Best Water Chiller Unit
Westbrass D203-NL-11 6\ Touch-Flo Style Pure Cold Water Dispenser Faucet, Antique Copper
- Touch-Flo style pure cold water faucet with 6-1/2" in. overall height with 2-5/8 in. spout projection.
- This unit fits counters up to 1-3/8” thick . Adapters available for thicker countertops. Faucet can be mounted in a hole size greater than ½ in. up to 1-3/8 in..
- Can be installed with water filter and/or in-line chiller.
- cannot be modified to use with hot water tank. If using water filter (F400 in-line water filter unit & F400R cartridges sold separately), install between water supply and faucet.
- Single plastic spring piston handle assembly. 1/4 in. compression tube inlet.
- Solid Brass construction. Faucet trim only. Do not use plumber's putty for installation use silicone seal.
Check StockRocita Aquarium Water Chiller 75GAL 1/3HP Fish Tank Water Chiller with Special Quiet Design Compressor Refrigeration for Hydroponic System Axolotl Jellyfish Coral Crystal Shrimp 300L
- Premium Refrigeration Compressor: The compressor adopts r134a refrigerant, circulating cooling, environmental protection, and pollution-free. The temperature of the chiller can be controlled at 68℉-79℉ (20℃-26℃), allowing your plants to grow more luxuriantly and axolotl more freely. It also uses a corrosion-resistant pure titanium pump, which can achieve the best between fresh water and seawater..
- Built-In Fans for Fast Cooling: 2 cooling fans are designed to dissipate heat in time, increase the service life of the compressor and save electricity, and better take care of your chiller. In addition, there are a large number of cooling vents on the 2 sides of the chiller to speed up heat dissipation to keep the water in the fish tank always cool. So leave 6 inches/15 cm of space around the chiller to ensure good air circulation..
- Low-Noise Cooling Work: The special noise-reduction design makes the compressor run very quietly, the low-noise operation will not affect your daily work and rest. And monitors the water temperature in real-time, when the water temperature is higher than the starting temperature, the chiller automatically runs to cool down. After power off and restarting, the chiller will continue to cool according to the original set tem....
Check StockWestbrass D203-NL-50 6\ Touch-Flo Style Pure Cold Water Dispenser Faucet, 1-Pack, Powder Coat White
- Touch-Flo style pure cold water faucet with 6-1/2" in. overall height with 2-5/8 in. spout projection.
- This unit fits counters up to 1-3/8” thick . Adapters available for thicker countertops. Faucet can be mounted in a hole size greater than ½ in. up to 1-3/8 in..
- Can be installed with water filter and/or in-line chiller.
- cannot be modified to use with hot water tank. If using water filter (F400 in-line water filter unit & F400R cartridges sold separately), install between water supply and faucet.
- Single plastic spring piston handle assembly. 1/4 in. compression tube inlet.
- Solid Brass construction. Faucet trim only.
Check StockWestbrass R2031-NL-12 Touch-Flo Style 8 in. Pure Water Dispenser, Oil Rubbed Bronze
- Touch-Flo style pure cold water faucet with 8 in. overall height with 5-1/2 in. 45-degree extended spout projection.
- This unit fits counters up to 1-3/8” thick . Adapters available for thicker countertops. Faucet can be mounted in a hole size greater than ½ in. up to 1-3/8 in..
- Can be installed with water filter and/or in-line chiller.
- cannot be modified to use with hot water tank. If using water filter (F400 in-line water filter unit & F400R cartridges sold separately), install between water supply and faucet.
- Single black plastic spring piston handle assembly. 1/4 in. compression tube inlet.
- Solid Brass construction. Faucet trim only. Do not use plumber's putty for installation use silicone seal.
Check StockWestbrass D2031-NL-05 8\ Touch-Flo Style Pure Cold Water Dispenser Faucet, 1-Pack, Polished Nickel
- Touch-Flo style pure cold water faucet with 8 in. overall height with 5-1/2 in. 45-degree extended spout projection.
- This unit fits counters up to 1-3/8” thick . Adapters available for thicker countertops. Faucet can be mounted in a hole size greater than ½ in. up to 1-3/8 in..
- Can be installed with water filter and/or in-line chiller.
- cannot be modified to use with hot water tank. If using water filter (F400 in-line water filter unit & F400R cartridges sold separately), install between water supply and faucet.
- Single black plastic spring piston handle assembly. 1/4 in. compression tube inlet.
- Solid Brass construction. Faucet trim only. Do not use plumber's putty for installation use silicone seal.
Check StockAquarium Chiller Aquarium Electronic Cooler Fish Cooling System Water Chiller for Water Aquatic Tanks and Sea Water Tanks
- 【EFFECTIVE COOLING】This water chiller can reduce water temperature for 20L-30L fish tanks. It adopts electronic cooling, electronic component....
- 【ESSENTIAL FOR HYDROPONICS AND AQUARIUM】This aquarium chiller can provide more rapid and stable cooling than small fans, can be widely used in....
- 【STEADY WATER TEMP】This fish tank chiller adopts real‑time monitoring of water temperature and automatic constant temperature, temperature....
- 【EASY TO INSTALL】First connect the water pipe to the mouth of the aquarium water chiller. The water chiller does not divide the inlet and outlet.....
- 【100% QUALITY ASSURANCE】We are very confident in the quality of this fish tank cooling system, and provide 12 months warranty or refund for it.....
Check StockPoafamx 16gal Aquarium Chiller Small Water Chiller for Househod Fish Tanks Coral Crystal Shrimp 110V with Pump (Chiller, 60L/16Gal)
- [ELECTRONIC COOLING FOR SMALL TANKS] This small aquarium chiller uses electronic refrigeration technology, no need to add refrigerant, which is efficient for small fish tank cooling and with low noise, less than 45db.
- [ACCURATE & STABLE TEMPERATURE CONTROL] Probe on the back of the water chiller must be put fully into the water, so that the controller can detect and maintain the water temperature as you desired accurately.
- [WELL FOR ORNAMENTAL FISH] 16gal fish tank chiller is ideal for household small aquariums. The temperature reduction will not be very severe, it can give your fish a process of adaptation, and finally provide a comfortable living environment, about 2-5F lower than the room temp.
- [SMOOTH WATER CIRCULATION] Equipped with a small water pump, it's easy to disassemble and clean. To ensure a smooth water supply, we recommend that the distance between the chiller and the pump be limited to 19 inches.
- [SIMPLE INSTALLATION] Aquarium water chiller is equipped with a 2.1m/82.7 inch long water pipe, you just need to cut it into 2 pieces and connect them with the chi....
Check StockVortex Refrigeration Freezer 3 Solid Door Commercial Stainless Steel - 72 Cu. Ft. High Performance!
- ...HZ. Refrigerant: R404a. FOOD SAFE PRESERVING TECHNOLOGY Throughout years of experience and research, we formed a sophisticated air curtain system that preserves a constant temperature range of 35.6°F~50°F and the temperature difference is only 4F among all shelves..
- GRAB & GO BOOST YOUR SALES! This commercial open chiller is a good grab and goes solution for beverage, yogurt, salad, and other chilled food. It takes a small footprint but maximizes commodity display. High brightness vertical LED lights on the top side, the vivid branding and the freshness of the food is presented to the customer on a black background..
- ECO-FRIENDLY In order to save your electricity bill and be friendly to the environment, we have applied the latest energy-saving technologies in this equipment. We use a very high-efficiency compressor, ECM fan motors and energy-saving LED lights, these units are approved with DOE latest standard. Moreover, you can pull down night curtains to reduce energy consumption after business hours..
- EASY TO USE You need only to plug in the unit. With a build-in auto evaporation system, you don't have to worry about the drainage water which is the most troublesome work in using an open chiller. Our engineer has tested the unit in different humid am....
Check StockBestEquip Cooling System CW5200DG Industrial Water Chiller CW-5200 White
- Product Parameter: The CW-5200DG industrial water cooler chiller is 8.5L capacity, Using standard R470C refrigerant,10L/max.flow, Precision:....
- Efficient Cooling Fan: The water cooler chiller has two professional forced air-cooled radiators, high heat dissipating capacity, and not easy to be....
- Constant & Intelligent Temperature Mode: CW-5200 series industrial chiller can be used to cool high-power lasers. Two working temperature modes are....
- Various Alarm Functions: This professional industrial chiller has multiple warning protection mechanisms such as water flow alarm protection, high/low....
- Multiple Application: CW-5200 Series professional industrial water cooler machine is suitable for small water-cooled cooling devices requested....
Check StockProcool Refrigeration Double SLIDING Door Upright Display Beverage Cooler Merchandiser; 35 Cubic Ft, 45\ Wide
- ...e and research, we formed a sophisticated air curtain system that preserves a constant temperature range of 30.2°F~44.6°F and the temperature difference is only 4F among all shelves.The spacious capacity of 18 Cuft allow you show more merchandises to your customer..
- GRAB & GO BOOST YOUR SALES! This commercial open chiller is a good grab and goes solution for beverage, yogurt, salad, and other chilled food. It takes a small footprint but maximizes commodity display. High brightness vertical LED lights on the top side, the vivid branding and the freshness of the food is presented to the customer on a black background..
- ECO-FRIENDLY In order to save your electricity bill and be friendly to the environment, we have applied the latest energy-saving technologies in this equipment. We use a very high-efficiency compressor, ECM fan motors and energy-saving LED lights, these units are approved with DOE latest standard. Moreover, you can pull down night curtains to reduce energy consumption after business hours..
- EASY TO USE You need only to plug in the unit. With a build-in auto evaporation system, you don't have to worry about the drainage water which is the most troublesome work in using an open chiller. Our engineer has tested the unit in different humid am....
Check StockWestbrass D205HPF-12 Victorian 9" Hot/Cold Water Dispenser & Tank, Oil Rubbed Bronze
- Contemporary dual handle hot and cold water dispenser kit.
- Two (2) lever handles with 1/4-turn ceramic disc cartridges.
- 10-5/8 in. overall height with 3-1/4 in. gooseneck spout projection.
- 1/4 in. copper tubing and Santoprene hose outlet to tank.
- Quick heating water tank included (QHT-1).
- in-line water chiller (IWC-1) optional for cold handle.
- Do not use plumber’s putty for installation use silicone seal. If using water filter, install between water supply and hot unit.
Check StockWestbrass D2033-NL-11 10\ Classic 1-Lever Handle Cold Water Dispenser Faucet, Antique Copper
- Classic solid brass single lever handle cold water dispenser faucet. 10-1/2 in. Overall height with 5 in. Gooseneck spout projection.
- Single lever handle with 1/4-turn ceramic disc cartridge. 1/4 in. Compression tube inlet.
- Can be installed with water filter (F400) and/or in-line chiller.
- cannot be modified to use with hot water tank.
- FILTER RECOMMENDATION: If using water filter (F400 in-line water filter unit & F400R cartridges sold separately), install between water supply and Faucet.
- Faucet trim only. Do not use plumber's putty for installation use silicone seal.
Check StockColdbreak Homebrew 6-11 Gallon Batch Copper Immersion Wort Chiller, Large, 3/8” x 60' Pure Copper, Leak Free Compression Barbs, Tubing and Garden Hose Fitting, USA Made
- No wort clogging and save cost while ensuring high cooling efficiency: Compared to plate chiller, this counterflow wort chiller has a wider wort cooling area, the tube wall is thin enough, don't need to make whirlpool, no clogging, cooling efficiency can be comparable to the 60-plate wort chiller.
- works with the principle of gravity caused by position difference, don't need pump driving, don’t need to buy hose connector fittings separately, which will reduce your wort cooling costs perfectly!.
- Used outside the mash tun and reduce brewing taste damage: Compared to the immersion type, this counterflow wort chiller has much less risk of getting any wild yeast into the pot to damage wort taste since it is used outside the brewing kettle, won't interfere hop additions, don't need to worry about the surface oil occurring, smaller size for easy storage, chills beer fastly since chilling and transfer to the fermenter are done simultaneously, uses less water!.
- Faster and less hassle than making an ice bath for your wort: With this counterflow hot liquid accelerated cooler, no more filling the sink with ice water and having to replace ice several times, no more long waiting hours to get to proper temperature cooling your wort, only several mins to get to ....
Check Stock