GARDENA Retractable Hose Reel 82-Feet With Convenient Hose Guide
- With a short pull on the hose, the lock releases and the hose is drawn into the box-no bending over or cranking.
- An integrated steel spring provides even, powerful retraction.
- The integrated hose guide prevents twisting and tangling of the hose.
- Includes a Hose Guide bracket to mount on wall or corner mount.
- Nozzles, sprayers and wash brushes can be stored on the wall bracket, ready for use.
- In winter, the Hose Box can be taken by the ergonomically-shaped handle and effortlessly removed from the wall bracket for frost-protected storage.
- Hose diameter single 13 mm. Wall bracket, screws, wall plugs are all included.
Check Stock1 Pcs Replacement Wall Mount Bracket Soundbar Speaker Compatible with AH61-03768A HWF450 HWFM45 | #AA123DL
- You Purchasing 1 Pcs Replacement Wall Mount Bracket Soundbar Speaker Compatible With AH61-03768A HWF450, HWFM45.
- Wall Bracket Mount: AH61-03768A soundbar wall mount are designed for Samsung soundbar, easy to install, long lasting | Save Space: Wall mount bracket....
- Compatiblity: This speaker wall mount suitable for Samsung HW C450, HW-E450, HW-D351, HW-D570, HT-WS1G, HW-E350, HW-E450 mount, HW-F450, HT-SB1G,....
- Easy to Install: Soundbar wall mounting bracket, quick and easy to fit, bring you maximum convenience | Material & Occasion: Metal Speaker brackets....
Check StockIwillink 24 Port Patch Panel, Cat6 Patch Panel, RJ45 Keystone Network Patch Panel Rackmount or Wall Mount
- 6U WALL MOUNT RACK: This 6U 35cm deep wall mounting bracket has an open frame, 2 post design with a maximum mounting depth of 35 cm [13.78 in.] and a maximum weight capacity of 19.9kg [44.2lb].
- EASY TO INSTALL: The 6U wall mounting bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier installation, to save you the hassle of sourcing separate mounting hardware.
- COLD-ROLLED STEEL CONSTRUCTION: Made of sturdy cold rolled steel, you can rely on this mounting bracket to keep your network equipment safe and sound. This bracket is perfect in areas where space is at a premium.
- OPTIMIZE STORAGE SPACE: The 6U wall mounting bracket delivers a dependable equipment storage option, allowing you to wall mount equipment for a more efficient and accessible operating environment.
Check StockWi4You Low Voltage Mounting Bracket 10 Pack Wall Plate Mounting Bracket for RCA Networking HDMI Coaxial Cables & Telephone Speaker Wires 1 Gang
- [For 1 Gang Wall Plate] 1 Gang Low Voltage Mounting Bracket, 10 Pack for Cable Wall Plate..
- [Adjustable Fly-wings] The Single Gang Low Voltage Mounting Bracket back mounting wings can hold the brackets firmly against the wall once screws....
- [Great Wall Plate Mounting Bracket] It is the best support accessory for HDMI,TV, Coaxial, Speaker, Telephone and Networking Wall Plate..
- [Fits 1/4”to 1” Wall thickness] The 1-gang low voltage mounting bracket can be installed on the wall from 1/4” to 1” thickness..
- [Easy to Install] The installation of mount wall plates is very simple. A cut-template designed for digging holes on the drywall. And then mount and....
Check Stock
2 Pcs Folding Shelf Brackets, 8 Inch Heavy Duty Floating Triangle Shelf Brackets, Collapsible Shelves Brackets, Wall Mounted L Table Hinges Brackets for Bench Table with Screws (8 Inch)
- Premium Material: The wall-mounted heavy-duty folding bracket is made of excellent iron material with smooth surface to prevent scratches, has good corrosion and rust resistance, and the triangular shape is the most stable structure of the wall bracket..
- Easy to Install: Easy to install and fold, the folding bracket can be installed on any type of wall without damaging the wall. Just make sure the two sturdy folding brackets are parallel to each other and perpendicular to the wall. Collapsible, locking hinges heavy duty bracket lock the flip bracket at 90°..
- Space-saving Design: The foldable heavy duty shelf bracket attaches to the wall at a 90 degree angle and has only one mounting surface. It takes up very little space. Simply press the release arm and the stand can be folded up to keep your room neat and tidy..
- Wide Applications: These folding shelf brackets heavy duty can be used in garage, kitchen, store, workshop, boat, caravan, garden, trailer, bedroom, balcony, bathroom, etc..
- Package Includes: You will get 2 pcs wall shelf brackets, enough for your daily use. If you have ....
Check StockWall Mount Bracket for VIZIO S4251W-B4 SB3251N-E0 SB3651-E6 SB3851-D0 Satellite Speakers Sound Bar System Mount with Mounting Set
- ▶▶Wall Mount Bracket ▶ This for VIZIO satellite speaker mount suitable for S4251W-B4 SB3251N-E0 SB3651-E6 SB3851-D0 satellite speakers.
- ▶▶Save Space ▶ Satellite wall mount bracket provides unobtrusive wall mounting, perfect for mounting on the edge of the wall to get enough space, is a practical sound bar wall mount bracket.
- ▶▶Easy to Install ▶ Our wall bracket with mounting screw set, quick and easy to fit, bring you maximum convenience.
- ▶▶Material & Occasion ▶ Metal Speaker brackets wall mount are sturdy & durable. Ideal for home theater, office, living room, bedrooms, studio and so on.
- ▶▶180 Days Warranty ▶ Package Include: 2 Pcs satellite speaker wall mount, 9 * long screws, 2 * short screws, 8 * wall anchors. If you had any problem, please feel free to contact us.
Check StockiMBAPrice Low Voltage 1 Gang Mounting Bracket for Banana Wall Plate (5 Pack)
- 1 Gang Low Voltage Wall Plate, can be installed vertically or horizontally.
- Horizontal or vertical mounting, installs faster and costs less than metal brackets, UL Listed Designed to mount wall plates flush.
- Mounting bracket has Oval holes that allow final shifting and straightening.
- Bracket is its own template for cut-out, trace the bracket then cut the hole.
- Compatible to most 1-Gang wall plate such as banana wall plates, keystone jack wall plates, HDMI wall plates and more.
Check StockAudiovox VH125R RCAVH125N 4-Feet Antenna Bracket and Hardware Outdoor, 2-Pack
- Audiovox Wall Mount Bracket,vh125n,044476060779,audiovox Network Accessories, network Accessories, networking, audiovox Corporation.
- Antenna pole with wall mount bracket 4 2 pack.
Check Stock
Wyze Cam Pan Mounting Kit, 15 Foot Micro USB Cable Included
- COMPATIBILITY: Wall Mount for Wyze Cam V3 & Wyze Cam V2 & Wyze Cam Spotlight, provides better viewing angle for Wyze Cam camera. Note: Wyze Camera is not included, bracket not included..
- TWO INSTALLATION METHODS: The Wyze wall holder can be installed with 3M stick on or wall screws. It is very easy to install with 3M tape strong adhesive, no tools needed, no messy, no drilling. Another installation methods-wall screws holder are installed more firmly and the wall can be used wider range..
- PLUG-IN DESIGN: The wall holder adopts a plug-in design, which is easier to install and not damage the camera. The Wyze camera only needs to be inserted into the bracket, no screws, no mess install, and will not affect the 360 -degree rotation of the camera..
- SPECIAL DESIGN: The Wyze Cam V3 mount is designed with a slider auxiliary board. When the auxiliary board is removed, it is the Wyze Cam V2 bracket, providing a suitable choice for your Wyze Cam Camera..
- Wide Applicability: The Wyze Camera bracket can be installed on glass, wall, cabinet, ceiling and any other place, including paint, outdoor, etc. Note: 3M tape cannot be installed on dirty, uneven and flat surfaces with water..
Check Stock
Rentliv TV Mount for Most 37-75 inch LED LCD OLED Flat Curved TVs Up to 132 lbs Full Motion TV Wall Mount with Swivel Articulating 6 Arms Tilts Rotation TV Bracket Max VESA 600x400mm
- Universal TV Wall Bracket - Rentliv TV wall mount compatible with most 37"-75" LED, LCD, OLED Flat / Curved TVs weighting up 132lbs(60KG) .Our TV bracket fits VESA patterns from 200x100mm to 600x400mm..
- Enjoy your Viewing - Our full motion wall mount TV bracket can tilt the TV +15°/-15°to reduce glare,and swivels +/- 45° to meet your different visual needs. This TV holder with 6 dual articulating arms that retract 3.16inch(80.5mm) from the wall to save space and also extends up to a maximum 14.56inch(370mm) from the wall flexibly..
- Human Design- The hollow design of the stable wall plate leaves space for the electrical outlet, make plug in/out cables more convenient.You could easy adjust +3°/-3° horizontally by turning the screws on both sides of the face panel..
- Your Safe Choice - Rentliv TV mounting bracket constructed with solid steel materials,it has been passed the test to hold 4 times the weight they're rated to ensure safety.Sturdy wall plate to secures your TV on the wall and hanging bars with safety locks to prevent the TV from falling..
- Easy to Install - Package comes with all required mounting hardware in pre-labeled bags, bubble level and 2 cable ties .With the detailed instruction,you could install this wall bracket on 8"16"wo....
Check Stock
Mount-It! Height Adjustable TV Wall Mount Bracket with Counterbalance Gas Spring Arm - Full Motion Articulating Design Fits Flat Screens Displays Up to VESA 400x400 mm and 44 Lbs - Silver
- HEAVY-DUTY STEEL CONSTRUCTION - This Adjustable TV Wall Mount Bracket is built with high-quality aluminum steel alloys and has a powder-coated finish to increase durability. The silver coat is scratch-resistant for a long-lasting attractive appearance. This Wall Mount Bracket can support up to 44-lb. load capacities..
- SLEEK DESIGN - The Mount-It TV Wall Mount Bracket has built-in secondary features for an easier and more comfortable viewing experience. A six-degree range of rotation allows you to level your mount precisely. The spring arms can be tightened or loosened. A loose spring arm is easier to move if you need frequent adjustments, while a tight spring arm is stiff for a sturdy position, which is ideal for touchscreen or long-term configurations..
- FULLY ADJUSTABLE - The Mount-It TV Wall Mount Bracket has a dynamic range of motion with large height adjustability. It also has a massive rotating and pivoting domain to suit your preferred TV-viewing position. It can swivel over 180 degrees and tilt 30 degrees. Adjust your TV according to your most comfortable viewing position..
- VERSATILE TV MOUNT - This Wall Mount Bracket offers you infinite applications for your wall-mounted TV or computer monitor screen. Create your new favorite space by installing....
Check StockBlack Wall Bracket for LG SL8YG SN8YG SN9YG SN10YG SL9YG SL10YG SN11RG Sound Bar Wall Mount
- ❤【Product category】：Black wall bracket Kit For LG Sound bar.
- ❤【Compatible models】: This wall bracket is compatible for following LG soundbar models: LG SL8YG sound bar , LG SN8YG sound bar , LG SN9YG sound....
- ❤【Product Description】：The wall mount bracket is made of metal and is easy to install. Simply fix the bracket to the wall with screws....
- ❤【Packing includes】: ① 1 set * Wall mount bracket ② 1 set * of screw fittings ③ 1 * Installation guide.
- ❤【After sales service】: Our store provides 180 days super long warranty period and lifetime friendly after-sale service,makes sure the Risk-free....
Check Stock
Mounting Dream TV Mount Fixed for Most 42-70 Inch Flat Screen TVs TV Wall Mount Bracket up to VESA 600 x 400mm and 132 lbs - Fits 16 /18 /24 Studs - Low Profile and Space Saving MD2163-K
- ...ch, like general 42, 43, 50, 55, 65, 70, flat screen or curved TV up to 132 LBS. Flat TV mount fixed on wall is designed for TV VESA/mounting hole spacing of 600x400mm/500x300mm/400x400mm/400x300mm/400x200mm/300x300mm/200x300mm/300x200mm/200x200mm/200x100mm. TV wall bracket work for most LED OLED LCD, like Samsung/LG/TCL/Sony/Vizio/Hisense etc. large screen TV. TV mounting bracket fit 16”, 18", 24" wood stud and brick/concrete wall..
- [Low Profile TV Mount] Ultra slim TV mount makes your TV 1. 1” to the wall, narrow gap and greatly saving space Flush TV mount can blend TVs in with any décor, with its extra slim profile and very much of a streamline look. Search MD2361-K for 1.1” flush profile smaller TV mount. Search MD2868-LK for the tilt version TV mount..
- [Easy Wall Mount for TV]TV wall holder, with classic pulling straps design, quick release and lock TV breezily, no screwdriver needed. Combined pre-labeled hardware kit with clear instruction and bubble level, mounting TV bracket in less than 30 minutes. (Concrete Anchors available on request. Anchors Specifications：φ10x50mm) Search MD2351 for an even easier TV mount..
- [Heavy Duty TV Hanger] TV mounting bracket with solid 24 inch wall p....
Check Stock
