CQRobot Ocean: Contact Water/Liquid Level Sensor Compatible with Raspberry Pi/Arduino. for Automatic Irrigation Systems, Aquariums, Plants, in The Garden, in Agriculture etc.
- Contact Water/Liquid Level Sensor, This is a photoelectric water liquid level sensor that is operates using optical principles. Open collector output mode, suitable for connecting various circuits and product applications..
- The sensor has no mechanical parts, requires no additional adjustment, and has high sensitivity, low power consumption, corrosion resistance, high pressure resistance, high temperature resistance and chemical stability..
- This sensor probe is small in size and has a structure that can be placed up, down, laterally, and diagonally in multiple orientations to detect solution spillage, dryness and horizontal level. Can be used as a reminder and alarm function..
- The sensor has a DIP switch. The DIP switch controls the output voltage (high level) of the signal terminal (green line). When the DIP switch is dialed to 5V, the high level is 5V. When the DIP switch is dialed At 3V, the high level is 3.3V..
- Compatible with Arduino motherboard and Raspberry Pi motherboard. for Automatic Irrigation Systems, Aquariums, Plants, in The Garden, in Agriculture etc..
Check StockBioCube Size 29 & Size 32 Replacement Pump
- Type: 2PCS M16 Water Level Sensor, Switching voltage (Max): 110V DC.
- Float level switch is a kind of liquid level control device with simple structure, no external power supply, no complicated circuit, convenient to use. Has the advantage of smaller size and longer service life than mechanical switch..
- Mainly used to sense the liquid level in a tank to turn on/off a pump, an indicator , an alarm or other device..
- 2 Way optional to install as normally closed/open switch according to your needs..
- Suitable for hydroponics, saltwater , freshwater , gardening, aquariums for power control, pet bowls, fish tanks, filtration, heating etc..
Check StockSwitch Liquid Controller ，110V Water Level Sensor Vertical Float Switch for Aquarium Pump Control Liquid Controller
- 【high stability】--Float Switch Liquid Controller has strong anti-interference with high stability. The measurement is very accurate and will not....
- 【features】--Plastic Liquid Level Sensors has a non-toxic, corrosion-resistant features. Very safe to use.
- 【easy to install】--Water Level Controller is easy to install, convenient to use, and long service life.It is also very easy to operate and has a....
- 【 low power consumption】--Float Water Level Switch has a small size, simple wiring, so has low power consumption.Reduce unnecessary losses.
- 【widely used】--The product can be widely used in water supply, drainage and liquid level automatic control with a variety of pump....
Check StockRule 500 GPH 25SA Electronic Sensing Bilge Pump-500
- Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
- 【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
- 【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
- 【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
- 【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..
Check Stock
Bilge Float Switch, Huazu Automatic Bilge Pump Float Switch Rule Float Switch DC 12V 24V 32V for Boats Ignition Protected Mercury Free
- DURABLE: The shell of bilge pump float switch is made of high-quality ABS material, which has high strength and durability, and the internal metal contacts ensure reliable start/stop. The switch can be removed from the base for easy cleaning and servicing..
- USE WITH PUMPS: The bilge float switch is automatic and can be connected to various submersible pumps, bilge pumps, and water pumps. Turn the pump on when the water level reaches 2″ (51mm) and turn off the pump when the water level reaches 3/4″ (19mm)..
- PERFORMANCE: The switching frequency is up to 10 million times, which can be used for a long time.
- ultrasonic welding forms a seal, reliable and safe, not leaking..
- SPECIFICATION: Max Amps 12volts: 20A / Max Amps 24volts: 10A / Max Amps 32volts: 8A.
- WIDE APPLICATION: This automatic float switch can be widely used in fishing boats, cruisers, runabouts, yachts, aquariums, small swimming pools, water reservoirs, fountains and other places that need drain the water..
Check StockRosewill R-HAP-15002 1 Gallon Electric Water Warmer, Boiler and Dispenser (4.0 L)
- Water boiler and warmer with a large 4.2 Quart (4 Liter) capacity.
- One-touch electric dispenser switch under spout : Electric dispense and Cup switch.
- Big Windows Water-level gauge with blue light: Easy to read water level with low light.
- Micro computerized temperature control system: 3 Temperature settings – tea (208°F), coffee (185°F), and (instant soup, hot cereal, etc. (149°F).
- Dry-boiled protection , Stainless steel outer shell and inner pot.
Check StockOptimum Pool Technologies Replacement Flow Switch for Pentair IntelliChlor IC20 & IC40 Salt Cell - Replaces 520736
- Replaces: Pentair Intellichlor Flow / Temp Switch Model Number 520736 (IC-20 & IC-40 Systems).
- 4 Wire connection, Arrow on switch indications the direction of water flow, ensuring proper installation.
- Manufactured by Optimum Pool Technologies. Please see product video for installation instructions..
- Does not read salt level* This product ONLY fixes water FLOW and water TEMP issues with the IntelliChlor Salt Cells. THIS DOESN'T READ THE SALT LEVEL. THIS WILL NOT FIX A LOW SALT READING..
- Refer to Troubleshooting Tips as well as Wiring Diagrams on this product page for product assistance. Red and Black/Blue wires detect the flow, White and Green wires read temperature. If replacing this flow switch doesn't fix the salt cell problem, it is likely that the whole cell needs to be replaced..
Check Stock
Carefree 95663 Small Fountain Protector, 4-Ounce
- MAINTAIN WATER LEVEL: This water auto fill system uses float water level floating principle to control the inlet and outlet water switch, automatically keeping the water level of the fountain constantly consistent, the water volume is sufficient, and the water is always clean. So there is no need to worry that the fountain will dry up, saving your manual filling trouble..
- WATER AUTO FILL KIT: Includes 10 feet of 1/4" tubing, float unit with stainless steel base, fitting for hose or faucet connection and fitting for 1/2" threaded irrigation line. Its simple adjustable water level float, which you can flexibly set the angle according to the requirements of the water level, keeps the fountain at the required water level between 3 and 8 inches.
- an float extender provided for water deeper than 6 inches..
- PREMIUM PRODUCT: All components of the water auto fill system are made of plastic or stainless steel to prevent rust, oxidation, corrosion, etc. Easy to maintain, easy to replace accessories and easy to use. Small compact set..
- QUICK INSTALLATION: Comes with complete instructions for easy installation. Includes 2 screws to mount the kit..
- GOOD HELPER: Suitable for bird baths tiered fountains, sidewall fountains and ponds. just set it and forget it. It is abso....
Check Stock
Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire
- What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily.
- Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts).
- Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m.
- The float switch's max amps 12 volts: 20 A.
- The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG.
- Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently.
- It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure.
- Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm).
- It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning.
- Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and mo....
Check StockAmarine Made 12V 1100 GPH Auto Submersible Boat Bilge Water Pump with Float Switch 3/4 inch Outlet, Automatic All-in-one 3.2A Ignition Protected Marine Emergency Pump for Saltwater Freshwater
- Head: 2.5M, Wire Lead: 1M, Outlet Dia: 28.5mm(1-1/8"), Dimension: 155*90*115mm.
- ✔Built-in float switch:Compact, automatic, fully submersible electric pump,Built-in float switch! (No separate float switch is needed).
- ✔Long life motor :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
- ✔Durable: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
- ✔No power use until pump is activated by internal float switch (when water level rises).Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
Check Stock
Sump Pump Alarm, Briidea Indoor/Outdoor High Water Septic Tank Alarm with 110dB Loud Alarm and Large LED Indicator, 10ft Level Float Switch, Ideal for Septic Sump Pump Pond Water Tank
- HIGH WATER SEPTIC ALARM: Basement flooding can cost you a lot of time, effort and money. Use our septic tank alarm, through the float switch to detect the water level of your septic, and timely alarm when the water level is too high, protect your house and property from flooding, give you peace of mind then.
- 110 DECIBEL ALARM: With volume alarm and large LED warning light, double protection. The alarm sounds up to 110 dB, you can hear it clearly no matter where you are, thus protecting your basement and home from water damage.
- WEATHERPROOF ENCLOSURE: Are you looking for a high water sump alarm flood alarm that works both outdoors and indoors? The enclosere of our alarm is made of weatherproof components, IP67-rated weatherproof, is not affected by any extreme weather, very suitable for indoor/outdoor use, is your ideal choice.
- ADJUSTABLE DETECT RANGE: The high water alarm system equipped with a 10 ft float level switch and a 6 ft power cord, you can adjust the detect range as needed to minimize damage to your property.
- WIDELY USED: Very suitable for monitoring the water level ....
Check Stock
Honda Power Equipment WSP73 3/4 HP 115V Submersible Water Pump, 50FT Cord New
- 【AUTO FLOAT SWITCH】Equipped with an automatic float switch. When the water level higher than the pump, the pump will start working automatically under the control of float switch. When the pump fails to pump water, it will automatically disconnected the power.If the water level is higher than the pump again,it will work again..
- 【POWERFUL SUMP PUMP】3040 GPH, 1/3 HP, Max Lift: 29 ft.
- Acquaer submersible clean/dirty water pump moves up to 3040 gallons per hour rating tackles any draining job at a fraction of the time. Perfect for water supply, drainage in deep well, field irrigation garden irrigation and greenhouses..
- 【INGENIOUS DESIGN】The higher base plate and top suction design helps eliminate air locks and filters debris. For safety, the pump motor has an automatic thermal protector that will turn off the pump if it becomes too hot automatically. Once the thermal protector detects that the pump has cooled to a safe temperature, it will allow the pump to operate normally..
- 【HIGH-QUALITY MATERIALS】The submersible water pump is made of high-strength, corrosion-resistant reinforced thermoplastic materials. It will provide trouble-free service for a long time when properly installed..
- 【CUSTOMER SATISFYING GUARANTEE】 Acquaer sump pump comes....
Check StockJohnson Pump of America 28552 Marine Pump Cartridge for 500 GPH Motor, Black, one Size
- Switch is removable from the base for easy cleaning..
- Turn pump on when water level reaches 2 (51mm).
- Turn pump off when water level reaches 0.7 (19mm)..
- Long life, switching frequency up to 10 million times.
- Ultrasonic welding, forming a seal, reliable and secure, not leaking..
- Heavy duty flow switch is designed for the toughest applications.
Check Stock
