Categories

Best Voltage Tester With Low Impedance Mode

Voltage Tester Pen Non-Contact with LED Flashlight - 12V to 1000V Dual Range for Broad Application (Voltage Tester Pen)

  • ❤️ Non-Contact Design - The voltage tester features a non-contact and double-insulated design. The NCV sensor automatically identifies the voltage and alerts by sound and light. This voltage detector is safe for electricians, maintenance, service, safety personnel, and homeowners to test live circuits in the workplace or at home..
  • ❤️ Dual Range Voltage Tester - This electrical tester comes with 2 sensitivity modes, high sensitivity mode (12-1000V AC) and low sensitivity mode (48-1000V AC). Simply press the "S" button to adjust the sensitivity for different needs and situations..
  • ❤️ Sound and Light Alarm - When voltage is detected, the voltage tester will flash and beep. You can distinguish live wire and null wire by different sounds and indicators. When all the red lights are on, it means that high voltage and live wire are detected, and only one red light is on to indicate that low voltage and null wire are detected. The higher the voltage detected, the higher the frequency of its beeping sound..
  • ❤️ Auto Shut Off - To save energy and extend battery life, the voltage detector will automatically shut down after about 5 minutes of no operation. The power LED will flash when the battery voltage drops below 2.5V. Please replace the battery p....
Check Stock

Klein Tools CL700 Autoranging Digital Clamp Meter TRMS 600Amp AC/DC Volts Current LoZ Continuity Frequency NCVT Temp More 1000V

  • Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy.
  • Electronic Tester's clamp measures AC current and its thermocouple probe measures temperature.
  • Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes.
  • Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages.
  • CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating.
Check Stock

Klein Tools MM700 Multimeter, Electrical Tester is Autoranging, for AC/DC, LoZ, Temp, Capacitance, Resistance, Frequency, and More, 1000V

  • Multimeter with automatic ranging true root mean square (TRMS) technology for increased accuracy.
  • Tester measures up to 1000V AC/DC voltage, 10A AC/DC current and 40MOhms resistance plus temperature, capacitance, frequency, duty-cycle, test diodes and continuity.
  • Built to withstand a 6.6-foot (2m) drop and withstand daily wear and tear on the job site.
  • Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages.
  • For use in basic and controlled electromagnetic environments such as residential, business and light-industrial locations.
  • Low battery indicator and easily accessible battery and fuse replacement compartment.
Check Stock

Klein Tools ET60 Voltage Meter, AC Voltage and DC Voltage Tester, Low Voltage Digital Multimeter Does Not Need Batteries

  • Voltage Tester for AC/DC voltage from 12-600V at nine useful levels aligned with commonly used voltages.
  • Uses standard replaceable multimeter test leads for versatility.
  • CAT IV 600V modern solid-state design for safety.
  • Easy to use bright LED display clearly reports the voltage present in the circuit being tested.
  • Integrated test-lead holders are used for lead storage or for holding the probes correctly spaced for insertion into tamper-resistant US-style outlets.
  • Inherent low input impedance reduces the possibility of falsely reading ghost or stray voltages on non-energized circuits.
  • Batteries not required, as tester is powered by the applied voltage in the circuit being tested.
Check Stock

CMTOOL Power Circuit Probe Kit 9-30V Automotive Circuit Tester, Test Light Automotive Relay Tester Kit, Car Electrical Tester Digital Voltage Tester Continuity Tester Tool with 6m/20ft Extension Cable

  • ...pplications】Continuity Test, Signal Circuit Test, Activate Components in You Hand/Vehicle/W/Ground, Check for Bad Ground Contacts, Follow&Locate Short Circuits, Trailer Lights and Connection Test..
  • 2.【Power Circuit Probe Tester with Fast Intelligent Test】Automotive circuit tester can automatically identify the voltage value, resistance value, and positive and negative polarity of the detected circuit (red light is positive, green light is negative)..
  • 3.【Automotive Circuit Tester with Digital Multimeter Mode】Automotive circuit tester contains the common parameters of multimeters, and can quickly test the DC voltage, resistance, and diode in the circuit system, current, and frequency, bringing a lot of convenience to users..
  • 4.【Electrical Tester with Oscilloscope Function】Circuit probe tester with 6M extension test lead, can display the parameter curve diagram of the tested component, such as voltage, frequency, time, etc. Users also can observe the test results more directly by adjusting the displayed interval..
  • 5.【Power Circuit Tester Kit with Component Activation Function】There is 4 activation modes for the component activation function of the automotive probe tester, which can generate "activation" signals for components, such as ligh....
Check Stock

Autel PowerScan PS100 Power Circuit Probe Kit with 40ft Cable, 12V 24V Automotive Circuit Tester, Car Electrical Diagnostic Tool, AC DC Resistance Voltage, Short Finder, Continuity/Probe/Signal Test

  • 【2023 ALL-IN-ONE POWER CIRCUIT TESTER KIT---ACCURATELY】Autel PowerScan PS100 is most accurate power circuit probe tester yet, with 160x128 TFT display test all 6-30 volt vehicle electrical systems. Autel PS100 supports voltage&polarity test, continuity test, signal circuit test, components activate, check bad grounding, locate short circuits, circuit breaker protection, etc. Intuitive interface with ergonomic design makes PS100 be best gift for all novice drivers or pro circuit repairers..
  • 【FOUR WORKING MODE---INTUITIVE&EASY】Four working modes make circuit detection more simple:DC Voltage, AC Voltage, Resistance, Tone On/ Off. DC Voltage mode can read DC voltage with 0.1V resolution.
  • AC Voltage can read Max & Min voltage, frequency and duty cycle quickly.
  • Resistance mode can read resistance between tip and auxiliary ground wire. Unique Tone On/Off Design is really useful when working in bright areas, it can judge the circuit voltage according to the volume of the sound..
  • 【COMPONENT ACTIVATION】The component activation feature is specially designed to troubleshoot on/ off-board electrical equipment. By activating the signal generated by th....
Check Stock

Fanmusic Topping L70 Full Balanced NFCA Headphone Amplifier 4Pin XLR/4.4 Balanced/6.35mm SE Output Amp with Remote Control (Black)

  • ...ested Feedback Composite Amplifier) module with A90. Voltage current hybrid feedback architecture along with UHGF (Ultra High Gain Feedback) technology provide excellent DC and AC performance, ultra-low THD+N and absurdly high dynamic range of 146dB. Even more, high output current drive capability, ultra-low output impedance and the ultra-low noise of 0.3uV which is miles ahead of the competition provide sufficient guarantee for driving headphones with various characteristics, sO that high-fidelity music can be vividly performed on different headphones..
  • 4-Pin-XL R/4. 4mm balanced/6. 35mm SE: The L70 is compatible with common headphone jacks including: 4-pin XLR balanced, 4.4mm balanced, 6.35mm single ended, and 3.5mm single- ended. The built- in fully balanced amplifier circuit can not only fit well with balanced headphones, but also have perfect performance with single -ended headphones..
  • Compatible with almost all kinds of headphones: L70's output has high output voltage, high output current, low noise, low output impedance, sO no headphones that can't be dealt with. High output voltage can easily drive high impedance headphones.
  • High output current allows low-sensitivity headphones to obtain enough power.
  • Low noise allows high- sensitivity IEMs to ....
Check Stock

Extech CT70 AC Circuit Load Tester

  • AC Load Tester, Selectable loads of 12, 15 and 20 Amps.
  • Displays Peak Line Voltage and Frequency, Outlet Tester functions, Neutral to Ground Voltage.
  • Measures loaded and unloaded AC Line Voltage.
  • GFCI Trip Time, GFCI Trip Current, Open or Reversed wiring.Complete with AC test cord.
Check Stock

USB C Tester,KJ-KayJI 2 in 1 Tester Color Screen IPS Digital Multimeter(2022),Voltage,Cur,Pwr,Resistance,Elec,Temp,Capacity,Tme,Fast Charging,with USB Clip Cable Support PD2.0/PD3.0,QC2.0/QC3.0,BC1.2

  • MULTIPLE COLOR SCREEN DISPLAY MODES: New upgraded version offers 8 LCD main color screen display interfaces, allowing switching the display interface by pressing the key. With the new interface settings, this instrument can monitor voltage, current, capacity, electric quantity, power, load impedance, D+/D- voltage and other data of USB..
  • WIDE RANGE OF APPLICATION: Thanks to the PD protocol quick charging mode measurement technology, this new multimeter supports the updated iPhone X mobile phone. (Support iphone 8 / 8P / iPhone Xs quick charging, 29W power, 5V3A / 9V3A / 12V2.5A / 15V2A). It also can be applied to test other type C devices, Compatible With Galaxy S10/S9/Note 10 +, ChromeBookPixel, OnePlus and More..
  • EVERSAME PROMISE: We have always believed that a stable and continuously improve product quality. We trust our products and we offer worry-free 18-month. For any reason you are unsatisfied with our product, just feel free to contact support for exchange or refund. WHAT WE PROVIDE: 1X USB Tester. (Note: If the USB Tester doesn’t display any parameters, please insert the small adapter being sent with the package into the side hole on the USB Tester, to trigger the PD Charging Function. ).
Check Stock

HDMI Tester Portable High Definition Network Cable Tester Checker NF-622 LED Indicator to Check Disorder Short Open and Cross Status of HDMI Cables and Hd Wire Test Ideal for Troubleshooting

  • 【Application of UT681】UT681 Handheld HDMI Cable Tester is a professional tester for testing HDMI cable (HDMI 1.2V/1.3V/1.4V/2.0V).It supports two test modes, fast scan mode and full display mode..
  • 【Function of UT681】This Cable Tester Checker can quickly scan and test up to 19 wires and decide which one is short circuit, open circuit, or in wrong order.Support Continuity Test,Short Circuit Test,Crossover Test,Network Cable Test..
  • 【Double testing mode】At the power on state, short press the ON/OFF/Option key to switch between scan mode and full display mode. The state indicator flashing style is to identify which mode is chosen..
  • 【Cable Type That Can Be Measured】Three types of HD cables can be tested: a.Both ends are standard HDMI connectors (Type A - Type A).
  • b.Both ends are HDMI Mini connectors (Type C - Type C).
  • c.One end is HDMI connector, one end is HDMI Mini connector (Type A - Type C).
  • 【Safe Tester】HDMI tester support battery low voltage Test.In order to make sure the HD cable tester’s performance, when the battery voltage is lower than about 7.2V, the blue light flashes, prompting to replace the battery.Auto shut down function, when no operation during the last 10 minutes, the instrument will automatically shut down..
Check Stock

IDEAL INDUSTRIES INC. 61-076 Vol-Con Solenoid Voltage Tester with Vibration Mode, AC/DC Voltage Level Testing, CATIII for 600v

  • SAFETY VOL-CON DESIGN: Dual voltage indication for backup safety. Independent solenoid and electronic circuitry design provides back-up voltage indication for added safety..
  • MANY APPLICATIONS: Vol-Con Voltage/Continuity Tester can be used for locating blown fuses, finding the grounded side of the line, checking continuity of cords, motors, appliances, etc., or locating excessive leakage to ground..
  • LED INDICATOR: Easy to read voltage tester. Bright, long-life LEDs and neon indicator lamp..
  • VIBRATION MODE: The IDEAL voltage tester features a vibration mode with indicator movement for clear and accurate testing..
  • ULTRA-DURABLE CONSTRUCTION: The Vol-Con Tester is extremely rugged and reliable. Ultrasonically welded and O-ring sealed for added durability..
  • Extremely rugged and reliable three-in-one tester.
Check Stock

AVID POWER Voltage Tester, Non Contact Voltage Tester Dual Range AC 12V-1000V/48V-1000V, Electric Tester Pen with LCD Display, Buzzer Alarm&Live/Null Wire Judgment, Testing Pen with Flashlight

  • Voltage Tester for AC/DC voltage from 12-600V at nine useful levels aligned with commonly used voltages.
  • Uses standard replaceable multimeter test leads for versatility.
  • CAT IV 600V modern solid-state design for safety.
  • Easy to use bright LED display clearly reports the voltage present in the circuit being tested.
  • Integrated test-lead holders are used for lead storage or for holding the probes correctly spaced for insertion into tamper-resistant US-style outlets.
  • Inherent low input impedance reduces the possibility of falsely reading ghost or stray voltages on non-energized circuits.
  • Batteries not required, as tester is powered by the applied voltage in the circuit being tested.
Check Stock

allsun Digital Insulation Resistance Meters Earth Audio Impedance Tester Handheld Megohmmeter Speaker Voice Resistor Ohmmeter LCD Backlight, Yellow(EM480B)

  • 【MEASURING THE ESSENTIAL INFORMATIONS】 Digital Insulation resistance tester has data hold, auto power off feature. Protection circuit provided, avoid damage caused by discharge voltage. True measurement of speaker systems actual impedance at 1kHz..
  • 【LARGE LCD DISPLAY& TIMER FUNCTION】 Digital Ohmmeter with backlight, max display "1999". It has full function protection, anti high voltage circuit design. Convenient protable battery operation. Low battery indication. Timer function for easier operation. The timer can last about 30 seconds minutes after users press TEST button..
  • 【WIDE MEASUREMENT RANGE】The Digital Megohmmeter has high stability and reliability,test voltage among 250V, 500V and 1000V. Measure Range up to 2000MΩ 1000V with Accuracy of ±(2% of reading +2 digits)..
  • 【EASY TO USE】The Megohmmeter tests voltage can be changed by the rotary switch. LED used as normally working indicator under high voltage condition. High ability to withstand high load. Unit symbol display, easy to use..
  • 【WIDELY APPLICATION】Handheld megohmmeter includes carrying case and belt. Most suitable for the needs of insulation resistance check, such as measuring the impedance of loud speaker,a set of soundssystem,home theater and commercial audio system.Po....
Check Stock