Categories

Best Water Distributor

Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350

  • 【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
  • 【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
  • 【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
  • 【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..
Check Stock

Ignition Distributor Cap and Rotor Kit, Replace D328A 10452458 D465 Compatible with Chevy GMC 4.3 Vortec - 1996-2005 Astro, 1995-2005 Blazer, 1995-2004 S10, 1999-2006 Silverado, 1995-2001 Jimmy, More

  • REPLACeMENT IGNITION DISTRIBUTOR CAP AND ROTOR KIT : The distributor cap and rotor kit is located under the car's hood. Open the hood and look for a black component near the centre of the engine. The distributor caps are stress-relieved immediately after molding to ensure dimensional stability. Symptoms of a bad or failing distributor cap: The CEL is illuminated, the vehicle does not start, the engine idles rough. If you find the distributor cap worn out or cracked, replace it immediately..
  • COMPATIBLE WITH CHEVY, OLDSMOBILE VEHICLES : 4.3L V6 Vortec engine - 1996-2005 Astro | 1995-2005 Blazer | 1996-1998 C1500 | 1996-2007 Express 1500 | 1996-2005 Express 2500 | 1996-1998 K1500 | 1996-1999 P30 | 1995-2004 S10 | 1999-2006 Silverado 1500 | 2007 Silverado 1500 Classic | 1996-2001 Bravada ignition distributor cap and rotor kit..
  • REPLACES PART # : D328A, 10452458, D465, 10452457 ignition distributor cap and rotor kit. It can compatible with GMC 4.3L V6 Vortec : 1996-1998 C1500 | 1995-2001 Jimmy | 1996-1998 K1500 | 1996-1999 P3500 | 1996-2005 Safari | 1996-2007 Savana 1500 | 1996-2005 Savana 2500 | 1997-2002 Savana 3500 | 1999-2006 Sierra 1500 | 2007 Sierra 1500 Classic | 1995-2004 Sonoma. Please check the detailed description to confirm the compatibilit....
Check Stock

ROADFAR Ignition Distributor Cap and Rotor Fit for DR475 Compatible with Chev-y Astro/Blazer/Express GMC Jimmy/Safari/Sierra/Sonoma 1995-2007

  • DISTRIBUTOR CAP FITMENTChevy Astro/ Blazer /Express GMC Jimmy/ Safari/ Sierra/ Sonoma 1995-2007.
  • REPLACEMENT PART NUMBERSDR475 12570426 1103417 1104078 1103976 1103917 12598210 01104078 93441559.
  • EXCELLENT PERFORMANCEConsidering the special environment of the distributor cap, we specially choose the material which can resist high temperature, vibration and high voltage current.
  • FAST INSTALLATIONThe replacement of the distributor cap is very easy and fast, but the spark plug wires must be connected to the new distributor cap in the same position.
  • REGULAR REPLACEMENTBecause the distributor cap is often affected by heat and vibration, the distributor cap will rupture, or carbon deposits on the cap will cause it to not work properly and start up difficult. So the old distributor needs to be replaced regularly.
Check Stock

NEW HOLLEY SNIPER EFI HYPERSPARK DISTRIBUTOR FOR CD IGNITION BOX, COMPATIBLE WITH CHEVY SMALL & BIG BLOCK

  • Brand New Holley Sniper EFI HyperSpark Distributor, Compatible with Chevy Small Block & Big Block (Part #565-300).
  • Features: Hall Effect crank trigger sensor housing provides a noise-free RPM signal to the Sniper ECU | Billet distributor housing provides corrosion resistance and stylish looks! | Patented Clear Installation cap eliminates any confusion while installing the distributor | Easiest plug and play way to add timing control to a Sniper EFI Installation | Distributor shutter wheel is pinned and welded to the shaft, for decades of reliable accuracy | Includes Wire Retainer for a clean installation |.
  • Comes with Cast Gear Installed - contact camshaft manufacturer for recommended gear material | Designed to be used with Sniper EFI HyperSpark CD box P/N 556-151 and Ignition Coil 556-152.
  • Specs: Brand: Holley Sniper EFI | Emission Code: 3 | Material: Shiny Billet Aluminum | Product Type: Distributor.
  • HyperSpark distributors are plug and play with all Holley Sniper EFI systems, featuring a high-quality billet distributor housing, hall effect crank trigger sensor, and they com....
Check Stock

WFLNHB 8Pin Distributor Adapter Obd1 to Obd2 Jumper Harness Dizzy fit for Honda Acura E3

  • This Distributor Adapter Fit For 1999-2000 Civic.
  • (Does Not Work For Dohc / Si Model)With An 8-Position Distributor Plug, To Plug Into A Obd1 (92-95) Distributor..
  • Package Included:1 X Distributor adapter.
Check Stock

Unlimited Rider Engine Harness OBD2 8-Pin to OBD2 10-Pin DISTRIBUTOR ADAPTER JUMPER HARNESS For HONDA Civic 1999-2000 Single Overhead Cam Civic with an 8-pin Distributor Plug 1.6L 1590cc

  • This adapter is made for a 1999-2000 single overhead cam Civic with an 8-pin distributor plug converting to a OBD2 10-pin distributor..
  • Plug and play, no modifications required.
  • This is an exact replacement DISTRIBUTOR ADAPTER JUMPER HARNESS for your model..
  • Trust this DISTRIBUTOR ADAPTER JUMPER HARNESS to work perfectly in demanding conditions..
  • PLEASE LOOK AT THE PICTURE TO MAKE SURE IT WILL ADAPTER TO YOUR DISTRIBUTOR, MANY THANKS..
Check Stock

51mm Coffee Distributor and Tamper, Espresso Distributor and Espresso Tamper, Espresso Distribution Tool for All 51mm Espresso Portafilter, Depth-adjustable Coffee Leveler, Detachable Tamper

  • ★Dual Head: Distributor/Leveler and tamper are designed in one, double sides are available. The unique four-page propeller design ensures that your coffee powder are balanced..
  • ★More Convenient: You can adjust the depth of this Espresso Distributor to the position you need. And with the scale, you only need to adjust one side, and the other side is adjusted to the corresponding position. Our espresso tamper is more convenient to use..
  • ★Safe Material: This coffee distributor is made of food-grade 304 stainless steel, it enables you to feel reassurance when you make espresso. Plus, every part of this espresso tamp is removable, this makes it easy to clean..
  • ★51mm Coffee Distributor & Tamper: This 51mm Coffee distributor and hand tamper are specially designed to work with all 51mm espresso portafilter, including Delonghi EC0680, EC0685 bottomless portafilter..
  • ★Simple to Use: With a simple twist to adjust the depth, then you can use the paddle surface to even out the coffee powder before tamping it with the flat surface. If you have any questions with the coffee distribu....
Check Stock

1 PC SHLPDFM Natural aluminum Intake Manifold Dual Plane Intake Manifold Compatible with 1957-1995 SBC Small Block Chevy 350 400 Idle-5500RPM Manifold

  • ★Compatible with 1957-95 Small Block Chevy 283 327 350 Manifold..
  • ★Dual carb pattern, accepts spread bore such as Quadrajets and includes adapter for use with square bore carbs like Holley.
  • ★Provision for exhaust heated choke and crossover for street applications.
  • For street applications use 600-700 cfm vacuum secondary carbs.For high performance streets, use 700- 800 cfm double pumper carburetors..
  • ★180°dual plane design,Four corner water outlets,Dual distributor hold-down provisions for extra protection against distributor rotation..
Check Stock

MSD CRATE IGNITION KIT,READY-TO-RUN DISTRIBUTOR,BLASTER SS COIL,8.5MM SPARK PLUG WIRES WITH SEPARATORS & BILLET HOLD-DOWN CLAMP,COMPATIBLE WITH FORD 351W ENGINES

  • Brand New MSD Crate Ignition Kit, Compatible with Ford 351W Engines, Produced by Holley Performance Products (Part #84746).
  • Includes: Built-in Rev Limiter | Ready-to-Run Distributor | Blaster SS Coil | 8.5mm Spark Plug Wires with separators | Billet hold-down clamp.
  • Specs: Brand: MSD | Color: Red | Distributor Type: Ready To Run | Emission Code: 3 | Engine: Ford 351W | Gear: Steel | Product Type: Distributor.
  • These kits are supplied with everything you need for your ignition. The Ready-to-Run distributor is a great choice for your engine. They feature a high output module that produces a vigorous jolt across the plug gap and the installation is simple with just three wires to connect!.
  • The Blaster SS Coil is a compact and efficient coil that is easy to mount and the system is complemented with MSD's red 8.5mm Super Conductor wires. The wires are supplied as a universal fit, with our straight/multi-angle boots and terminals on the spark plug side and after you route them and cut to length, you simply install the distributor side terminal and boot. Our Pro-Clamp separators keep ....
Check Stock

Big Autoparts D328A D465 DR475 DR331 Brass Terminals Distributor Cap and Rotor Kit Compatible With Chevrolet GMC Oldsmobile Cadillac 1995-2007 10452457 10452458

  • Distributor cap efficient prevents arc through and crossfire. Delivers unrestricted spark energy flow, maximum energy transfer, and more power..
  • Distributor cap and rotor sends high secondary current to the proper ignition wire..
  • Provides superior performance and reliability.Meets or exceed the original factory distributor cap standard quality and 100% warranty in 12 months..
  • Compatible original part number DR475, D328A, DR2030G, 3D1062, 51-4258, D465, 10452457, 10452458.Include installed screw and fast easy install distributor cap and rotor kit replacement..
  • Distributor cap and rotor compatible with Cadillac Escalade.
  • Chevrolet Astro,Avalanche,Blazer,C1500,C2500,C3500,Express,G10,G1500,G20,G2500,G30,G3500,K1500,K2500,K3500,P30,S10,Silverado,Suburban,Tahoe.
  • Gmc C1500,C2500,C3500,G15,G1500,G25,G2500,G35,G3500,Jimmy,K1500,K2500,K3500,Safari,Savana,Sierra,Silverado,Sonoma,Yukon.
Check Stock

CARMOCAR Performance replacement for Chevy/gm SBC BBC Small Block/big Block 65k coil 7500RPM Hei Distributor 350 454 302 V8

  • It is a new HEI distributor for small block/big block replacement for Chevys..
  • Hei distributor:direct fit for GM application utilizing the 4-pin ignition module..
  • HEI Complete Distributor:283, 305, 307, 327, 350, and 400 small blocks, and 396, 427, and 454 big blocks. Red cap.
  • High Quality: Heavy duty construction, high grade hardened steel gears. OE+ durability.75,000 high voltage coil spark through 9,000 RPM, upgrade for racing application.
  • About service - HEI distributor ,the customer service period is 1 year ..
Check Stock

Vorceary Espresso Coffee Stirrer, Coffee Stirring Tool, Espresso Distribution with Natural Wood Handle and Stand NeedleType, Professional Barista Hand Distribution Tool

  • 【MAKE THE COFFEE POWDER SMOOTH】: The coffee distributor can make the coffee powder more smooth, effectively reducing the agglomeration of fine powder and the size is suitable for all portafilters..
  • 【304 STAINLESS STEEL MATERIAL】: The coffee distributor is made of 304 stainless steel in high quality，They are anti-corrosion and rust-proof, effectively expanding the mixing area..
  • 【HIGH-GRADE WOODEN HANDLE AND STAND】: The handle is made of high-quality log, which makes the appearance of this coffee distributor more beautiful but also has a thick and stable overall, comfortable grip, and is not easy to slip，You should have such a professional barista tool..
  • 【PRACTICAL TOOLS AND ACCESSORIES】: The set includes a coffee stirrer, cleaning brush and gift bag. The coffee distributor can be separated from the handle, and it is easy to clean thoroughly with the brush..
  • 【GREAT GIFT FOR A PROFESSIONAL BARISTA】: The coffee distributor tools with exquisite workmanship and wonderful appearance are ideal gifts for friends, family, neighbors, and colleagues who love coffee..
Check Stock

Red Male HEI Distributor Cap and Rotor for K549 SBC 283 305 307 327 350 400 BBC 454 396 427 Distributor Cap Assembly

  • Package: The package comes with 13 pieces distributor cap kit including a red cap and some assembly accessories. You can take the pics for a....
  • Compatibility: This distributor cap kits replacement is compatible with most Chevy, Ford, Mopar HEI aftermarket distributors. For more detail info,....
  • Reference Part Number: This replacement distributor cap kit can be widely used for K549 SBC 283 305 307 327 350 400 BBC 454 396 427..
  • Permium Quality: The distributor is constructed with high quality voltage insulating material. It gives the part long life performce. The OE standard....
  • Warranty: We offer 30 days free return and 365 days free replacement. 100% satisfaction..
Check Stock