Categories

Best Vortex Viper 10x4vs 10x50

EGW Glock Sight Mount For the Docter, Burris Fastfire, Vortex Venom & Viper

  • Fits: Docter, Burris Fastfire, Vortex Venom, Vortex Viper.
Check Stock

Outerimpact Red Dot Adapter Mount Compatible with Smith & Wesson SD9VE and SD40VE

  • Compatible Red Dot Sights (Mounting Screws INCLUDED): Trijicon RMR, Doctor, Insight MRDS, Eotech MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 & 3, CMORE RTS & STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS (additional screw purchase required), Holosun 407/507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1252.
  • Compatible Guns: S&W SD9VE and S&W SD40VE.
  • Dimensions: Length: 2.02' Width: 1.0' Thickness: 0.13'.
Check Stock

Vortex Optics Viper HD Roof Prism Binoculars 10x50

  • 10x magnification and 50mm objective lenses, the Viper HD binoculars have an advanced high density optical system with enhanced anti-reflective lens....
  • Dielectric, multi-layer prism coatings provide bright, clear, color-accurate images. Coating on roof prism models enhances resolution and contrast..
  • A compact, rubber-armored chasis and armortek coating ensures the Viper HD is ready for any hunt..
  • Adjust the multi-position eyecups to maximize custom fit for comfortable viewing with or without glasses. A locking right eye diopter adjusts for....
  • Argon purged and o-ring sealed, the Viper HD defies the elements ensuring waterproof and fogproof performance, no matter the conditions..
Check Stock

Vortex Optics Viper HD Roof Prism Binoculars 10x42

  • 10x magnification and 42mm objective lenses, the Viper HD binoculars have an advanced high density optical system with enhanced anti-reflective lens....
  • Dielectric, multi-layer prism coatings provide bright, clear, color-accurate images. Coating on roof prism models enhances resolution and contrast..
  • A compact, rubber-armored chasis and armortek coating ensures the Viper HD is ready for any hunt..
  • Adjust the multi-position eyecups to maximize custom fit for comfortable viewing with or without glasses. A locking right eye diopter adjusts for....
  • Argon purged and o-ring sealed, the Viper HD defies the elements ensuring waterproof and fogproof performance, no matter the conditions..
Check Stock

Vortex Optics Switchview Throw Lever for Razor & Viper Riflescopes (SV-2) , Black

  • Maximize the efficiency of magnification transitions with fluid precision using Vortex's SV-2 Switchview Throw Lever. Compatible with riflescope magnification rings with a diameter of 1.739 inches / 44 mm..
  • Constructed of skeletonized, lightweight hard-anodized aluminum, the SV-2 is one tough accessory that will serve you well. The Switchview attaches and detaches easily to the magnification ring..
  • Compatible with Razor HD riflescopes with a rubber magnification ring, Viper riflescopes with a metal magnification ring (HS-T, HS LR, HS models),Viper XBR crossbow scope, and Strike Eagle 1-8x24 riflescope..
Check Stock

Lone Star Precision Magnification Adjustment Cat Tail Throw Lever Compatible/Replacement for SV1/2 1.739 inches /44 mm

  • maximizes the efficiency of magnification transitions with Lone Star Precision Throw Lever.
  • The Throw lever attaches and detaches easily to the magnification ring..
  • Constructed of skeletonized, lightweight hard-anodized aluminum, the Lone Star Precision Throw Lever is one tough accessory that will serve you well..
  • LSP TL is Compatible/Replacement for: Vortex - Razor HD 1-4X24, Vortex Razr HD W/rubber magnification rings, Razor HD 1-4X24, 5-20x50, Viper W Metal....
  • 100% satisfaction- life time warranty offered by a proud Texas company!.
Check Stock

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • ...ot fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury..
Check Stock

DMT Products - Ambidextrous Offset Red Dot Mount

  • DMT Products – Ambidextrous Offset Red Dot Mount gives you an added sight option to your existing optic..
  • Our “one mount fits most” design ensures that whatever mini red dot you have, you can mount it, Right hand or Left hand!.
  • This Product fits the following mini red dot models: (All options shown can be mounted RH or LH of scope) – *Trijicon RMR – Holosun 507C – SIG Romeo1 – Luepold DeltaPoint – *Vortex Viper VRD-6.
Check Stock

Optic Base Mount Plate for Taurus PT111 Millennium G2 G2c G2s Original G3 Vortex Viper Venom ADE Docter Noblex Red Dot Sight Black

  • The Optic Mount Plate for the PT111 G2, Millennium G2, G2, G2c, G2s, and original G3, or TX22 pistols.
  • Made from aircraft grade aluminum and then hard anodized to mil spec for longevity and scratch resistance.
  • Designed to replace your rear sight, no milling of the slide required No gunsmithing required for this mounting plate.
  • Will work withJPoint, Shield Sight Reflex Mini Sight, Vortex Viper, Vortex Venom, ADE RD3 003, ADE RD3-006A, ADE RD3-006B, Docter/Noblex Sight C,....
  • Includes the Optic Mount Plate Installation hardware and tools.
Check Stock

Vortex Optics Razor HD Spotting Scope 22-48x65 Angled

  • Pistol mount plate fits GLOCK 17 19 22 23 26 27 34..
  • Fits Vortex Viper/Venom micro red dot sight.
  • Fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a, fits Sightmark mini shot reflex sight.
  • Fits Burris Fastfire micro red dot sight(Notes: the screws included in the package are not long enough for some Burris red dot sights, you can use the....
  • WO WOLTIS,Caution: NOT fit RMR, RMS, Doctor..
Check Stock

ADE Optic Mounting plate for Glock(Non-MOS,Non-Aftermarket Slide), Taurus GX4,G3C, Canik TP9SF to fit Vortex Venom/Viper, Burris Fastfire, ADE RD3, Sightmark Minishot, Doctor Red dot

  • ...ot fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury..
Check Stock

Vortex Optics Defender Flip Cap - Eyepiece E-10 40-46mm

  • Virtually indestructible, the Defender is the most versatile and durable flip cap on the market, this is the last flip cap you'll ever need..
  • A stainless steel spring flips the cap into multiple stop positions: vertical, 45 degrees and 90 degrees. The vertical position is for inserting your....
  • The E-10 fits all Vortex Riflescopes EXCEPT the 1-inch tube Viper model VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC..
  • Outside diameter: 41. 5-46 mm | 1. 6-1. 8 inches.
Check Stock

UTG Super Slim RDM20 Mount for Rear Sight Dovetail, Glock

  • Compatible with Glock vortex venom viper burris fastfire ade *NOT FIT Counterfeit sights.
  • Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold..
  • 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount..
  • Precision CNC Machined from 7075T6 Aluminum with Black anodized finish..
  • 100% MONEY-BACK warranty within 30 days of purchase * NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY.
Check Stock