Categories

Best Wall Mount Patch Panel Shelf

JINGCHENGMEI 3U 125 lb Weight Capacity Heavy Duty 19 Inches Steel Vertical Patch Panel Mounting Bracket for Networking Equipment (MFT-HVWRF3U)

  • STANDARDIZED HOLE SIZING: The mounting holes on the wall rack mount are 16 inches center to center for greater stability, and mounting to standard wall studs.
  • DURABILITY: Constructed to EIA-310 19in rack standards, the wall mount data rack features a solid steel design for ultimate durability. Max weight loading capacity: 125 pounds..
  • NO ASSEMBLY REQUIRED: For added convenience, this wall mount patch panel bracket arrives fully assembled with cage screws and nuts for mounting equipment..
  • VERSATILE FUNCTIONALITY: This multi-use patch panel mounting bracket enables you to mount your server or networking equipment vertically on a wall or horizontally under a desk for added versatility.
  • ENVIRONMENTALLY FRIENDLY: this foldable rack is at less volume, lower freight charge, smaller packaging. Easy to carry..
Check Stock

Patch Panel Mini 12 Port Cat6A with Inline Keystone 10G Support, Rapink Coupler Patch Panel STP Shielded 10-Inch with Removable Back Bar, 1U Network Patch Panel for Cat7, Cat6, Cat6A, Cat5e Cabling

  • 【10G speed via Gold plated pins】 All 8P8C of rj45 jack panel keystone are golden plated to support better network connection up to 10G speed Ethernet network. This is a well made keystone panel and can be used as cat7 patch panel to upgrade cat7 network..
  • 【Detachable back bar included】This patch panel wall mount contains thick steel detachable back bar. With zip ties, it can effectively reduce the deformation of the ethernet cable, improve the working stability of the network connection port, and avoid keystone loose and the occurrence of network failures caused by the loosening and deformation of the cable. What you get?12 pcs sturdy cat6a coupler keystone loaded patch panel wall mount, removable cable back bar, screws, tie wraps..
Check Stock

Metal Master - 5 Pack Rackmount or Wall Mount 24 Port UTP Keystone Patch Panel (Unshielded Blank Patch Panel for Keystone Jacks UTP Keystone Panel), Black

  • Pack of 5 pcs: 5 Pcs as a pack makes the freight and cost lower..
  • Rack or wall mount patch panel is universally compatible with 19 racks, cabinets, or wall mount brackets with 1U (1.75") standard height.
  • Multimedia panel consolidates voice, data, video, stereo, coax, fiber and other cables types in a single location.
  • Add or upgrade a cable without purchasing a new patch panel.
  • Keystone blank patch panel supports standard sized keystone jacks for audio, video and data.
  • Accommodates an HDMI keystone, RJ45 keystone, RG6 keystone, 3.5mm keystone, USB keystone, fiber keystone, and many other types of keystone jack inserts.
  • 1.5mm thick black coated SPCC steel material for heavy duty uses.
Check Stock

19 Inch Vertical Wall Mount Rack- 125 Pounds Heavyload Wall Mountable Server Rack (1U, Black)

  • Product Size: 5.9" High, Fitting your Standard 19" Server or Networking Equipments..
  • Heavy Duty Loading: Max 125 Pounds Heavy loading.
  • Vertically or Horizontally Mounting: This multi-use patch panel bracket enables you to mount your equipment vertically on a wall or horizontally under a desk..
  • No Assembly Required: the wall mount patch panel bracket arrives fully assembled with cage screws for mounting equipment in your data center.
Check Stock

TRENDnet 24-Port Blank Keystone 1U Patch Panel, TC-KP24, 1U 19' Metal Rackmount Housing, Recommended w/ TC-K25C6 & TC-K50C6 Cat6 Keystone Jacks (sold separately)

  • ADDED MOUNTING FEATURES: The IT server room cabinet features a 2U mounting bracket positioned toward the top of the enclosure, that you can use to mount patch cables or other rack-mount equipment..
  • SAVES SPACE: The 6U wall mount network cabinet saves space by extending only minimally from the wall and housing the length of your equipment vertically..
  • STURDY DESIGN: To help keep your equipment secure, the vertical vented 6U wall mount data rack cabinet features a sturdy metal design and a lock on both the door and access panel..
  • HASSLE-FREE INSTALLATION: The wall mount patch panel rack cabinet comes fully assembled and includes all of the necessary hardware to install equipment. The mounting holes are spaced 16 in. apart..
Check Stock

HQYing 2U Wall Mount Patch Panel Bracket-19 Inch Vertical Wall Mount Rack- 125 Pounds Heavyload Wall Mountable Server Rack 2U Black

  • Product Size: 5.9" High, Fitting your Standard 19" Server or Networking Equipments..
  • Heavy Duty Loading: Made of one Piece of Steel and Makes the Bracket Strong Enough to Load 125 lbs Maxly..
  • Vertically or Horizontally Mounting: This multi-use patch panel bracket enables you to mount your equipment vertically on a wall or horizontally under....
  • No Assembly Required: the wall mount patch panel bracket arrives fully assembled with cage screws for mounting equipment in your data center.
  • Standard Wall Mounting Holes: Wall Mounting Holes are 16-inch Center to Center for Mounting to Standard Wall Studs..
Check Stock

iwillink (5 Packs Unshielded RJ45 Cat6 Keystone Jack, 180 Degree Toolless Keystone Jack

  • Toolless Termination - 24 Port Cat6 pass through Patch Panel came with couplers making it easier to connect the cables without any punching down. Simply plug the Cat6 cable into the 24 RJ45 coupler jacks on either side of the Ethernet panel..
  • Gold Plated Keystone - Gold-plated contacts ensure corrosion-free connections and improve connector durability. This patch panel meets and exceeds industry standards to support better network connections up to 10G Ethernet speed..
  • Rack Mountable - Install this Ethernet patch panel in a standard 1U (1.75") height universal 19" rack, cabinet or wall bracket..
  • Easy Repair - The keystone of coupler patch panel are removable if necessary for replacement or upgrade.Meanwhile, if need expand in the future, you can easliy replace cat6 coupler with other coupler such as fiber adaptor, coax coupler, HDMI, VGA and so on..
  • Detachable Back Bar - This patch panel wall mount is made of cold-rolled thick steel coverd by strong,painting and sanding ABS surface.It can effectively improve the working stability of the network connection port, and avoid the occurrence of network failures caused by loose cornerstones and loose cables..
Check Stock

Patch Panel 24 Port Cat6 10G Support, Rapink Network Patch Panel UTP 19-Inch, Wallmount or Rackmount 1U Ethernet Patch Panel Punch Down Block for Cat6, Cat5e, Cat5 Cabling

  • 【10G Speed Support】This home networking panel support outstanding network connection up to 10G speed Ethernet network..
  • 【Widely Compatiable】Cat6 patch panel 24 port punch down type is compatiable for Cat6, Cat5e, Cat5 cabling. Therefore, this ideal punchdown panel punch can be use as punch panel cat5. This Cat6 patch panel has more expansion and upgrade capabilities than 12 port patch panel and 16 port patch panel, and also can use two of 24 port patch panel cat6 instead of 48 port patch panel..
  • 【1u & 19 inch】24 port patch panel cat6 is 1u height and 19 inch width. Easy to Install this network patch panel wall mount into 19 inch standard wallmount and rackmount or cabinet..
  • 【Gold plated pins】 All 8P8C of network punch panel are golden plated to support better network connection up to 10G speed Ethernet network. 568B labling on 24 port cat6 patch panel offer quick reference for punching down patch panel cat6..
  • 【Cable tie】Ethernet patch panel come with screws and zip tie wraps. With zip ties, it can effectively reduce the deformation of the ethernet cable, improve the working stability of the network connection port, and avoid the occurrence of network failures caused by the loosening and deformation of the cable..
Check Stock

Cable Matters UL Listed Rackmount or Wall Mount 12 Port Patch Panel (RJ45 Patch Panel)

  • Heavy duty 12 port patch panel supports 10G Ethernet and is backwards compatible with Cat5e Ethernet.
  • Future-proof your network connection for 10-Gigabit Ethernet with this durable RJ45 patch panel.
  • Install this Ethernet patch panel effortlessly in universal 19" racks, cabinets, or wall mount brackets with 1U (1.75") standard height.
  • Gold plated contacts ensure a correction free connection. Numbered ports and color-coded T568A and T568B wiring diagram give quick reference.
  • Network patch panel complies with the UL fire safety requirement (E486099). Use included D-rings and cable ties for easy cable management.
Check Stock

iwillink 2-Pack RJ45 connectors Cat6A Tool-Free Shielded RJ45 Termination Plug Connector, Zinc Alloy Metal Housing Ethernet Toolless Plug for 23~26AWG SFTP/UFTP/FUTP Cables

  • Toolless Termination - 24 Port Cat6 pass through Patch Panel came with couplers making it easier to connect the cables without any punching down. Simply plug the Cat6 cable into the 24 RJ45 coupler jacks on either side of the Ethernet panel..
  • Gold Plated Keystone - Gold-plated contacts ensure corrosion-free connections and improve connector durability. This patch panel meets and exceeds industry standards to support better network connections up to 10G Ethernet speed..
  • Rack Mountable - Install this Ethernet patch panel in a standard 1U (1.75") height universal 19" rack, cabinet or wall bracket..
  • Easy Repair - The keystone of coupler patch panel are removable if necessary for replacement or upgrade.Meanwhile, if need expand in the future, you can easliy replace cat6 coupler with other coupler such as fiber adaptor, coax coupler, HDMI, VGA and so on..
  • Detachable Back Bar - This patch panel wall mount is made of cold-rolled thick steel coverd by strong,painting and sanding ABS surface.It can effectively improve the working stability of the network connection port, and avoid the occurrence of network failures caused by loose cornerstones and loose cables..
Check Stock

Tripp Lite 24-Port Cat6 / Cat5 Ethernet Patch Panel, Feedthrough Patch (RJ45 to RJ45), 1U Rackmount, Cable Management Bar, (N254-024)

  • 24 PORT: Tripp Lite’s Cat6 Feed-Through 24-port patch panel provides patching without punching down bulk wire to the back of the panel..
  • CAT6/CAT5 PATCH PANEL: Cat6 RJ45 Jacks on both sides of the panel..
  • CERTIFIED: Fully meets or exceeds Cat6 specifications - works with USOC, T568A, and T568B wiring..
  • EASY INSTALLATION + CABLE MANAGEMENT: 19" width mounts easily in 2-Post Relay Rack, or a Wall-Mount Hinged Rack. Detachable cable management bar keeps patch cables neat and tidy on the back of the panel..
Check Stock

StarTech.com 4U Wall Mount Network Rack - 14 Inch Deep (Low Profile) - 19\ Patch Panel Bracket for Shallow Server and IT Equipment, Network Switches - 44lbs/20kg Weight Capacity, Black (WALLMOUNT4)

  • 4U WALL MOUNT RACK: This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm], recommended for networking equipment up to 12in deep, leaving 2in for cable routing.
  • maximum weight capacity of 44 lbs [20kg].
  • EASY TO INSTALL: The 4U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware.
  • COLD-ROLLED STEEL CONSTRUCTION: The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution & includes wall mounting hardware.
  • Installs onto 16" studs with mounting holes.
  • EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.
Check Stock

Tripp Lite - N060-004 4U Hinged Wall Mount Patch Panel Bracket (N060-004) Black

  • 4U Wall-Mount Hinged Patch Panel Bracket.
  • Keyholes on 16-inch centers plus through-the-wall cabling cut-out.
  • Accepts any standard 19inch Patch Panels.
  • TAA compliant for GSA Schedule purchases.
Check Stock