Best Washer For Inch Bolts
DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack
- TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
- Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
- PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
- T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
- Bolts and washers are 5/16”-18 x 1-1/2-inch.
- Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
- EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
- Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
- BUILT TO LAST: T knobs package includes ....
Check StockDCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack
- TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
- Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
- PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
- T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
- Bolts and washers are 1/4”-20 x 1-1/2-inch.
- Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
- EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
- Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
- BUILT TO LAST: T knobs package includ....
Check StockToilet Seat Bolts Compatible with TOTO Expanding Rubber Top Toilet Seat Hinges Screws Replacement Fixings Nuts Screws Mount Seat Hardware Toilet Repair Screw Toilet Seat Replacement Parts Kit
- 【Universal Application】Fix expanding rubber top nuts screw set blind hole with two expandable ball is great for broken or old toilet seat hinges. Fits for Toto toilets and most standard toilet seats with top fix hinge..
- 【Rubber Bungs】The toilet seat mounting bolts have a threaded section so you can just push them into the holes in the top of the toilet pan and when you tighten the screw it expands and tightens itself into the hole, without the need of a bolt on the other end of the screw..
- 【Top Quality Toilet Bolts】Toilet seat screw replacement parts kit is with rubber bungs and stainless steel screw, ensuring long time use. Hinge blind hole fittings with two expandable ball are suitable for most American standard toilets..
- 【Package includes】Toilet seat hinge bolts and nuts includes: 2 pieces of 2.52inches (6.4cm) black expanding rubber, 2 pieces of 2.99 inches (7.6cm)length bolts, 2 pieces of 0.75 inch (1.9cm) stainless steel gasket and 2 pieces of 0.6 inch (1.5cm) rubber washer..
- 【Top Tightening Seat Mounting Bolts】Toilet seat hinges replacement parts is great for broken or old toilet seat hinges. Toilet seat nut are very easy to fit done in a matter of minutes, simply remove old bolts clean around the area and fit the new bolts..
Check StockPressure Washer Manifold Kit Fits for Briggs Stratton | OE Replacement 16031 190627GS 190574GS 020228, with 4 Bolt Power Pressure Washer Pumps
- Fitment: 4 bolt pressure washer pump unloader manifold kit fits for Craftsman Briggs Stratton Excell, replace oe replacement parts number 16031 / 190627GS / 190574GS / 020228..
- Pressure Washer Excellent Function: The inlet check valve of the pressure washer pump can be inserted completely inside to make the pin more secure, the sturdy alloy casing helps protect the washer pump from damage, advanced manufacturing technology, high reliability and high performance, standard size, can be easily installed without leakage..
- The Method of Installing a Chemical Injector: The tools that need to be prepared include a half-inch wire wrench or a half-inch sleeve, and a long and thin tool for penetrating into narrow places. Use a half-inch line wrench or socket to remove the old chemical syringe from the pump. Make sure that the spring and ball are removed from it and not left in the pump manifold. Install the O-ring and the inside, use a tool to install the O-ring into the internal groove of the injector..
- Package List: 1 × chemical injector + 1 × inlet check valve + 4 × mounting bolts + 4 × mounting o-rings, please compare with your old high pressure washer manifold kit when you buy, and then buy it..
- Customer Service: You will get 24-months service, hassl....
Check StockToilet Floor Bolts and Caps Set Universal Toilet Bowl to Floor Bolts Solid Brass Including 2 Brass Bolts 4 Bolt Caps with Nuts/Washers Toilet Bolts Heavy Duty Bolts Closet Bolt Set Solid Brass
- 1.Toilet Floor Bolts: Secures the toilet bowl to floor flange. T-bolts and nuts are made of solid brass..
- 2.Brass plated components: 2 pcs brass T-bolts, 4 brass plated open end nuts, 4 metal washers, 4 rubber washer, plastic washers..
- 3.High quality bolt caps: High quality plastic constructed bolt caps ensure the durability and life span. 2 pairs bolt caps are in 2 different heights: 1.44 inch and 1.1 inch..
- 4.Installs Easily: Easy DIY project. Toilet floor bolts fit most toilet. We offer manual and you can follow the product instruction step by step..
- 5.Package including: 2 pack toilet floor bolts sets with nuts and washers, 4 toilet bolt caps, 4 white retainer washers, 4 brown retainer washers..
Check StockCOMFEE’ 24' Washer and Dryer Combo, 2.7 cu.ft 26lbs Ventless Washing Machine, Steam Care, Overnight Dry, No Shaking Front Load Combo Washer, Full-Automatic Washing Machine, Dorm White
- 【Wash and Dry in One】COMFEE’s all-in-1 Ventless Washer and Dryer Combo has multi modes to meet different washing demands – steam care, overnight wash and dry, wool setting, reload function, quick wash, pre-wash, delay start, child lock..
- 【Reduces Wrinkles and Odor】 COMFEE’ 2.7 Cu.ft washer and dryer is equipped with steam care, which significantly cares about your health. The steam permeates through fabrics over 30 minutes, removing dust and reducing wrinkles and odor..
- 【Make Clothes Ready Tomorrow】Overnight Wash and Dry is a convenient, time-saving option. Your laundry can be washed and dried in one cycle—no need to move clothes from the washer and place them in the dryer. Dry, clean clothes are ready the next day..
- 【Energy & Space Saving】 With a 23” x 25” x 34” space-saving size, COMFEE’ washer-dryer combo reaches 26Lbs washer and 13Lbs dryer capacities. Compared with a universal motor, the inverter motor improves energy efficiency..
- 【Avoid Moving and Shaking】 Before using the washer and dryer combo. Please remove the transport bolts. 1. Loosen all bolts with a spanner and then remove them. 2. Cover the holes with transport hole plugs. 3. Keep the transport bolts for future use..
Check StockRubber Washer, 1 1/2” OD x 3/8\ ID x 1/4” Heavy Duty Abrasion Resistant Rubber,Black Rubber Washers for Bolts Spacers, Rubber Flat Washer Kit Vibration Suppression Flat Rubber Grommets (50)
- 1.Inside Diameter: 3/8" | Outside Diameter: 1 1/2” | Thickness:1/4” | Quantity: 12pcs | Material: Rubber.you will get 12 pieces of1 1/2 inch rubber washers for bolts, the sufficient quantity can meet your daily use and replacement.More importantly, it can absorb most of the vibration..
- 2.Rubber washer are great to have around for use in various environments.Our hardware is corrosion resistant and will support all of your projects.rubber black washer can be applied as a cushion to avoid vibration breakage.
- It can be installed without cumbersome tools.They can absorb shock to a certain extent to reduce the risk of ..
- 3.These flat washer provides a bearing surface for fastener load distribution and resistance to abrasion.These rubber washers for bolts can be widely applied in daily life, such as for residential and commercial lighting, mounting, metals, counters, robotics, medical equipment, hobby, industrial and more..
- 4.Our rubber washer is made of quality material, which is flexible and elastic, reliable and not easy to loose, and won't leave scratches, ensuring a long time service lifeAnti vibration isolation pad can be applied not only for noise reduction, but also as a foot pad, stopper and more, meeting your various needs..
Check Stock3/4 Inch Go Kart Clutch Bolt Kit Predator Engine Clutch and Lock Washer for Go Kart Minibike and Kart Engine Bolts for 10/12 Teeth Clutch Bolt Kit 2 Sets
- Different quantity to choose: we provide you 2 different quantity of kart clutch bolts kit to choose, namely, 2 sets or 4 sets, you can choose the....
- Features: our predator engine clutch kit includes washer and lock washer, compatible with predator 212 engines and most other 3/4 inch shaft engines,....
- Reliable and durable: our clutch bolt is made of stainless steel material, wear and tear resistant, not easily crack, peel, deform or fade, rust proof....
- Fits most vehicles: our kart clutch bolts kit is suitable for small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers,....
- Convenient to install: our clutch bolt has precise size which is nicely fit for your engines parts, this bolt secures your clutch to your crankshaft....
Check Stock10Sets M8-1.25 65mm 304 Stainless Steel Carriage Bolts, Nuts, Flat Washers Kits, Plain Finish
- SIZE : Thread Diameter: 8mm/0.31inch Length: 65mm/2.56inch.
- Coarse Thread / Fully Threaded/Stainless Steel bolts..
- Precision forged, acid and alkali resistant, corrosion resistant and resistant to oxidation.The thread is smooth and flat, the squat is evenly stressed, and the screw teeth are stronger..
- Carriage bolts are designed to fasten a wooden face to either wood or metal.Flat, smooth head eliminates the need for a washer..
- Due to the head there is no groove type that can be used with a power assisting tool. It can also be hidden during actual use to prevent disassembly..
Check StockW10869845 Dryer Stacking Kit Compatible With Whirlpool Washer And Dryer Replace Number W10298318RP,1862761 52774 AH3407625 By Romalon
- 【Wash and Dry in One】COMFEE's all-in-1 Ventless Washer and Dryer Combo has multi modes to meet different washing demands - steam care, overnight....
- 【Reduces Wrinkles and Odor】 COMFEE' 2.7 Cu.ft washer and dryer is equipped with steam care, which significantly cares about your health. The steam....
- 【Make Clothes Ready Tomorrow】Overnight Wash and Dry is a convenient, time-saving option. Your laundry can be washed and dried in one cycle—no....
- 【Energy & Space Saving】 With a 23'' x 25'' x 34'' space-saving size, COMFEE' washer-dryer combo reaches 26Lbs washer and 13Lbs dryer capacities.....
- 【Avoid Moving and Shaking】 Before using the washer and dryer combo. Please remove the transport bolts. 1. Loosen all bolts with a spanner and then....
Check StockPZRT 50pcs 1/4 Inch 304 Stainless Steel Spring Washer Split Lock Washers, Silver
- 304 stainless steel Inner diameter 1/4 inch split lock washer..
- For use with 1/4 inch bolts and machine screws..
- Great corrosion resistance for outside applications..
- Tensile - 100,000 psi to 125,000 psi, Hardness - 85 Rockwell B..
Check StockRubber Flat Washer Kit, 1/4 Inch Neoprene Washers,1/4 x 1-1/4 x 1/16 Inch Black Repair Rubber Gaskets Abrasion Resistant Neoprene Rubber Washers for Screws Bolts Household Appliances (80)
- Excellent Material: rubber flat washer is made of neoprene rubber, flexible and elastic, reliable and tough, and can be applied for a long period of time.
- Size information: each neoprene rubber washer measures about 1/4 x 1-1/4 x 1/16 inch, the compact size can meet your various needs.
- Easy to use: rubber black washer can be applied as a cushion to avoid vibration breakage.
- It can be installed without cumbersome tools, easy to us.
- A large number of: you will get 80 pieces of 1/4 inch rubber washers for bolts, the sufficient quantity can meet your daily use and replacement.
- Wide range of uses: rubber washers for screws can be widely applied in sheet metal processing, pipes, faucets, household appliances and car repairs and more.
Check StockFOLIV 212PCS SAE Hex Bolts Nuts Flat Spring Washers Assortment Kit, Heavy Duty 304 Stainless Steel, 10 SAE Sizes Included
- GOOD MATERIAL: Made of 304 Stainless Steel, anti-rust and corrosion resistance, FOLIV hex bolts nuts can be used in humid environments..
- DIFFERENT SAE SIZES: our heavy duty hex bolts kit includes 1/4’’- 20 x 3/4’’, 1/4’’- 20 x 1-1/2’’, 1/4’’- 20 x 1’’, 1/4’’- 20 x 2’’, 5/16’’- 18 x3/4'', 5/16’’- 18 x 1'', 5/16’’- 18 x 1-1/2’’, 5/16’’- 18 x 2’’, 3/8’’- 16 x 2-1/2’’ and 3/8’’- 16 x 1-1/2’’..
- Package: 53PCS Hex Bolts +53PCS Hex nut+53PCS Flat washer+53PCS Spring washer are included in the package, suitable for users' needs..
- Easy to carry: All the nuts and bolts are packed in a transparent box with clear size label on it. It is convenient for user to store and use..
- GOOD AFTER-SALE SERVICE: FOLIV provide good after-sale service for our product quality problem. Please feel free to contact us if you have any questions..
Check Stock