Aicevoos E9199 Car Battery Tester 12V 24V with Built-in Printer, 100-2000CCA Alternator Tester, Battery Tester Automotive Battery Load Tester Alternator Tester Battery Analyzer

  • ...ar flooded, AGM flat plate, AGM spiral, EFB batteries or gel batteries. Provides an overall analysis of battery health to help you understand battery status in advance..
  • SIMPLE OPERATION: This tester is designed and produced strictly according to IEC/EN61010-1 safety standard. Also, it reaches double insulation over-voltage standard CATⅢ 600V, equipped with a large backlit LCD screen, support classic buttons, help you read and operate more efficiently..
  • HIGH ACCURACY: It utilizes the 4-wire Kelvin method to complete the collection of a series of complicated data for calculating every testing data with a build-in precise circuit and improved digital processor. . Help you get accurate test results..
  • SAFETY FIRST: Battery tester including polar reversal protection, over-voltage input protection, and loose lead detection, ensure safety and convenience during testing..
  • NOTE: The voltage value will be higher than the normal situation due to the checked battery is fully charged after the vehicle runs for a while. Please turn on the headlights for 2 to 3 minutes, then check the battery when it’s voltage value drops to the normal value..
Check Stock

Bad Breath Tester Odor Breath Detector Professional Portable Bad Breath Analyzer Odor Monitor Tools for Oral Cavity Testing

  • The bad breath tester features a digital LCD screen and a backlit cartoon display. The test results will be displayed in numbers and cartoons. When you use the smell bad breath tester, it gives you accurate results based on the condition of your mouth with 0-4 levels.
  • Easy to use: Just press the power button for 1 second to start the bad breath detector, insert the 2AAA batteries (not included), turn on your smell bad breath tester, wait for 10 seconds (with countdown), then blow into the tester for 5 seconds, accurate results are displayed on the screen.
  • This bad breath tester uses advanced semiconductor sensors, which with fine sensitivity and fast responsibility, are simple and convenient to use. It can help you avoid embarrassing situations caused by bad breath, such as parties The bad breath detector features a digital LCD screen and a backlit cartoon display. The test results will be displayed in numbers and cartoons. When you use the smell bad breath tester, it gives you accurate results based on the condition of your mouth with 0-4 levels.
  • This bad breath monitor is small and easy to carry. Weight 30g, size 32 x 105....
Check Stock

Vertlley Heavy Duty 3-48V Test Light Digital LCD Backlight Display Circuit Tester with 140 Inch Extended Spring Wire Car Truck Vehicles Automotive Low Voltage Backlit with Voltmeter Stainless Probe

  • 【WIDE VOLTAGE RANGE】The voltage range that this light tester can detect is 3-48V. The circuit tester/circuit test light is widely used to check automotive circuits and other 3-48v DC wiring and circuits. This is also a test light with voltmeter..
  • 【HIGH-QUALITY AND HEAVY DUTY】The automotive test light is made of cellulose acetate. It is tougher and not easily broken than ordinary materials. This automotive circuit tester is larger and heavier than ordinary test lights on the market..
  • 【ACCURATE LCD DIGITAL DISPLAY】The 3-48 volt test light is equipped with a digital backlit LCD. The digital light tester can resolution to 0.1V voltage reading on blue/white back light LCD digital display, with high accuracy to 0.1V. This digital voltmeter is very convenient for checking or maintaining vehicles at night or in dark places. (Two back light colors are shipped randomly).
  • 【MORE CONVENIENT TO USE & CARRY】The 3-48v test light uses high-quality 140-inch (3.6m) PU spring wire with a large alligator clip. It is convenient to operate this tester light with one hand. This car fuse tester light is small in size and easy to carry around..
  • 【DURABLE INSULATION】This circuit tester is equipped with pure copper clips and insulating sleeves, which can better c....
Check Stock

Neoteck Voltage Tester/Non Contact Voltage Tester 12-1000V/48-1000V Adjustable Sensitivity AC Voltage Detector Tester Pen Live/Null Wire Tester with LCD Display Buzzer Alarm Wire Breakpoint Finder

  • 【CE CAT III600V RoHS Certificate Voltage Tester】 Neoteck professional AC voltage detector is safely double insulated. High Voltage Alert to warn you of voltage above 90V, the screen turn red and the safety symbol on the screen shines, perfectly suitable for DIY'ers, hobbyists and homeowners, which helps you make the First and the Most Important Safety Check.( Note Please:Not Suitable for Christmas Light Testing).
  • 【Dual Range Electrical Tester】The 2022 upgraded circuit tester’s default mode is 48-1000V(Low Sensitivity), press the ’’S’’ to switch to 12-1000V(High Sensitivity), which can meet standard and low voltage (12-1000V AC / 48-1000V AC) for more sensitive and flexible measurements. Also, it is easier to identify live and null wire when the wires are neighbouring..
  • 【Non-Contact Voltage Tester with LCD Display】With NCV inductive probe for AC voltage.
  • just place the tip near a terminal strip, outlet, or supply cord, which can tell live and null wire without safety problem. When the buzzer alarms slowly, light flashes slowly and LCD shows green, it is Null Wire. While the the buzzer alarms quickly, light flashes quickly and LCD shows red, it is live Wire..
  • 【Quick Break Point Testing】What’s more, this voltage tester pen can w....
Check Stock

Klein Tools 80092 Electrical Tester Kit and Inspection Kit with Circuit Breaker Finder, Voltage Tester, and Test Leads, 6-Piece

  • BEST SELLERS in convenient kit include three testers with leads for electrical test and measurement applications.
  • Digital Multimeter, Non-Contact Voltage Tester with Flashlight, and GFCI Receptacle Tester.
  • VARIETY OF FEATURES on the Digital Multimeter MM320 measures up to 600V AC/DC voltage, 10A DC current and 2MOhms resistance.
  • also tests batteries, diodes, and continuity.
  • DUAL-RANGE TESTING CAPABILITIES allow Voltage Tester NCVT3P to detect from 12 to 1000 VAC or 70 to 1000 VAC for a broad variety of low-voltage or standard voltage applications.
  • DETECT WIRING CONDITIONS on GFCI Receptacle Tester RT250 which features a large backlit LCD readout of voltage, and clear indication of wiring conditions, with patent pending detection of Open Neutral / Open Ground wiring faults.
  • CIRCUIT BREAKER FINDER quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected.
Check Stock

Pen Type Digital Multimeter - BTMETER BT-38C AC DC 600V High Voltage Tester 60M Ohm Resistance Meter with Capacitance Diode Test Continuity Alarm Backlit LCD Screen Lamp Light

  • ⚡MULTIFUNCTION PEN MULTIMETER - Voltage Tester accurately measures AC DC from 600mV~600V, resistance from 600 ohm ~ 60M ohm and capacitance, diode....
  • ⚡OVERLOAD PROTECTION - BT38C pen type digital multimeter features double insulation protection, CE 600V CAT Ⅲ. Compact and high precision....
  • ⚡DATA HOLD VOLTMETER - This pen multitester can hold the reading for you to record, Low battery indicator, Auto OFF with “Beep” warning after 15....
  • ⚡BACKLIT & FLASHLIGHT - Long press “HOLD” button on the pen multimeter to turn on bright flashlight and LCD screen backlit, Then you can....
  • ⚡100% MONEY BACK WARRANTY - BTMETER is backed by 100% guarantee to let you buy this pen multi-tester confidently. Add to Cart, use it, for any....
Check Stock

Digital Pen Type Multimeter INFURIDER YF-38B Handheld Auto-ranging Voltmeter Ohmmeter for DC AC Voltage,Resistance,Ohm Volt Test Meter with Diode Continuity

  • 【High Accurately】Display with 2000 Counts,Volt meter can accurate autoranging measurement for AC DC voltage to 600V:+/-0.5% of reading.Resistance to 20MΩ. Features with data hold,Diode test and Continuity Buzzer..
  • 【Save your Battery】Pen type digital volt tester with auto power off function and low battery indication, it will automatically shut down if you do not further operation after 20 mins..
  • 【Backlight+Flashlight】Press “☀” button on the pen multimeter to turn on bright flashlight and LCD screen backlit, Then you can accurately testing and reading in the darkness..
  • 【Overload Protection】YF-38B pen type digital multi tester features double insulation protection, CE 600V CAT Ⅲ. This volt tester is portable and stable performance, and works well as a voltage pen type and a necessity for a daily usage.  .
  • 【After-Sales Warranty】INFURIDER provide lifetime technical support, if you have any questions with our products. Do not hesitate to contact us! we will respond to you within 24hours..
Check Stock

Computer PC Power Supply Tester, ATX/ITX/IDE/HDD/SATA/BYI Connectors Power Supply Tester, 1.8'' LCD Screen (Aluminum Alloy Enclosure)

  • [8-in-1 ATX Power Supply Tester] — Support test 20-pin ATX / 24-pin ATX / HDD (IDE) / Floppy 4-pin / PCI-e 6-pin / 4-pin / EPS 8-pin (NOTE: can not fit for PCI-e 8-pin) / SATA connectors.
  • [Aluminum Alloy Enclosure] — Light and Easy to Carry, High Strength, Nice Thermal Conductivity & Corrosion Resistance.
  • [1.8” LCD Screen] — Outputted Voltages shows on the 1.8” LCD Screen, Easy to Read ( The 1.8” LCD Screen was Powered by 20-pin / 24-pin Connector ), Note: The Product Screen Has a Load of Scratches All Over It?Because The Screen is Easy to Scratch, We Put a Protective Film on It, If You Think It’s Not Beautiful, You Can Tear It Off by Yourself.
  • [Beep Alarm] — When your power supply test value is beyond normal range, the Power Supply Tester would issue a buzzer alarm, Easy to Know.
  • NOTE: The voltage of 20pin / 24pin connectors is displayed by the LCD Screen, as “+3.3V”, “+12V1”, “+5V”, “-12V”, “5VSB”, “PG” (except “+12V2” on LCD Screen).
  • The voltage of PCI-e 6P / 4P / EPS P8 connectors is displayed by the LCD Screen as “+12V2”.
Check Stock

Digital Multimeter Voltmeter Battery Voltage Multi Tester AC DC Volt OHM Amp Current Meter Circuit Continuity Resistance Diode Electrical Tester with Test Leads Backlight LCD Display

  • Accurately Test Full Features: Accurately measures AC/DC voltage, DC current, resistance, continuity test, diode and batteries (1.5, 9, 12v battery settings), transistor HFE. A very useful multimeter tester for solving industrial and household electrical issues. Suitable for outlets, fuses, automotive circuit, testing electronics, science projects, learning electronics, appliance repair, etc..
  • Circuit Continuity & Safe: Audible continuity sensor checks that the circuit or wires conduct electricity. Recommended by many teachers, professionals and engineers. Volt meter tester is designed to troubleshooting with accuracy. Overload protection on all ranges to ensure long-term service life..
  • Easy to Use: 2.7″ large backlit LCD display, data hold, low battery indicator and kickstand make voltage meter taking and recording measurements easier than ever before. Easy to read on large back-light screen for visibility in dimly light areas..
  • Protective Orange Shell with Stand Built: Can be hand held or stood using its fold out stand. Digital multimeters with good protective sleeve made of kind of non-slip slightly soft plastic that will help with drop protection..
  • 2 YEARS Warranty & Included 9V Battery: It’s a suitable voltage tester if you want to do some house....
Check Stock

Optimal Shop 20+4 Pin LCD Computer Power Supply Tester for SATA IDE HDD ATX ITX BYI Connectors-Black

  • 8-in-1 ATX power supply tester: Support testing 20-pin IDE/24-pin IDE/HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector..
  • Aluminum alloy shell: light and easy to carry, high strength, good thermal conductivity and corrosion resistance..
  • 1.8″ LCD screen: The output voltage is displayed on the 1.8″ LCD screen, which is easy to read (1.8″ LCD screen is powered by the 20-pin/24-pin connector). Note: Is there a scratch on the product screen? Because the screen is easy to scratch, we put a protective film on it, if you think it is not beautiful, you can tear it off by yourself..
  • Buzzer alarm: When your power supply PG number fails, the power tester will emit a buzzer alarm, which is easy to know..
  • When testing with HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector, the indicator on the left shows the output voltage (+12V + 3.3V + 5V)..
Check Stock

Testeronics PH Meter and TDS Meter Kit for Practical Water Testing | PH Tester Digital Accuracy 0.01 Accuracy Lab PH Meter Pen Type | ±2% Readout Accuracy 3-in-1 TDS Temperature & Conductivity Meter

  • [EASY READING BIG BACKLIT LCD DISPLAY] PH and TDS meters with double color Bigger Backlit LCD which allows wider angles of data reading and night reading..
  • [PH Meter] The pocket size digital PH pen is equipped with (ATC) auto temperature compensation function. No more need to worry about the temperature of to-be tested liquid. It can accurately determine pH value of the sample at any temperature in a range of 32°F - 140°F (0°C - 60°C). The tester can be calibrated with using Buffer Powder..
  • [TDS Meter] 3 in-1 TDS Meter Digital Water Tester, Accurate&Quick check heavy metal content, soluble salt content and temperature in the water which will be displayed on the screen in ppm (parts per million)..
  • [Accurate & Reliable] The PH tester can test quickly and accurately within ±0.01 PH. TDS meter Equipped with premium quality titanium alloy probe, Its measuring range of TDS is 0-9999 ppm with accuracy: ± 2%. It only takes a few seconds to show accurate and stable reading for the result to appear on screen..
  • [Widely Application] The tester kit is designed small and convenient. PH meter and TD&EC meter can test pH balance, ideal for testing drinking water, swimming pools, aquarium, spas, hydroponics, food, wine and beer making and more..
Check Stock

20/24 4/6/8 Pin Computer PC Power Supply Tester with LCD Display and Buzzer for ATX, ITX, BTX, PCI E, SATA, HDD

  • ...en your power supply test value is beyond normal range, the Power Supply Tester would issue a buzzer alarm, Easy to Know..
  • WITH LED DISPLAY: We have developed a portable computer power tester for the power supply market that can judge the quality of the power supply. It has LCD display intuitive and accurate display voltage (+/ 0.01V), automatic fault alarm, complete test interface, small and beautiful appearance, and more test functions. It is your best choice and reliable helper to quickly detect PC power..
  • EASY TO USE: This power tester only needs to be connected to the power supply ATX connector to easily and intuitively know whether the output of each power supply is normal. It can detect ATX, BTX, ITX, TFX computer power supply, and can display various voltage and PG values in LCD screen to quickly detect the performance of computer power supply..
  • PRACTICAL & CONVENIENCE: Small and practical power tester. Now the number of power output groups is increasing. As long as one of them has problem, the hardware of the computer system may work abnormally or even burn out. To measure whether the output voltage output of the power supply is stable, the player usually uses a multimeter. But for the average user is still a little troublesome..
Check Stock

Neoteck Electrical Test Kit, Mini Digital Multimeter + Receptacle Outlet Tester + Non-Contact 12-1000V AC Voltage Detector Pen- Great Packs!

  • 【Electrical Test Kit】Comes with a Mini 1999 Count Digital Multimeter, Non-Contact 12-1000V AC Voltage Detector, and a Receptacle Tester to Meet Most Electronic Testing Needs, Ideal for Laboratory, Education, Factory, Workshop, Household Use.
  • 【Mini Multimeter】Multi-functional Tester with Backlit LCD Display, Also Comes with with Pair Test Lead, Accurately Measures AC/DC Voltage, DC Current, Resistance, and More, Recommended by Many Professionals Engineers, CE Rated for Over Load Protection, Includes 9V Batteries Under Load.
  • 【Non-Contact Voltage Detector】 This Non-Contact Voltage Tester Detects AC Voltage within 12-1000V AC, Distinguish the Live Wire and Null Wire through Different Frequency Alarm Sound and Flashing Led Levels.
  • 【Standard US Receptacle Tester】Featuring Lights that Indicate Circuit Condition, Tests Standard & GFCI Sockets/ Outlets/ Receptacles for Proper Wiring (110-125V AC), Detect Five Different Wiring Faults: Open Ground, Open Neutral, Open Hot, Hot/ Ground Reverse, and Hot/ Neutral Reverse.
  • 【Wide Application】A Set of Quick Fix Tool, Perfect for Weekend Warriors, DIY Homeowner and Anyone just Learning How to Do This Type of Work, Helping You Evaluate the Outlets and Identify the Hot Wires in the Basement Testing, Durab....
Check Stock