Categories

Best Water Hose Quick Connect Fittings

HQMPC Garden Hose Quick Connect Solid Brass Quick Connector Garden Hose Fitting Water Hose Connectors 3/4 inch GHT (2Sets) (2Female+2Male)

  • ...est brass garden quick connectors for your garden hose.You can reply on our service of 3 years gurantee. Just order HQMPC brass garden hose quick connectors with your prime. If you have any slightest problem with these products,we will 100% refund to you or replace a new set for you.
  • ★【Quick Connect Garden Hose Fittings Can Stand Up to 200 PSI】-Stand up to 200 PSI,gives the Easy Connect Fitting continuous water flow and it’s a great tool to complete your garden accessories and water hose connect.Easy to connect and disconnect..
  • ★【Quick & Easy Connector】- 1-Handed Operation.Convenient to install with garden hose connector.Easy Off-And-On adapter provides a tight, secure Fit, no-Leak connection.Just need several seconds to install it on your water hose end..
  • ★【Standard 3/4 Inch GHT Garden Hose Quick Connect】- You will get 3 brass female connectors +3 brass male connectors+4 free washers.You can enjoy it work perfectly with any standard garden hose,faucets,hose bibs and watering devices..
Check Stock

Redneck Convent Dual Water Feed Boat Motor Flusher Rectangular Cup Muffs with Hose Fittings Flush Kit – Marine Outboard Engine Flushing

  • ULTIMATE DUAL FEED FLUSHER: Use the Redneck Convent Dual Water Feed Boat Motor Flusher Rectangular Cup Muffs with Hose Fittings Flush Kit – Marine Outboard Engine Flushing to obliterate salt and mineral build up along with other contaminants from your outboard boat engine’s lower unit cooling system when hooked up to a garden hose.
  • Effective way to flush engine with fresh water to prevent clogging and corrosion and allow for engine adjustments.
  • EASY INSTALLATION: Requires no tools for installation or removal.
  • Simply slide the flusher muff cups over the top of the water intake slots on your boat and connect your garden hose to one of the included quick connect fittings to run motor out of the water or use to winterize motor.
  • Never turn water supply to full force or damage to drive may occur.
  • FITS YOUR BOAT: Compatible with most Johnson/Evinrude, Mercury, Yamaha, Chrysler, Force, Honda, Nissan, Suzuki, and Tohatsu outdrives.
  • As long as your boat includes side water inlet ports, this flusher is for you.
  • Rotate muff ears to fit and seal over the water pick-ups on the lower unit (cups swivel to be positioned horizontally or vertically for a multitude of ways to put it on).
  • NO LEAKAGE: Inferior round cups do not always fit correctly over intake ports, but....
Check Stock

M MINGLE Ultimate Pressure Washer Adapter Set, Quick Disconnect Kit, M22 Swivel to 3/8 Inch Quick Connect, 3/4 Inch to Quick Release, 8-Pack

  • ATTENTION: M22 14 mm swivel fitting has 14 mm inside diameter, NOT 15mm. NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz. If washer needs 15 mm, may cause leakage..
  • 8-pack universal Pressure Washer Adapter Set, 4 kinds of couplers includes: Metric M22-14 swivel female + 3/8’’ plug, 3/8’’ quick disconnect + M22 male, 3/4’’ female + 1/2’’ quick connect, 1/2’’ plug+ 3/4’’ male..
  • Two Quick Connector Sets connect water outlet of pump to pressure washer hose or connect pressure washer hose to gun. The other two Quick Connect Kits converts 3/4’’ threads to quick release fittings, connecting all 3/4" standard garden hose to water inlet of power washer pump..
  • High replacement couplers provide secure and quick fittings, easy to connect and disconnect. Max. Pressure is up to 5000 PSI..
  • M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

Jeeker Garden Hose Repair Kit, Zinc and Aluminum Male and Female Hose End, Suitable for 3/4 Inch and 5/8 Inch Garden Hoses (2Sets)(2Female+2Male)

  • 【PACKAGE】We offer you 2 couples of male & female hose repair kits, 2 Sealing tapes and 4 pieces rubber washers. The reusable water hose repair kit features premium constructions..
  • 【MATERIAL】The garden hose repair fittings are made of high-quality aluminum, the clamps are made of zinc, the screws are made of stainless steel..
  • 【SIZE】The quick connect garden hose fittings are designed basing on the inner diameter of the 16mm and 19mm hoses, so they match well with the devices which accept 5/8 inches connection or 3/4 inches connection..
  • 【CONVENIENCE】The water hose repair kit is equipped with thread design, so you can connect the male hose end repair and the female hose connector easily and quickly..
  • 【SATISFACTION】100% customer guarantee, just contact us if you are not 100% satisfied with your water hose connectors and fittings, then we will support 100% service for your satisfaction..
Check Stock

3/4" Garden Hose Quick Connector Value Pack

  • 3/4 in.*3/4 in. NH Thread,Excellent value and quality, It’s perfect for garden hoses and power washer, RV, boat or anywhere there’s a standard 3/4″ garden hose connection,work with your camper, sprayers,nozzle, tree soaker etc.★Easy to Connect and Disconnect★..
  • NOTICE:Used for garden watering tools only,Used with a pressure under 60 psi..
  • PLG Brand Without flow stopper,KEEP water flowing.Made from High Quality Aluminum, Meet EU Aluminum Quality Standards,Very LOW Lead Content(Ava<.
  • The garden hose connectors help you quick connect & disconnect the hose in the cold weather,No need unscrew and screw on the hose..
  • No leaks,quick connect hose fittings,Durable metal construction,Comfortable rubber grips.Includes 2 female quick connects and 2 male quick connects,Quickly Attached..
Check Stock

STYDDI Brass Garden Hose Quick Release Connect Adaptor Fitting, High Flow Solid Brass Water Hose Quick Disconnect Connector Coupler with Male and Female, with 4 Hose Washers - 3 Sets

  • ...he hose or wrestle with other unwieldy parts to get the sprinkler to stay flat. Switching between various connections is also with no hassles. This quick screw and unscrew system saves you valuable time and reduces your work also..
  • If you are struggling big time to connect and disconnect the garden hose to different fittings, then this set of garden hose quick connector will make a huge difference. Not only will they save you time in checking for leaks but they can also significantly improve your water usage, turning your outside chores into a relaxing and pleasant experience. Making your life easier with STYDDI brass garden hose quick connect..
Check Stock

M MINGLE Garden Hose Quick Connect Fittings, 3/4 Inch GHT Solid Brass, Quick Connector Set, 2-Pack

  • High replacement water hose adapter provide secure and quick fittings, easy to connect and disconnect..
  • AMZ Tool is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
  • Include 2 pair durable and leak-free water hose quick connector sets. Made of solid brass..
  • Standard 3/4 inch fitting. Quick connect garden hose end to faucet, sprayer nozzle or pressure washer pump. Fit any 3/4″ GHT (garden hose thread) watering equipment. Not Fit 1/2″ GHT, 7/16″ GHT(garden hose thread) watering equipment..
Check Stock

Triumpeek 3/4

  • VERSATILE APPLICATION: Triumpeek quick release hose connector is widely used for garden hose, water line connector, faucet, water washer pressure, lawn sprinkler, water nozzle and other garden accessory..
  • EASY TO USE: It takes only a few seconds to screw on and connect. The ergonomically-designed valve is very comfortable to handle, and greatly easy to turn on/off, adjust and control the flow..
  • PREMIUM MATERIAL: Triumpeek quick release hose connector is made of high quality plastic and rustproof brass, lasting and durable. All the connectors and fittings are precisely processed. The O-ring rubber washer provides a tight fit and leak-free connection..
  • PACKAGE INCLUDING brass garden hose shut off valve*2, and extra garden hose rubber washers for replacement*2..
  • UNIVERSALLY APPLICABLE: Tirumpeek 3/4″ brass shut off valve garden hose connector fits for all 3/4″ standard garden hose and makes connection and disconnection easier..
Check Stock

POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male

  • 14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
  • Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
  • M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
  • High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
  • Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..
Check Stock

Twinkle Star Pressure Washer Brass Quick Coupler Fittings,3/8 Inch Quick Connect NPT to M22 Metric Fitting,Set of 2,TWIS259

  • 3/8" QD + M22 male, Provides secure and quick fittings, set of 2.
  • Gives you Quick-Connect fittings to create easy pump-to-hose and hose-to-gun connections.
  • Compatible with most M22 and quick-connect fittings on pressure washers.
Check Stock

Set of Brass Male and Female 3/4 Inch Water Hose Quick Connect Fitting Garden Quick Release Hose Connector

  • Garden hose quick connect fittings are made of solid brass. Heavy-duty brass construction with rust proof, no-leak..
  • Easy Off-And-On adapter connection allows you to connect and disconnect with no effort. Just a few seconds to install it. Quick and easy connections to faucet, hose, and hose end accessories..
  • Standard US 3/4 inch thread, easy to used for garden hoses, watering device pressure washer, faucets, lawn sprinkler, water nozzle..
  • Includes external thread female quick connector, internal thread male adapter..
Check Stock

abcGoodefg 4 Sets Brass Garden Hose Mender Female and Male Hose Connector 5/8 Hose Fittings Garden Hose Adapter Water Hose End Replacement Repair Kit with Clamp and Rubber Gaskets

  • ...o repair and connect the water hose end. Easy to connect and disconnect when replacing the end of the garden hose, quick and easy, no additional tools are required, just by hand, suitable for using with garden hose, pipe tubing, and water equipment system, hose repair mender, etc..
  • Sturdy material — These hose fittings are made of brass, which is rustproof, corrosion resistance and durable, and the stainless steel hoop clamp can avoid garden hose leakage..
  • Packge Included — 4 Male Mender + 4 Female Mender + 8pcs stainless tightening clamp + 4 pcs rubber gaskets. Stainless clamp width is 10mm..
Check Stock

Utah Pneumatic Push To Connect Air Line Fittings 1/4'Od Union Straight Tube Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)

  • SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
  • Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
  • Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
  • It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
  • this enhances the installation of the push connect fittings process in a narrow space.
  • These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....
Check Stock