranking test to test and analyze the starting motor (cranking time, voltage, and status), and the charging test to check and analyze the charging system (load voltage, unloaded voltage, ripple status, charging system status)..
  • Features one-click "waveform" to record the voltage changes (current voltage, maximum and minimum voltage) in a graph during ignition. You'll know if the battery needs to be replaced or not through analyzing the values of discharge voltage, starting voltage, and ch....
Check Stock

Neoteck Electrical Test Kit, Mini Digital Multimeter + Receptacle Outlet Tester + Non-Contact 12-1000V AC Voltage Detector Pen- Great Packs!

  • 【Electrical Test Kit】Comes with a Mini 1999 Count Digital Multimeter, Non-Contact 12-1000V AC Voltage Detector, and a Receptacle Tester to Meet Most Electronic Testing Needs, Ideal for Laboratory, Education, Factory, Workshop, Household Use.
  • 【Mini Multimeter】Multi-functional Tester with Backlit LCD Display, Also Comes with with Pair Test Lead, Accurately Measures AC/DC Voltage, DC Current, Resistance, and More, Recommended by Many Professionals Engineers, CE Rated for Over Load Protection, Includes 9V Batteries Under Load.
  • 【Non-Contact Voltage Detector】 This Non-Contact Voltage Tester Detects AC Voltage within 12-1000V AC, Distinguish the Live Wire and Null Wire through Different Frequency Alarm Sound and Flashing Led Levels.
  • 【Standard US Receptacle Tester】Featuring Lights that Indicate Circuit Condition, Tests Standard & GFCI Sockets/ Outlets/ Receptacles for Proper Wiring (110-125V AC), Detect Five Different Wiring Faults: Open Ground, Open Neutral, Open Hot, Hot/ Ground Reverse, and Hot/ Neutral Reverse.
  • 【Wide Application】A Set of Quick Fix Tool, Perfect for Weekend Warriors, DIY Homeowner and Anyone just Learning How to Do This Type of Work, Helping You Evaluate the Outlets and Identify the Hot Wires in the Basement Testing, Durab....
Check Stock

ANCEL BST200 12V Car Battery Load Tester with ANCEL PB100 Automotive 12/24V Circuit Tester Probe

  • Includes: 1 x BST200 Battery Tester, 1x PB100 Circuit Tester.
  • Works on automotive 12V 100 - 1100 CCA lead-acid batteries, including regular flooded, AGM flat plate, AGM spiral, and GEL batteries for cars, SUV, motorcycle, light truck, and more..
  • Gives you an accurate result in only 3 seconds, such as CCA value, CCA rating, voltage, internal resistance, state of health, and state of charge, based on the rating standard of CCA, CA, MCA, JIS, DIN, IEC, EN and SAE..
  • A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
  • 4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
  • AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
  • Resistance mode for reading the resistance between the tip and auxiliary ground lead.
  • Diode mode for checking forward bias or reverse bias..
Check Stock

KNACRO Waterproof Monitor 3-Wires DC 0-600v 12v 24v 36v 72v 96v 120V 150V 240V 600V Volt Battery Meter Voltage Tester Automative Electric Cars Gauge Small Digital Voltmeter 0.52" Green LED Display

  • Installation size: 47.2x27.3mm x 22mm(depth).
  • Waterproof IPX8 tester is filled with waterproof glue inside, the battery voltage tester is waterproof grade IPX8,voltage meter will give you a real time voltage reading from your batteries. this multimeter can be used as battery voltage tester meter, battery capacity detector and temperature indicator panel for car, marine, RV, boat, etc.
Check Stock

Keeptop Non-Contact Voltage Tester - Electrical Tester with Dual Range AC 12 to 1000V, Live/Null Wire and Circuit Tester, Voltage Detector with Flashlight and Pocket Clip

  • Super Large LCD Screen -- Compared with other voltage testers, our screen is 6.6 larger than their testers, and the high resolution screen will show 3 test results, such as the volt, frequency and analog bar.
  • Non-Contact & 8 LED Indicators -- Non contact voltage detection ensures the safety of testing, and 8 LED Indicators in 3 colors display (Green, Yellow, Red) help to distinguish the detected voltage intensity easily.
  • Auto-ranging Digital Multimeter -- Designed for the novice. Plug the test leads only, the multimeter tester can smart to test voltage DC or AC frequency, resistance, as well as continuity.
  • Perfect Helper for Electrical Issues -- SUETTLA X1 Volatge tester arrive CAT II 600V safety level, help to detect the null/live wire, breakpoint locate, AC/DC volts testing, Ohm measure etc, to save the high service fees..
  • Fastest Reading Speed -- With upgraded chips, greatly increase the sensitivity, make the voltage multimeter tester measuring in 0.2s (5 times/s).
Check Stock

Greenlee - Electrical Kit Gfci Elec Test Instruments TK-30AGFI 10 x 8 x 3

  • Kit includes multimeter DM-25, non contact voltage detector, receptacle tester GT-10GFI and carrying case.
  • Multimeter measures AC/DC voltage up to 600V.
  • Non contact voltage detector safely detects AC voltage.
  • Receptacle tester ensures sockets are wired correctly with additional ground fault circuit Interrupter (GFCI) testing capability.
Check Stock

Autel PowerScan PS100 Power Circuit Probe Kit with 40ft Cable, 12V 24V Automotive Circuit Tester, Car Electrical Diagnostic Tool, AC DC Resistance Voltage, Short Finder, Continuity/Probe/Signal Test

  • 【2023 ALL-IN-ONE POWER CIRCUIT TESTER KIT---ACCURATELY】Autel PowerScan PS100 is most accurate power circuit probe tester yet, with 160x128 TFT display test all 6-30 volt vehicle electrical systems. Autel PS100 supports voltage&polarity test, continuity test, signal circuit test, components activate, check bad grounding, locate short circuits, circuit breaker protection, etc. Intuitive interface with ergonomic design makes PS100 be best gift for all novice drivers or pro circuit repairers..
  • 【FOUR WORKING MODE---INTUITIVE&EASY】Four working modes make circuit detection more simple:DC Voltage, AC Voltage, Resistance, Tone On/ Off. DC Voltage mode can read DC voltage with 0.1V resolution.
  • AC Voltage can read Max & Min voltage, frequency and duty cycle quickly.
  • Resistance mode can read resistance between tip and auxiliary ground wire. Unique Tone On/Off Design is really useful when working in bright areas, it can judge the circuit voltage according to the volume of the sound..
  • 【COMPONENT ACTIVATION】The component activation feature is specially designed to troubleshoot on/ off-board electrical equipment. By activating the signal generated by th....
Check Stock

Amprobe AT-8020 Advanced Industrial Wire Tracer Kit

  • 【FUNCTION UPGRADE】 KZYEE KM50 Circuit Tester Kit is an upgraded version of KM10, which performs each type of testing modes, like DC Voltage, AC Voltage, Signal Frequency, Duty Cycle, Fuel Injection, Resistance, and Diode.
  • 【QUICK DIAGNOSIS】Quicker troubleshoot and diagnose circuit conditions by switching waveform display from the digital display for AC Voltage, Frequency, Duty Cycle, and Fuel Inject testings by long-pressing the mode button for 3 seconds.
  • 【WIDELY APPLICATION】Works on 12V 100-2000CCA lead acid batteries , including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL and EFB. Also, it is suitable for cars, motorcycles, trucks, ATVs, SUVs, boats, yachts, mowers, and even golf carts and lawn tractors batteries.
  • 【CRANKING & CHARGING SYSTEM TEST】Presents you with the test results (actual cranking voltage & cranking time) of the starter system in milliseconds to indicate if the cranking system is working as expected. Also, the battery load tester conducts a throughout check on the 12V charging system to make sure a normal generator output，perfectly working rectifier diode and under controlled charging current.
  • 【SAFE PROTECTION DESIGN】The battery tester doesn’t emit light, heat or spark, and won’t discharge the battery. It ....
Check Stock

ANCEL BA101 12V 100-2000 CCA 220AH Automotive Battery Load Tester with ANCEL PB100 Circuit Probe Vehicle Diagnostic Volt Meter 12V/24V AC/DC Resistance Detector

  • Includes: 1x BA101 Battery Tester, 1x PB100 Circuit Tester.
  • Small compact design, fast scan and direct test results display are some of BA101’s benefits. It’s a simple and easy yet quick and accurate tool for analyzing the health of a 12V battery. It tells you everything about battery’s voltage, charge, cranking power, and how much life is left of it (level of Ohm resistance)..
  • It checks the alternator's charging and starter's cranking conditions. Vehicle charging system test is also available, including load voltage, unloaded voltage, ripple status and charging system status..
  • A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
  • 4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
  • AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
  • Resistance mode for reading the resistance between the tip and auxiliary ground lead.
  • Diode mode for checking forward bias or reverse bias..
Check Stock

Greenlee - Electrical Kit-Basic (Tk-30A), Elec Test Instruments (TK-30A), 10 x 8 x 3'

  • Kit includes multimeter DM-25, non contact voltage detector GT-11, receptacle tester GT-10 and carrying case.
  • Multimeter measures AC/DC voltage up to 600V.
  • Non contact voltage detector safely detects AC voltage.
  • Receptacle tester ensures sockets are wired correctly.
Check Stock