Categories

Best Wall Mount Network Junction Boxes

4 Port in-Wall Gigabit PoE Extender with IEEE 802.3bt Uplink - Power Over Ethernet Switch Wall Plate with Full Passthrough VLAN Computer Network IP Camera Feed Internet Office VoIP

  • 4 PoE+ ports on one network cable run. 60 Watt max PoE+ switch powers up to four IEEE 802.3af or two 802.3at IP phones, WiFi access points, or other low voltage devices over 600 feet from the PoE source..
  • An in-wall PoE passthrough switch opens up opportunities. Our 4 port PoE switch lets you add devices and capacity anywhere on your network, without the cost of adding extra lines and expensive infrastructure..
  • Wall mount PoE switch fits flush to wall boxes for a clean, stylish install. Install this power over ethernet switch into any standard electrical wall box for complete integration into your home or office..
  • Mount the PoE extender in any remote office, dorm room, or hotel room. Functions as a network switch for office VoIP phone systems, multiple live IP camera feeds, and anywhere that needs a little extra power and network capacity..
  • Covered by an industry leading 1-year manufacturers warranty and lifetime technical support with a PoE Texas expert. Please email or call 512 479 0317.
Check Stock

4 Packs cat6 Ethernet Wall Plate Outlet 1 Port RJ45 Network Female to Female Keystone Wall Coupler Jack Plate - Blue

  • ... is easy to plug one ethernet line into front and another into back,no punch-down tool required.You can use multiple panels to interconnect to extend your LAN cable for a longer length to gain LAN access.It's usually used in home, office, hotel, Laboratories and shops etc.Avoid the inconvenience of replacing longer network cable..
  • Easy to install: The internet wall outlet is best used with a "keystone" wallboard, patch panels, or surface mount boxes for easy installation.The ethernet jack wall plate is equipped with screws,you only need a standard screwdriver to install it easily.Keystone's design makes it easy to clip in the retaining clips, ensures a safe and non corrosive connection, and can be removed in future upgrades.
  • Texture Material: The network jack wall plate is made of ABS flame retardant material,so the RJ45 ethernet female to female jack wall plate is resistant to high temperature.You can use it for a long time and it doesn't fade.And the surface is smooth and delicate, very beautiful. And with Sturdy metal screws, they will not fall off during installation..
  • Compatibility,Standard size: The FacePlates is compatible with Cat7 Cat6 Cat5 Cat5e network ethernet cable.The Ethernet Cable Wall panel size fits a standard single gang wallplate ope....
Check Stock

Universal Bullet Security Camera Junction Box Mount Bracket, Plastic Junction Box Compatible with Arlo Solar Panel and Reolink Solar Panel,Outdoor/Indoor Use CCTV Junction Mounting Box

  • Applicable to Multiple bracket camera junction box, you can use Bullet camera、Dome camera and solar panel brackets to collect the excess wires.
  • Easy to install: rainproof design Ip54,This junction box can only prevent light rain. If it encounters heavy rain, this product will get water, but it will not affect the normal use of the camera. The function of the junction box is to hide the extra wires of the solar panel and the camera.Junction box mainly used for outdoor and indoor，Interior ceiling.Easy to install, just need to drill holes in the wall.
  • Compatible with model:Security Camera Junction Box is compatible with the Arlo solar panel and Reolink solar panel,as well as other compatible camera models including Replacment mount for Ring Stick Up Cam/Indoor/Battery Cam DS-2CE56D0T-IRMF , DS-2CD2042 security camera junction box and VMA4600-10000S ,VMA3600 , VMA5600 solar panel Bracket.
  • Hidden cables: cables can be passed through the top/bottom. Very suitable for hiding cables and connectors in junction boxes. Easy to operate and maintain, ideal for protecting cables..
  • Product Size: Diameter 4.4inch, Height 1.95inch. Plastic PC+ABS.
Check Stock

Cable Matters UL Listed Cat6 5-Pack RJ45 Surface Mount Box - 2 Port in White (Cat6 Ethernet Mount Box))

  • Sturdy 2 port Cat6 Ethernet surface mount box can add an RJ45 network outlet at any wall-mountable location.
  • Mount with the included mounting screws or double-stick tape.
  • Surface mount RJ45 biscuit box has a snap-on cover with a recessed label space.
  • Supports T568A and T568B wiring with 110-style, color-coded termination blocks.
  • Dual IDC terminals accept 110 or Krone impact tools.
  • compatible with 23 to 26 AWG unShielded twisted pair cable.
  • Category 6 rated to meet or exceed Category 6 performance in compliance with the ANSI/TIA/EIA 568-C.2 standard up to Gigabit Ethernet speeds for a fast and reliable network.
  • Cost effective 5 pack of Ethernet jacks provides surface boxes to add or repair five office or home installations with two network cables at each location.
  • UL listed (E486099) and RoHS compliant for a safe and reliable installation.
  • Heavy duty construction includes an impact-resistant and fire-retardant housing with gold-plated RJ45 contacts.
Check Stock

Bathroom Vanity Light Wall Sconce Industrial Kitchen Wall Lighting Oil Rubbed Black Baking Paint Finish (3-Light)

  • STANDARD FIXTURE REQUIREMENTS:110-120V for North America. Compatible with incandescent, LED, CFL and halogen bulbs with two E26 sockets and 60W Max. Bulbs sold seperately..
  • UNIQUE DESIGN: Oil Rubbed Black Baking Paint Finish and this Vantity Light is perfect for your home decor..
  • VINTAGE MODERN STYLE:Industrial Wall Lighting. Creates a rustic atmosphere for Bathroom,Kitchen,bar,coffee shop,dining room and office..
  • EASY INSTALLATION: This light is prewired and pre-assemble, only need to attach the lampshades and then mount onto the junction boxes on the wall for longlasting use and look..
Check Stock

Bathroom Vanity Light Wall Sconce Industrial Kitchen Wall Lighting Oil Rubbed Black Baking Paint Finish (2-Light)

  • STANDARD FIXTURE REQUIREMENTS:110-120V for North America. Compatible with incandescent, LED, CFL and halogen bulbs with two E26 sockets and 60W Max. Bulbs sold seperately..
  • UNIQUE DESIGN: Oil Rubbed Black Baking Paint Finish and this Vantity Light is perfect for your home decor..
  • VINTAGE MODERN STYLE:Industrial Wall Lighting. Creates a rustic atmosphere for Bathroom,Kitchen,bar,coffee shop,dining room and office..
  • EASY INSTALLATION: This light is prewired and pre-assemble, only need to attach the lampshades and then mount onto the junction boxes on the wall for longlasting use and look..
Check Stock

Audiovox VH125R RCAVH125N 4-Feet Antenna Bracket and Hardware Outdoor, 2-Pack

  • Audiovox Wall Mount Bracket,vh125n,044476060779,audiovox Network Accessories, network Accessories, networking, audiovox Corporation.
  • Antenna pole with wall mount bracket 4 2 pack.
Check Stock

Pyle in Wall Speaker Volume Control – Home Audio Smart 2-Channel A/B Dual Channel Speakers Controller Selector Pod Box – Rotary Knob Fader Control Up to (2) Pair of Indoor or Outdoor Speakers PVCD15

  • EASY TO INSTALL: The Pyle in-wall stereo volume control installs in a junction box, just like a light switch. Fits standard electrical junction/gang boxes. Makes it simple and easy to direct your home amplifier audio to 2 sets of speakers.
  • ROTARY KNOB OPERATION: The indoor outdoor speaker controller features a convenient and simple rotary knob controls which makes volume adjustments a breeze! Control up to 2 speakers with the two independent rotary faders.
  • OPERATION: Set the amplifier’s volume control to minimum. Turn on the amp and set its volume control slightly above the normal listening level. To increase/decrease the remote speaker’s volume turn the inwall volume control clockwise/counterclockwise.
  • UNIVERSAL COMPATIBILITY: The 2 channel speaker volume fader is compatible w/ all audio and video systems making it a wise choice to add to your home theater system. It also features up to 120 watts load handling power.
  • STANDARD SIZE: It features a universal standard wall plate size. The included decora-style wall mount plate frame cover means this controller will unobtrusively blend into your wall and allows for a clean installation on your walls.
Check Stock

ECUDIS Lighting Adjustable Crossbar with Screws and Nuts Multifunctional Ceiling Light Bracket Light Fixture Crossbar Plate for Mount Wall Light Close to Ceiling Light Chandelier

  • This is an all purpose mount device, with more options for use than other items, please check your lamp plate size and the hole spacing before....
  • Adjustable size form 4.33 to 5.12 inches, if you have a fixture that is awkward to mount, this bracket may solve your problem..
  • It's easy to install the crossbar on the electrical junction boxes, please follow your local electrical codes and regulations..
  • Adjustable iron light hardware tools for lighting fixture installation, you can use it for mount wall light, close to ceiling light, ceiling fans,....
  • Package includes: 1 x crossbar, 2 x 1.5" screws, 2 x 1" long screws, and 2 x black acorn cap nuts, 2 x silver acorn cap nuts..
Check Stock

VICTEK Female to Female Cat6 Keystone RJ45 Couplers, 10 Pack, White, Tablet

  • ★ FITS ALL STANDARD KEYSTONE WALL-PLATES:Cat6 RJ45 Keystone jack in-line coupler installs in patch panels, surface mount boxes, or keystone wall plates (face plates) with standard keystone ports.
  • ★ 8P8C female to female keystone jack cat6 used with Cat 6/RJ45, Cat5, CAT5e Ethernet networking cables, Compatible with standard 4-wire RJ11 telephone/fax line, 8P8C Ethernet network jack insert.
  • ★ Female-to-female CAT6 keystone jack RJ45 easily joins two RJ45, CAT5E or CAT6 wiring together, then run your own network throughout the home.
  • ★ CAT6 Keystone inline Coupler is great for voice, home networking, home office, audio, video and more DIY project.
  • ★ RJ45 keystone jack inline coupler meets Category 6 performance and in compliance with the TIA/EIA 568-C.2 standard,This product is made by XIAOYU.
Check Stock

Cable Matters UL Listed Cat6 5-Pack RJ45 Surface Mount Box - 1 Port in White (Cat6 Ethernet Mount Box))

  • Sturdy 1 port Cat6 Ethernet surface mount box can add an RJ45 network outlet at any wall-mountable location.
  • Mount with the included mounting screws or double-stick tape.
  • Surface mount RJ45 biscuit box has a snap-on cover with a recessed label space.
  • Supports T568A and T568B wiring with 110-style, color-coded termination blocks.
  • Dual IDC terminals accept 110 or Krone impact tools.
  • compatible with 23 to 26 AWG unShielded twisted pair cable.
  • Category 6 rated to meet or exceed Category 6 performance in compliance with the ANSI/TIA/EIA 568-C.2 standard up to Gigabit Ethernet speeds for a fast and reliable network.
  • Cost effective 5 pack of Ethernet jacks provides surface boxes to add or repair five office or home installations.
  • UL listed (E486099) and RoHS compliant for a safe and reliable installation.
  • Heavy duty construction includes an impact-resistant and fire-retardant housing with gold-plated RJ45 contacts.
Check Stock

StarTech.com 4U Hinged Wall Mount Patch Panel Bracket - 6 inch Deep - 19

  • Wall-mount a patch panel or network switch while providing hinged access to the back of the device(s) 8 kg (17 lbs) weight capacity.
  • 4U hinged network panel / Shallow 4U wall-mount rack / Patch panel rack / mount patch panels to the wall / Wall mount rack with hinge / 4U patch panel rack.
  • Hinged side panel allows for easy access to the rear of the mounted equipment for easy adjustment.
  • Wall mounting holes spaced 16 in. apart matching standard dry-wallDescriptionThe WALLMOUNTH4 4U 19in Hinged Wall Mounting Bracket for Patch Panels is 6in deep and sturdily designed to provide a dependable solution for mounting a patch panel, or other slim 19in networking equipment to a wall. The patch panel wall mount features a hinged design for easy access to configuration buttons, ports and cables.The wall mountingholes are spaced 16 in. apart, making it suitable for mounting on almost any wall, based on common wall-frame stud spacing. Backed by a StarTech.com 2-year warranty..
Check Stock

ECUDIS 4 Cross-Shaped Universal Light Fixture Crossbar Lighting Crossbar with Screws and Nuts

  • 4" Off Swiv Offset light crossbar, 3 13/16" in length with screws and nuts..
  • Use to mount lighting fixtures to wall or ceiling, match black and silver lamp..
  • Easy to install the crossbar on the electric box, please follow your local electrical codes and regulations..
  • Adjustable hardware iron light hardware tools for lighting fixture installation, you can use it for fixtures or canopies to electrical junction boxes.
  • Package includes: 1 x crossbar, 2 x 1.5" screws, 2 x 1" long screws, and 2 x black acorn cap nuts, 2 x silver acorn cap nuts..
Check Stock