Categories

Best Water Methanol Injection Kit

AEM (30-3300) V2 1-Gallon Water/Methanol Injection Kit with Internal MAP Sensor

  • Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid.
  • Internally-bypassed water/methanol injection pump does not cycle on/off and provides quiet, smooth operation.
  • it features robust construction including integral hose fittings.
  • Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min) 1 gallon tank with integral conductive low-fluid sensor and positive lock connector.
Check Stock

CarBole External In Line Fuel Pump: 116 PSI High Pressure Unversal 12V Electric Pump Injection Systems Replacement for 0580464070 With Mounting Bracket Clamp (Red)

  • 100% brand new and high quality. Universal external in line fuel pump. Does not need to be mounted inside the tank.
  • Operation Pressure: 5-8bar (72.5-116 psi).
  • Flow Rate-120LPH at 6.0bar (about 31.7GPH at 87PSI).
  • Flow Rate-100LPH at 7.0bar (26.4GPH at 101.5psi).
  • Replaces 0580464070 and others but not OEM. Great for use with Mega Squirt and other aftermarket systems.
  • This pump is used for turbo/non turbo gas fuel injection systems up to 250bhp.
  • this is a universal fit pump and depending on your application some adapting will be required, installation may require skill and knowledge, no instructions are included.
  • Adopted Fuel Injection Molding Technology to upgrade the plastic parts of the product, which makes the fuel pump more durable, corrosion resistance and improve the service life of the pump.
  • Package including: 1pc high flow external fuel pump, 1pc Mounting Clamp, 2pcs rubber connection covers, 2pcs insulated terminals, 2pcs nuts, 2pcs gasket, 1pc bolt for bracket.
  • NOTE: It can only be used for gasoline and diesel, and CAN NOT be used for fuel containing methanol or ethanol, nor is it suitable for pumping water or oil..
Check Stock

Party Essentials UPK-22 22 Piece Party Serving Kit, Includes Chafing Kits, Methanol Fuel and Serving Utensils

  • Serving kit with 22 disposable pieces including 4serving forks, 4 serving spoons, 2 6. 5-inch serving tongs, 2 chafing racks, 2 aluminum water pans, 4 aluminum food pans and 4 gel fuel cans for serving food at parties, barbecues, and other gatherings. Maintain food’s perfect serving temperature for hours..
  • Serving forks, spoons, and tongs are made of polystyrene for rigidity and durability..
  • Aluminum food and water pans for buffet-style serving..
  • Gel fuel cans contain 190g (6. 7OZ) of methanol fuel and burn for approximately 2. 5 hours to help keep food warm..
  • Sturdy wire chafing racks to hold food and water pans over fuel cans, can be reused with our 30 piece refill party kit for your next party..
Check Stock

Klotz Oil Super Techniplate 2T Racing Oil - 1gal. KL-101 by Klotz

  • Identifiable Klotz red...Smells like Klotz.
  • Improves performance and increases horsepower. TechniPlate peak film strength and anti-scuff protection.
  • Extreme load carrying capacity reduces engine wear. Clean Burn technology reduces carbon and residue build-up..
  • Blends with methanol alcohol, ethanol, nitromethane and gasoline. Premix only— not intended for oil injection.
  • Recommended for Beta, Gas Gas, Honda, Husaberg, Husqvarna, Kawasaki, KTM, Suzuki and Yamaha premix off-road applications.
Check Stock

NEW HOLLEY 97 GPH RED ELECTRIC FUEL PUMP WITH BRACKET,STREET & STRIP CARBURETED APPLICATION,COMPATIBLE WITH GASOLINE ONLY

  • Brand New Holley 97 GPH Red Electric Fuel Pump (Part #12-801-1).
  • Features: Tumble polished billet look | Lower housing casting designed for enhanced fuel flow | Maximum pressure is 7 PSI | Motor draws 2 amps current | Relay kit P/N 12-753 & 7 1/2 amp fuse recommended | Constant fuel flow with no pulsation | Improved design for street/strip applications | Not designed to be used on aircraft of any type | Distinctive Red logo | Flows 97 GPH (free flow) | Flows 71 GPH at 4 PSI | Regulator is not required.
  • Has externally accessible pressure relief valve (max 7 PSI) | Rotor/vane pump design is more tolerant of contaminated fuels | Weighs only 2.88 lbs | Not designed or recommended for use with fuel injection systems | Includes mounting bracket | Repair kits are readily available | Can be serviced from the pump end | Not compatible with alcohol or methanol fuels | Use of safety shut-off switch, P/N 12-810, strongly recommended.
  • Specs: Application: Universal | Bracket Color: Silver | Brand: Holley | Emission Code: 5 | Free Flow GPH: 97 | Free Flow LPH: 367 | Fuel System: Carbureted | Fuel Type: Gasoline | Inlet Size: 3/8″ NPT | Material: Aluminum | Motor Finish: Silver | Outlet Size: 3/8″ NPT | Product Type: Fuel Pump | Pump Body Color: Silver.
Check Stock

AFWFilters Platinum 10 air injection iron, sulfur removal filter system

  • Abundant Flow Water, Platinum 10 AIP10-25sxt air injection system.
  • Platinum 10 system, With Filox (Mang-Ox) filter media.
  • Air injection creates pocket of air to super oxidize your water for optimal filtration.
  • Remove iron up to 27 ppm, Sulfur up to 10 ppm, Manganese up to 6 ppm.
Check Stock

Whiskey, Stills, and Hash [Explicit]

  • ...event burnout, and give the distiller better results..
  • Unique design: The stills for distilling comes with four layers of distillation towers with sight glasses to observe the distillation at any time. The white wine vapor fully reacts with the pure copper tower core and distills layer by layer to effectively remove methanol and accurately remove the creosote. It makes the wine clear and refreshing..
  • Multi-function: Our whiskey making kit can not only make wine but also be used for seawater, steam distillation, and alcǒhól at home. According to your preference, you can make alcǒhól, ethanol, distilled water making, essential oil, and so on..
  • 100% Quality assurance: When you purchase a making kit, we will provide you with a 1-year warranty, if there are any problems please feel free to contact us, we will be the first to solve them for you..
Check Stock

Methanol 7-Ounce Entertainment Cooking Fuel, 12 -Pack Gel Chafing Cans

  • Prepare Your Food for Serving: With Methanol 2.5 Hour Chafing fuel cans, you can keep your meals warm for family and colleagues. Methanol Chafing is ideal for catering and large food sets, as well as anyone who wants to keep their meal warm with an easy-to-use, long-lasting flame. It lasts longer than other commercially available chaffing fuels..
  • High Quality Burn: Filled to the brink with gel fuel, Methanol fuel burns up to 2.5 hours, maintaining a clean, steady flame. The Methanol Chafing fuel being made of solid gel, is easy to light and guaranteed leak free..
  • Simple Use: Ready for use right out the box, simply pop open its top can with a flat tool and place the can on a safe surface or a chafing fuel holder. Ignite the gel with a long match or lighter and effortlessly maintain the flame until use is no longer needed. When finished with the product, place the can cap over the flame to restrict oxygen flow. Once the can is sufficiently cooled, store the can for reuse..
  • Ignites Immediately: Unlike other sources of chafing Fuels that use wicks, Methanol Chafing is very easy to ignite and maintain. Simply ignite the gel’s top layer surface to produce a clean, odorless flame..
  • For Multiple Occasion: Methanol Chaffing can be used in diverse situations fro....
Check Stock

VP Racing Fuels Motorsport 5 Gallon Square Plastic Utility Jug Blue & 14 Inch Hose (2 Pack)

  • Intended for racing fuel such as Nitromethane or Methanol that are used in sanctioned motorsports.
  • NOTE: This is not a portable fuel container as described by ASTM, EPA, ARB, and other official agencies.
  • VP Racing 5-Gallon capacity motorsport utility jug can be used to store, carry, and disperse animal feed and attractants, water, and other outdoor products but should not be used as a portable fuel container.
  • Constructed of high-quality, virgin high-density polyethylene that undergoes a 15-point quality test to ensure it can tolerate the roughest treatment.
  • VP Racing 14-inch Deluxe Hose Kit for Motorsport or Sportsman Containers.
  • Forms a water-tight seal with the rubber gasket for secure pouring.
  • Pours quickly and easily thanks to a contoured handle, bottom grip, non-breakable multipurpose cap, and rubber gaskets.
Check Stock

Reign of Fire

  • ...ng set made by CNC precision sizing. Kit includes colour decal. Kit includes large size brass photo etch. Kit includes 3D illustrated step by step instruction..
  • This kit(hull) comes with almost everything that needs to build an RC running model. Kit includes a hull, decks, Injection parts, CNC-sheets, decals, brass photo etch, instructions and other parts for WTC installation. WTC（water tight cylinder）is a sealed cabin that accommodates all machinery and electronic equipment, such as motors, water-Piston, solenoid valve, servo, ESC, ERS, RC, battery etc. WTC supplies submarine the ability of running, diving, and floating..
  • Already Including Double Piston Tank WTC KIT Already including servos,esc,bcu.
Check Stock

GM Genuine Parts 12662756 Driver Side Fuel Injection Fuel Rail

  • What is it: Our Spotgun Oil Injection Kit is the world's most popular and professional injection method.
  • pull the trigger to inject a precise amount of oil into the A/C system and you're done.
  • Superior design: Our kit is designed to provide easy, accurate, and contamination free oil injection.
  • Included: This kit includes the Spotgun injector with R-12 and R-134a hose adapter assembly and a PAG 46 oil cartridge.
  • Compatibility: The 481500 Spotgun is excellent for use with SAE certified A/C equipment.
Check Stock

DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (10') | Best All in One Set with Injectable Filler for Repairing Cracked Foundations, Walls, Basements, Cement Structures

  • NEW, EASY, SAFE: DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (10') contains everything you need to inject, fill, and repair cracks up to 10’ in length — One Tube of DRICORE PRO Concrete Repair Structural Epoxy Injection Resin, One Tube of DRICORE PRO Concrete Repair High Strength Anchoring Epoxy Paste, Two Static Epoxy Nozzles, Ten Ports, Gloves, and Instructions.
  • MULTI-PURPOSE: Our repair pack is made to fill concrete that is cracked, broken, or split. For best results, be sure to follow the instructions closely. Consult a professional if you are not experienced with fixing or repairing concrete..
  • MADE FOR THE TASK: DRICORE PRO Concrete Repair Structural Epoxy Injection Resin Kit (10') is a high strength and water resistant concrete repair set for concrete repair jobs. Versatile enough to use both at home and at work, our industrial strength kit is great for contractors and experienced DIY repairmen doing home projects, basement, garage renovations, and more.
  • COST EFFECTIVE, SIMPLE TO USE: Our repair kit is a relatively cheap but effective way to fix your clients’ concrete structure, apartment, condo, or house. Save both time and money by using our specially engineered and designed repair package for your next project or conc....
Check Stock

Shower System, Shower Faucet Sets Complete with Wall Mounted Shower Fixtures Rough-In Valve Body and Trim Kit (Brushed Nickel)

  • SHOWER KIT INCLUDE：8 inch square rain shower head (Brass), handheld shower (Brass), 16 inches shower arm (Brass), 59 inches shower hose (304 stainless steel), shower holder (brass) and Shower Faucet Rough-in Valve Body (brass).
  • 3-FUNCTION WITH ONE SWITCH: Select between 10" large square overhead shower and hand shower separately or choosing overhead shower+hand shower simultaneously (choose among 3 shower settings with ONE SWITCH). Our shower valve comes with built-in diverter. Ceramic disc diverter valve provides smooth and easy function-switching operations..
  • Air Injection Technology - Save up to 30% on water with the innovative air injection technology, which is also ideal for noise reduction. The water and air mixture is a perfect solution for areas with low water pressure!.
  • Easy to Replace any Shower Trim Kit: flexibility is the big benefit of the universal valve. Once the Rough is installed, future shower function upgrades or style changes can easily be made without altering the Plumbing behind the wall..
  • Any problem with product,pls feel free to contact us. Within 2 years, any product quality problem can be guaranteed free of charge..
Check Stock