Categories

Best Voltage controlled Amplifiers

Rustark 169 Pcs 21 Types Integrated Circuit Chip Assortment Kit,Opamp Oscillator Logic Gate DIP IC Chip and Sockets Assorted Set with Store case for Electronic Equipment

  • ...58,LM339,TDA2030AN,TDA2822D,PT2399,UC3842AN,UC3843AN,DIP4 socket, DIP8 socket, DIP14 socket, DIP16 socket, DIP18 socket. Variety of assorted logic gate ics meets your different needs..
  • 【Fully Types for your choice】All important and useful types of Integrated Circuits into one set for your choice:dual operational amplifiers, quad operational amplifiers,photocouplers, precision timers, osciallators, dual opamps, quad opamps, comperators, audio amplifiers, echo processors, current mode controllers, darlington arrays, voltage charge pump..
  • working temp: 0°C ~ 70°C.Pls refer to picture for more details..
  • 【Widely Application】Designed for power-supply control,flexibility to tailor the power-supply control circuitry to a specific application.Widely used in instrumentation, household appliances, medical equipment, fax machines, audio equipment, medical equipment, and other electronic products..
  • 【Come with Storage Case】All of integrated circuit chips are sorted into anti-static plastic box according to label instructions. Save your time and energy to pick up suitable one when applying..
Check Stock

Harmony Audio HA-A1500.1 Car Stereo Class D Amp Mono 3000 Watt Subwoofer Amplifier - 1 Ohm Stable - Includes Bass Remote

  • Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

Juried Engineering LM386N-4/NOPB LM386N-4 LM386 Wide Input Voltage Low Power Audio Amplifier with Internal Gain DIP-8 Breadboard-Friendly (1 Piece)

  • Excellent Power amplifiers designed for use in low voltage applications.
  • Battery Operation, Minimum External Parts, Ground-Referenced Input Self-Centering Output Quiescent Vol.
  • Wide Supply Voltage Range: 4 V–12 V or 5 V–18 V.
  • Low Quiescent Current Drain: 4 mA, Low Distortion: 0.2% (AV = 20, VS = 6 V, RL = 8 Ω, PO = 125 mW, f = 1 kHz), Voltage Gains from 20 to 200.
  • Example Applications: AM-FM/Satellite Radio Amplifiers, Portable Music Player, Amplifiers, Intercoms, TV Sound Systems, Line Drivers, Ultrasonic Drivers, Small Servo Drivers, Power Converters.
Check Stock

BOSS Audio Systems PT1000 2 Channel Car Amplifier - 1000 Watts Full Range Class A/B 2-8 Ohm Stable Mosfet Power Supply Bridgeable

  • Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

BOSS Audio Systems PF1800 4 Channel Car Amplifier - 1800 Watts Full Range Class A-B 2-4 Ohm Stable Mosfet Power Supply Bridgeable

  • Power - 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

Juried Engineering LM386N-4/NOPB LM386N-4 LM386 Wide Input Voltage Low Power Audio Amplifier with Internal Gain DIP-8 Breadboard-Friendly (Pack of 5)

  • Excellent Power amplifiers designed for use in low voltage applications.
  • Battery Operation, Minimum External Parts, Ground-Referenced Input Self-Centering Output Quiescent Vol.
  • Wide Supply Voltage Range: 4 V–12 V or 5 V–18 V.
  • Low Quiescent Current Drain: 4 mA, Low Distortion: 0.2% (AV = 20, VS = 6 V, RL = 8 Ω, PO = 125 mW, f = 1 kHz), Voltage Gains from 20 to 200.
  • Example Applications: AM-FM/Satellite Radio Amplifiers, Portable Music Player, Amplifiers, Intercoms, TV Sound Systems, Line Drivers, Ultrasonic Drivers, Small Servo Drivers, Power Converters.
Check Stock

Juried Engineering LM386N-4/NOPB LM386N-4 LM386 Wide Input Voltage Low Power Audio Amplifier with Internal Gain DIP-8 Breadboard-Friendly (Pack of 20)

  • Excellent Power amplifiers designed for use in low voltage applications.
  • Battery Operation, Minimum External Parts, Ground-Referenced Input Self-Centering Output Quiescent Vol.
  • Wide Supply Voltage Range: 4 V–12 V or 5 V–18 V.
  • Low Quiescent Current Drain: 4 mA, Low Distortion: 0.2% (AV = 20, VS = 6 V, RL = 8 Ω, PO = 125 mW, f = 1 kHz), Voltage Gains from 20 to 200.
  • Example Applications: AM-FM/Satellite Radio Amplifiers, Portable Music Player, Amplifiers, Intercoms, TV Sound Systems, Line Drivers, Ultrasonic Drivers, Small Servo Drivers, Power Converters.
Check Stock

Juried Engineering LM386N-4/NOPB LM386N-4 LM386 Wide Input Voltage Low Power Audio Amplifier with Internal Gain DIP-8 Breadboard-Friendly (Pack of 10)

  • Excellent Power amplifiers designed for use in low voltage applications.
  • Battery Operation, Minimum External Parts, Ground-Referenced Input Self-Centering Output Quiescent Vol.
  • Wide Supply Voltage Range: 4 V–12 V or 5 V–18 V.
  • Low Quiescent Current Drain: 4 mA, Low Distortion: 0.2% (AV = 20, VS = 6 V, RL = 8 Ω, PO = 125 mW, f = 1 kHz), Voltage Gains from 20 to 200.
  • Example Applications: AM-FM/Satellite Radio Amplifiers, Portable Music Player, Amplifiers, Intercoms, TV Sound Systems, Line Drivers, Ultrasonic Drivers, Small Servo Drivers, Power Converters.
Check Stock

Swpeet 85Pcs 10Pcs 10 Types Integrated Circuit chip Assortment Kit,LM Series Dual/Quad Operational Amplifier Opamp Single Precision Timer Pwm - LM324 LM358 LM386 LM393 UA741 NE5532 NE555

  • ...y tens to thousands of times than that of transistors. The stable working time of the equipment can also be greatly improved..
  • 3, 【 The Most Popular LM series Dual Operational Amplifier IC Chip Kit】 ------ We have chosen a variety of useful IC types for daily assembly, such as: precision timers, dual operational amplifiers, audio amplifiers, Darlington arrays, quad operational amplifiers, etc. It is suitable for single power supply with a wide range of power supply voltages, and is also used in dual power supply operating modes..
  • 4，【 Wide Applications】----- low power consumption, strong anti-interference, small and flexible, strong processing capacity, green and environmental protection, suitable for most terminal industries, such as Photocouplers, Timers, Osciallators, Dual Opamps, Quad Opamps, Comperators, Audio Amplifiers, Echo Processors, Current Mode Controllers, Darlington Arrays, Voltage Charge Pump,etc..
  • 5, 【 With Anti-static Plastic Box】 ------ For your convenience storage and organization, we also equip you with Container Box, store commonly used IC kits according to label instructions. Its application range includes sensor amplifiers, DC gain templates and all other occasions where operational amplifiers can be powered by a....
Check Stock

ACEIRMC 2pcs MAX9814 Electret Microphone Amplifier with Auto Gain Control for Arduino

  • 1.The MAX9814 is a high-quality microphone amplifier with automatic gain control (AGC) and low-noise microphone bias. The device features a low-noise preamplifier, variable gain amplifier (VGA), output amplifier, microphone-bias-voltage generator and AGC control circuitry..
  • 2.A trilevel digital input programs the output amplifier gain. An external resistive divider controls the AGC threshold and a single capacitor programs the attack/release times..
  • 3.The low-noise preamplifier has a fixed 12dB gain, while the VGA gain automatically adjusts from 20dB to 0dB, depending on the output voltage and the AGC threshold. The output amplifier offers selectable gains of 8dB, 18dB, and 28dB. With no compression, the cascade of the amplifiers results in an overall gain of 40dB, 50dB, or 60dB..
  • 4.The MAX9814 is available in the space-saving, 14-pin TDFN package. This device is specified over the -40°C to +85°C extended temperature range. MAX9814: Simplified Block Diagram MAX9814: Simplified Block Diagram Enlarge+.
  • 5.A trilevel digital input programs the ratio of attack-to-release time. The hold time of the AGC is fixed at 30ms. The low-noise microphone-bias-voltage generator can bias most electret microphones..
Check Stock

Keeley Bassist Compressor and Limiting Amplifier Pedal

  • Built around the exotic and extremely high fidelity that Corp. 4320.
  • Very affordable studio-grade compressor in stomp box format.
  • High performance voltage controlled amplifiers, on board true-rms detector, and ultra High performance op-amps to bring you the very best quality.
Check Stock

Audiopipe EQ-709X 7-Band Graphic In-Dash Equalizer

  • CUSTOMIZED CONTROLS: Adjustable subwoofer frequency and subwoofer output level controls for customized use.
  • QUALITY PERFORMANCE: Nickel-plated locking adjustable knobs for user-friendly operation.
  • Active gain pre-amplifiers with adjustable input sensitivity for maximum performance (Input sensitivity: 50mV-3V).
  • FREQUENCY RANGES: Graphic center frequencies: 50 Hz, 125 Hz, 315 Hz, 750 Hz, 2.2 kHz, 6 kHz, and 16 kHz.
  • Frequency response: 10 Hz-50 kHz, plus or minus 1 dB.
  • SPECIALIZED CONTROLS: Individual left and right sensitivity controls for auxiliary input.
  • 20 dB headroom output and level controls.
Check Stock

Taidacent AD8130 Differential Receiver Amplifier Module Differential to Single-ended High Common-mode Rejection Ratio Low Noise Low Distortion

  • Name: AD8130 Differential Amplifier Size: 43mm X 38mm Supply voltage range: ±5V~±12V.
  • The differential-to-single-ended amplifier, which has a 270-MHz bandwidth and a very high common-mode rejection ratio (CMRR) at high frequencies, can also be effectively used as a high-speed instrumentation amplifier or to convert a differential signal to a single-ended signal..
  • Differential amplifiers can process single-ended inputs as interactive differential outputs or treat differential inputs as differential outputs. These amplifiers have two independent feedback loops that control the differential and common-film output voltages, respectively..
  • Chip features 1. High speed AD8130: 270 MHz, 1090 V/us (G= +1) AD8129: 200 MHz, 1060 V/us (G= +10) 2. High Common Mode Rejection Ratio (CMRR) 94 dB (minimum, DCE100 kHz) 80 dB (minimum, 2 MHz) 70 dB (10 MHz) 3. High input impedance: 1 MQ differential 4. Low noise AD8130: 12.5 nV/Hz AD8129: 4.5 nV/vHz.
  • 5. Input common mode range: ±10.5V 6 low distortion, 1V peak-to-peak (5 MHz): AD8130, -79 dBc (Worst Harmonic, 5 MHz AD8129, -74 dBc (Worst Harmonic, 5 MHz) 7. User adjustable gain G= +1 without external components 8. Supply Voltage Range: +4.5V to ±12.6V 9. Power saving mode.
Check Stock