Categories

Best Wall Mount Enclosure Locking Mechanism

Barkan TV Wall Mount, 19 - 65 inch Fixed, Drywall No Stud No Drill Screen Bracket, Holds up to 71lbs, Auto Lock Patented, 5 Year Warranty , Fits LED OLED LCD, Including 6 ft 4K HDMI Cable Black

  • ► FEATURES - The TV mount fits most 19-65" TVs up to 71lbs. Fits TVs with VESA (Bracket Mounting Holes Patterns) 75x75, 100x100, 100x200, 200x100, 200x200, 300x300, 300x400, 400x200, 400x300, 400x400 mm and non VESA up to 400x400 mm..
  • ► PATENTED, AUTO LOCKING MECHANISM - This TV mount includes a US & China approved patent of Auto Locking Mechanism, to prevent the disengagement of the screen from the wall, unlike other screw locking mechanisms that are usually not performed. In the Auto lock mechanism there aren't any cords or springs that might break and it includes 2 hanging points on each side, instead of the single hanging point in most locking mechanisms..
  • ► SAFEST NO STUD MOUNT - The tall wall plate distributes the weight of the TV on the wall, making this mount the safest no-stud mount in the category! Mount the TV without drilling to walls made of drywall, plasterboard, wallboard, sheet rock, gypsum board, or gypsum panel. Connection to the wall is made with 24 nails and 2 drywall arrow anchors..
  • ► 6FT HDMI CABLE INCLUDED - High-speed HDMI cable with 18 Gbps data transfer rate. Allows watching 4K videos with a 60Hz refresh rate and 3D videos. The cable has an HDMI ethernet and audio re....
Check Stock

Barkan TV Wall Mount, 19 - 65 inch Tilt, Flat / Curved Screen Bracket, Holds up to 110 lbs, Auto Lock Patented, Lifetime Limited Warranty, Fits LED OLED LCD, Black, (E310)

  • LIFETIME LIMITED WARRANTY - This mount was tested with 421 lbs. 100% of Barkan products pass strict quality tests.
  • SELF, EASY AND FAST ASSEMBLY - 1. Attach the adapters to the rear side of the TV 2. Install the bracket on the wall 3. Snap the TV onto the bracket.
  • PATENTED, AUTO LOCKING MECHANISM - This TV mount includes a US & China approved patent of Auto Locking Mechanism, to prevent the disengagement of the screen from the wall, unlike other screw locking mechanisms that are usually not performed. In the Auto lock mechanism there aren't any cords or springs that might break and it includes 2 hanging points on each side, instead of the single hanging point in most locking mechanisms.
  • EXTRA STABILITY - The high and wide wall plate creates a better distribution of screen's weight on the wall, therefore ensuring its stability. With this bracket, the TV will stay mounted on the wall for a lifetime.
  • FEATURES - The TV mount fits most 19-65" TVs up to 88 lbs. Fits TVs with VESA Bracket Mounting Holes Patterns 75x75, 100x100, 100x200, 200x100, 200x200, 300x300, 300x400, 400x200, 400x300, 400x400 mm and non VESA up to 400x400 mm. Distance from the wall is only 2.7".
  • FUNCTIONALITY - To provide a better point of vi....
Check Stock

Barkan 32 - 90 inch Tilt Flat / Curved TV Wall Mount 132 lbs Black Auto Locking Patent Touch & Tilt Bubble Level Included 20 Year Warranty

  • ...0x400 mm and non VESA up to 600x400 mm..
  • ► FUNCTIONALITY - To provide a better point of view, the mount has a tool free tilt from 0° till 15°..
  • ► TOUCH & TILT - Easily tilt the TV by gently pushing it to the desired angle. Enjoy the perfect point of view without any trouble..
  • ► PATENTED, AUTO LOCKING MECHANISM - This TV mount includes a US & China approved patent of Auto Locking Mechanism, to prevent the disengagement of the screen from the wall, unlike other screw locking mechanisms that are usually not performed. In the Auto lock mechanism there aren't any cords or springs that might break and it includes 2 hanging points on each side, instead of the single hanging point in most locking mechanisms..
  • ► WORLD KNOWN BRAND - Since its foundation in 1988, Barkan Mounts has been working to enhance the viewing experience of the customer. Our expertise is in the development, manufacturing and marketing of designed and innovative TV Mounts. Our customer service experts are available every day of the week, and are ready to help! Visit our website to find more information, any kind of help, manuals, FAQ and more..
  • ► KIDS SAFETY - Child safety is of the utmost importance. When it comes to TVs and appliances our goal is to raise the awareness o....
Check Stock

Barkan TV Wall Mount, 13-90 inch Tilt Flat/Curved Screen Bracket, Holds up to 132lbs, Auto Lock Patented, Extendable Wall Plate - 6 Products in 1, Fits LED OLED LCD (BM410T)

  • ► TOUCH & TILT - Easily tilt the TV by gently pushing it to the desired angle. Enjoy the perfect point of view without any trouble..
  • ► FEATURES - The TV mount fits most 32-90" TVs up to 132lbs. Fits TVs with VESA (Bracket Mounting Holes Patterns) and non VESA..
  • ► PATENTED, AUTO LOCKING MECHANISM - This TV mount includes a US & China approved patent of Auto Locking Mechanism, to prevent the disengagement of the screen from the wall, unlike other screw locking mechanisms that are usually not performed. In the Auto lock mechanism there aren't any cords or springs that might break and it includes 2 hanging points on each side, instead of the single hanging point in most locking mechanisms..
  • ► WORLD KNOWN BRAND - Since its foundation in 1988, Barkan Mounts has been working to enhance the viewing experience of the customer. Our expertise is in the development, manufacturing and marketing of designed and innovative TV Mounts. Our customer service experts are available every day of the week, and are ready to help! Visit our website to find more information, any kind of help, manuals, FAQ and more..
  • ► KIDS SAFETY - Child safety is of the utmost importance. When it comes to TVs and appliances our goal is to raise the awareness o....
Check Stock

Horizontal Guitar Wall Mount + 5 Guitar Hooks: Guitar Rack & Guitar Hanger Wall Mount Guitar Holder Stand, Banjo Hangers, Ukulele Wall Mount Guitar Accessories & Violin Wall Mount Organizer -48” Black

  • THE STRONGEST GUITAR HANGER ON THE PLANET: Enjoy a high-load-capacity Slat wall rack w/ aluminum reinforcements + steel hangers. Our hangers new gusset boosts strength by 80%, foam padding protects delicate finishes & the locking mechanism secures the guitars safely. It’s the sturdiest guitar hanging rack available, perfect as guitar accessories gifts for men!.
  • EASY TO INSTALL GUITAR HOLDER WALL MOUNT: Instructions + hardware included for quick installation. Our slatwall fits flush against the wall, while the guitar wall hanger 4 pack or 8 pack artfully displays your beloved instruments. Can be used as a classical guitar, acoustic guitar or bass guitar wall mount bracket, a ukulele wall mount or even a banjo wall mount hanger..
  • CUSTOM WALL GUITAR MOUNT RACK: Our wall mount guitar hangers slide left & right to position each instrument mount exactly where you want + feature an adjustable y....
Check Stock

MQCE220-WEBKIT2

  • ...0×150, 100×200, 200×100, 200x200mm. Locking TV mount fits different types of TV like Lcd/Led/Oled/Qled/Mini Led, alternative or direct current TVs and DVD combo TVs. Television mount fits RV, camper, trailer, mobile home, truck and boat with wooden board ≥ 1/2 inch thick..
  • ✔[LOCKABLE RV TV MOUNT] Locking mechanism of RV mount secures swivel arms and TV plate at one time when vehicle in motion to prevent any bumps. Easily lock and release your TV/Monitor with the pulling strap, stop creaking on your trip..
  • ✔[FULL MOTION RV WALL MOUNT] Adjustable articulating RV TV mount for camper can be rotation by 180°, and extended to 15.59” and retracts to 3.86”. RV TV bracket can be adjusted upward and downward, with tilting angle from +3° to -15°. Swivel RV mount can be swung left or right by 90°..
  • ✔[EASY INSTALLATION ] With clear instruction and all included hardware in pre-labeled bags, camper tv mount can be installed in less than 15 minutes. Wall mount and removable tv mount for rv with double wall plates can be detached from one location and mounted on another, indoor or outdoor..
  • ✔[CUSTOMER SUPPORT] We are glad to answer your pre-purchase and installation questions. Please check you TV VESA size, TV weight before order. This tv mount ....
Check Stock

Mounting Dream Lockable RV TV Mount for Most 13-43 inch TV, RV Mount for Camper Trailer Motor Home, Full Motion TV Wall Mount Bracket Quick Release with Dual Wall Plates, VESA 200x200, 22 lbs, MD2212

  • ...ruction and all included hardware in pre-labeled bags, RV TV wall mount can be installed in less than 30 minutes. Wall mount and removable TV bracket for RV with double wall plates can be detached from one location and mounted on another, indoor or outdoor..
  • [Lockable TV Mount for RV] Comes with unique locking latch mechanism design – Lock mechanism of swivel TV mount keep swing arms in place when vehicle in motion, and easily release your TV by pulling strap..
  • [US-based Customer Service] US-based customer support is 7 days a week, and we are glad to answer your pre-purchase and installation question about the lockable RV TV mount..
Check Stock

USX MOUNT Lockable RV TV Mount for Most 10-26 Inch LED, Flat Screen TVs RV Mount on Motor Home Camper Truck Marine Boat Trailer Full Motion TV Wall Mount up to 33 lbs VESA 100x100mm Easy One Step Lock

  • HEAVY DUTY TV MOUNT: RV full motion TV mount fits for most 10-26 inch TVs up to 33 lbs., with VESA/mounting holes spacing from 50x50mm to 100x100mm,. Please check you TV VESA size, TV weight before order. This mount was made in highly steel makes whole unit sturdy and safe..
  • UNIQUE ONE STEP LOCK MECHANISM: RV mount with unique locking mechanism with 20mm tongue secures and then fixed swivel arms and TV plate at that time when the vehicle is in motion to prevent any bumps. One-step safety locking system helps you better release and lock the TV in place securely with the pulling strap. Spring latch of RV TV mount can help use more easy on Locking mechanism and stop creaking on your trip..
  • EASY INSTALLATION: RV TV wall mount with quick installation design,when you hang and secure TV to wall plate. The Package contains clear instruction and all included hardware in pre-printing number bags. The wooden board in the vehicle should be thicker than 1/2 inch. +/-5 degrees post-installation adjustment allows.
  • ADJUST FOR OPTIMAL VIEWING: This Articaulating RV TV mount Tilts +5°/-15°，swivels+/-90°（Tips ：Swivel angle depends on your TV size）.
  • PRODUCT INCLUDES: Come with bubble level, 3 pieces pack of cable ties and all standard mounting hardware ....
Check Stock

KDG RV TV Mount for Most 13-45 inch TV, Lockable RV TV Wall Mount for Camper Trailer Motor Home, Full Motion Wall Mount Bracket, Swivel Tilt Extension Rotation, Max VESA 200x200mm, up to 55lbs (Black)

  • Use 1 TV in 2 Different Locations! Easy pull chain locking + release mechanism, No messing with gears, knobs, straps, or ties.
  • Easily Move your Locking TV Mount from Inside to Outside, From RV to Garage!.
  • Keep Your TV Safely Locked in Place While Your Vehicle Is in Motion with our Easy Pull Chain Locking Mechanism.
  • 2 Wall Brackets and 1 Portable Full Motion Locking TV Mount for Perfect Viewing Angles. Brackets have built-in bubble levels for easy mounting..
  • Fits VESA 75×75, 100×100, 200×100, 200×200. Fits MOST TV Screens up to 50”. Strong Aluminum Construction.
Check Stock

Voilamart 4PCS Wall Mounted Bike Rack Garage Space Saving Bicycle Wall Hanger Vertical Bicycle Storage Stand for Indoor Garage Max. 66 Lb

  • Heavy Duty: Made of strong solid steel, light-weight and durable. Can handle up to 66lbs of a bike, and it depends on how strong the wall is..
  • Rubber Coating: Hooks feature a rubber coating to protect your bicycle from scratches..
  • Dimension: Accommodates tires width with 2.17" or less. Suitable for road bikes, folding bikes etc..
  • Easy Installation: It don't take too much effort to install. 3 Steps: - drill hole, place studs, tighten screws. All screws and studs needed are included. Great storage solution for small spaces..
  • Locking Mechanism: Safety engineered locking mechanism prevents accidental release. Important!！！Do not mount hanger on plasterboard wall or dry wall unless there is a wood stud behind..
Check Stock

Glosen Locking Medicine Cabinet Wall Mounted and Portable Storage Container Big Capacity Green 15.62 x 6.5 x 15.43 Inch

  • Modern Design Secure Wall Mount Medicine Cabinet. Size: Height 22.25", Width 10.5", Depth: 4.75".
  • Frosted hinge door with locking mechanism and clear medical cross symbol indication.
  • Heavy duty four shelves with D:4.25" x H:5.15" x W 10.5".
  • Strong build body with modern white moisture resistance coating.
  • Magnetic catch door with locking mechanism.
Check Stock

Mounting Dream Lockable RV TV Mount for Most 10-26 Inch Flat Screen, RV Mount TV Bracket for Camper Trailer Truck Boat, Full Motion RV TV Wall Mount Quick Release Lock, VESA 100x100mm, 22 lbs MD2209

  • ...] RV TV Mount for Motor Home / Camper / Truck / Marine Boat -- TV mount for RV fits TV size for 10-26 inch and supports TV up to 22 lbs. weight with VESA/mounting holes spacing of 50x50mm, 75x75mm, 100 x100mm. Not perfect? You can check Mounting Dream MD2210 RV mounts for the best options..
  • [ EASY ONE STEP LOCK MECHANISM ] RV wall mount with unique locking mechanism with 10mm tongue secures swivel arms and TV plate at one time when the vehicle is in motion to prevent any bumps. One-step locking system helps you better release and lock the TV in place securely with the pulling strap. Spring latch of UPGRADE VERSION RV TV mount can stop creaking on your trip..
  • [ UPGRADE VIEWING EXPERIENCE ] RV TV mount provides more enjoyable viewing angles, has a tilting angle from +5° to -15°, and swivels up to -/+90°on each side. To help better level the TV, provide up to -/+3°for level management..
  • [ EASY INSTALLATION ] RV TV wall mount with clear instruction and all included hardware in pre-labeled bags. The wooden board in the vehicle should be thicker than 1/2 inch. Pull out to 13. 6 inch/346mm and retract back to 2. 6 inch/68mm, making your TV flexible to move..
  • [ CONSIDERABLE SERVICE ] We are glad to answer your pre-purchase and installation question abou....
Check Stock

Morimoe Guitar Bass Stand for Multiple Guitars Display Foldable Rack (3-Space)

  • AUTO LOCKING MECHANISM- Ueteto guitar wall mount hanger has an auto-locking/unlocking arms, which instantly engage/disengage from the weight of the instrument, making sure your valuable guitars stay in place even during an earthquake..
  • WORK WITH UNEVEN HEADSTOCKS - The guitar hanger wall mount swivels to accommodate oddly-shaped head stocks, so it works with all types of guitars like acoustic, electric, bass, classical guitar and ukuleles, banjos and mandolins. It is even essential for deep-body guitars like dreadnoughts for providing plenty of wall clearance..
  • EASY INSTALLATION - The guitar hanger is spring loaded.
  • it is pushed into a notch at 45 degrees then turned to lock it in place and then that's it. An adhesive template is provided for drilling, along with wall anchors and screws for wall mounting on bricks wall, dry wall, stud or wood. Wall anchors are upgraded after reading previous customers’ reviews, and please do use the bigger anchors and screws for drywall mounting..
  • PROTECT YOUR INSTRUMENT - Yoke cradle is covered with a high-density rubber to protect your guitar's finish. It works fine for polyurethane or acrylic finishes. Hefty enough to hold heavier instruments up to 15KG..
  • EASY ACCESS TO INSTRUMENTS- The guitar stands holds your inst....
Check Stock