Heater Hose Fittings 1\\/2 NPT Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383 Chrome 3\\/4 Water Pump 5\\/8 Intake Mainfold Heater Hose Connector
- Fitment: Heater Hose Fittings Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383.
- Material: Intake & Water Pump Heater Hose Fittings is Made of high-quality Iron, which is durable,scratch resistant, corrosion resistant and impact resistance.
- Features: Our Heater Hose Fittings are a great choice for connecting heater hoses to your water pump and intake manifold.
- Package Includes: (1) 5/8" Fitting x 1.7913" Length With 1/2-14 NPT , (1) 3/4" Fittings x 2.933" Length With 1/2-14 NPT.
- Please check to make sure you need 1/2" NPT Heater Hose Fittings.
Check Stock
Hygger 215 GPH Quick Water Change Aquarium Pump Submersible Fountain Water Pump Fish Tank Pond Drain Transfer Pump with 2 Adaptors
- 【2-IN-1 Water Pump】this submersible water pump works like a charm in terms of aquarium water change, transferring water and powering fountain waterfall.
- 【Low Water Level Draining】Easy to use, simply plug in power for quick water draining, this bottom intake pump can remove water level down to 1/4" and suck out 1/5" debris and fish waste with ease.
- 【Powerful, Quiet Operation】Provides efficient, instant water flow, power: 18W, Maximum flow rate: 215 GPH.
- Max Lift Height: 5.3ft (power cord's length: 6ft).
- 【for Water Transfer Application】Oil-free magnetic driven motor, it is ideal for draining saltwater and freshwater aquarium, pond, fountain, hydroponic, pool, pool cover and hot tub.
- 【Comes with 2 Barb Fittings】Presented two different sizes of barb fittings for desired water flow: 1/2" and 5/8", the thread size that fits ON TO the pump next to the handle is M16-2, which is a metric size.
Check Stock
VEVOR Hot Water Recirculating Pump, 120W 110V Water Circulator Pump, Automatic Start Circulating Pump NPT 3/4\ w/Brass Fittings, Stainless Steel Head, 2 Speed Control for Electric Water Heater System
- Applicable to the duplex apartment,suburban villas,water heater pressurized,household water pressurized, and the solar water heater pressurized. Our water pressure pump especially suitable for water heater pipe pressurization with insufficient water pressure, to prevent water supply from being cold..
- Max Flow Rate: 396GPH(25L/min), Max Head: 49.2ft(15m).
- Liquid temperature range: 0 F- +212 F.the water boost pump with flow switch can automatically adjusts to your needs, Increase the pressure of household water tank and keep a steady pressure..
- Easy installation, only need a wrench to connect the pump, saving you the cost of plumbers.
- the water booster pump is also Energy Saving.
- Powerful 120W Motor, High Quality Water flow switch and full brass fittings included, All-in-one unit to make the water booster pump durable and provide enough water pressure for home use..
- We provide 30 days free return and 3 months fittings parts replacement for our water boost pump.If you have any problems for using our products,feel free to contact with us at the first time,we’ll made you satisfied with your purchase..
Check Stock
ZAOJIAO DC 12V Home Brew Little Pump, Solar Hot Water Circulation Brushless Pump 780L/H 206GPH 5M/16ft Low Noise + 10ft Silicone Tubing Food Grade + ETL Listed DC Power Supply Adapter
- Max lift height: 5m (16ft). 1/2″ Male thread on the pump, the brass hose fittings comes with the pump, the OD of the brass coupler is 3/8”(10mm). Plug type: 2.1mm x 5.5mm female. Entirely waterproof, super long working life (more than 30,000 hours). Brushless Motor, small size, high efficiency, low consumption, low noise..
- ★ Wildly used for home brewing, beer making, recirculating wort, transfer water, hot water circulating, etc. Perfect home brew pump!.
- ★ Silicone Tubing Size. The inside diameter(ID): 10mm(3/8 inch), the outside diameter(OD): 13mm(1/2 inch). The thickness of tube is 1.5mm. Length: 10 ft. Food grade, soft, flexible and durable..
- ★ ETL Certified power supply adapter, safety guarantee. Power source: DC 12V, rated current: 2A. The point straight in line with the pump body is the water inlet, vertical to the pump body is water outlet..
- ★ Circulation pump is non-self-priming pump. Max circulating water temperature: 80℃/176°F, it’s submersible but can’t be immersed in hot water.
- ★ Package includes: 1 x Water pump, 1 x AC 110V- 240V to DC 12V 2A Power Supply Adapter, 1x 10 ft Silicone Tubing, 2 x Brass hose fittings, 2x Hose Clamps..
Check Stock
Water Pressure Diaphragm Pump Industrial 115V, Self Priming Pump 4 Gpm 45 Psi include Power Plug, Fittings Strainer Filter for Kitchen Bathroom RV Marine Yacht Caravan, Garden Hose
- ... ), recommend to turn off the power and wait for the temperature to drop before come into service again. Tip: To avoid leakage to the pump rotor in case of some product failure, the correct operation is to put the pump head down or flat during when installation.
- 【Industrial Workmanship】features industry standard fittings, power plug and aluminum alloy mounting base to directly replace similar common water pressure pump. Please connect all parts closely to avoid leakage or combine seal tape with our pump strainer to better prevent leaks on pipes and plumbing.
- 【Wide Application】Great for use in kitchen and bathroom. It is also the great partner of camper, sprayer, garden sprinklers, fertilizers, sprinkler faucet and agricultural irrigation as you like.
- 【Why You choose Us】High quality home and industrial facility should be available to everyone. You'll get 1 x AC Diaphragm Water Pump, 1 x 1/2 inch Twist-on Water Strainer (includes 50 mesh stainless steel screen), 2 x Hose Fittings, 1 x User Manual, 1 x Box Container.
Check Stock
Seaworks Boat Winterizer Gravity Motor Cleaning Kit - Gravity Flow System DIY Winter Preparation Solution for Marine Engines - For Inboard and Outboard Engines
- Seaworks Boat Winterizer flow system flushes, prepares and protects your boat engine for winter storage. Compatible for inboard and outboard engines..
- Kit includes: antifreeze tank with on/off valve, T-Connector, shutoff valve, braided hose with fittings..
- Fittings designed for uninterrupted antifreeze flow to your engines, cleans impurities and enhances engine performance. Use at regular intervals to improve engine life expectancy..
- Antifreeze(not included) and flusher (not included) required to operate kit, 5-gallons of compatible antifreeze required for boat winterization. Do not use an antifreeze with a burst protection level of less than -50°F..
- For front engine mounted raw water pumps (including most Volvos and inboards) a Front Engine Pump adapter (not included) is needed to connect directly to the suction side of the raw water pump. Do not attempt to to connect directly to the suction side of the raw water pump. Do not attempt to winterize a front engine mounted raw water pump system using this method..
Check Stock
Seaworks Boat Winterizer Gravity Motor Cleaner with Flusher Kit - Gravity Flow System DIY Winter Preparation Solution for Marine Engines - For Inboard and Outboard Engines
- Seaworks Boat Winterizer flow system flushes, prepares and protects your boat engine for winter storage. Compatible for inboard and outboard engines. Flusher included with kit..
- Kit includes: antifreeze tank with on/off valve, T-Connector, shutoff valve, braided hose with fittings, flusher..
- Fittings designed for uninterrupted antifreeze flow to your engines, cleans impurities and enhances engine performance. Use at regular intervals to improve engine life expectancy..
- Antifreeze(not included) and flusher (included) required to operate kit, 5-gallons of compatible antifreeze required for boat winterization. Do not use an antifreeze with a burst protection level of less than -50°F..
- For front engine mounted raw water pumps (including most Volvos and inboards) a Front Engine Pump adapter (not included) is needed to connect directly to the suction side of the raw water pump. Do not attempt to to connect directly to the suction side of the raw water pump. Do not attempt to winterize a front engine mounted raw water pump system using this method..
Check Stock
JASSFERRY Hot Water Recirculating Pump Recirculation System 115V NPT 1\ Circulation Replacement Pumps for Solar Water Heater Boiler Circulating Cast Iron Flange
- 【Specific】: 115V, 60 HZ, 3-speed power 100/70/55 watts, 1/25 - 1/8 HP, up to 20 feet head, max working pressure 10 bar(145 PSI). Max flow 17 GPM. Inner liquid temperature range 36℉-230℉. Power Cord 2.8 ft..
- 【Features】: Pump body made from the heavy duty cast iron. Pumps work efficient, quiet running, low energy consumption, and maintenance-free design: no need to replace mechanical seals or couplers..
- 【Wide Application】: Our recirculation pump is an universal replacement pump, can replace most of hot water recirculating systems, is compatible for solar water heater, boiler and domestic water boost pressure etc..
- 【Easy to Install】: Designed with cast iron flanges and inset check valve. Fittings include 2 Gaskets, 4 Bolts, 4 Nuts. Use the universal adjustable wrench connect the pump to the pipework..
- 【5 Years Warranty 】: Our recirculation pumps reach the Class H insulation & IP44 protection. We offer 5-year warranty period for all our pumps. Questions like missing fittings, contact us directly for assistance. We will provide support as soon as we could..
Check Stockmistcooling 160PSI Misting Pump (220 V-AC)
- Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
- Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
- Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
- Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check StockRed Lion RL-SPRK150 115/230 Volt, 1.5 HP, 71 GPM Cast Iron Sprinkler/Irrigation Pump with Thermoplastic Impeller, Red, 97101501
- BUILT TO LAST: Rugged cast iron pump housing and glass-filled thermoplastic impeller for well water and lake water.
- pump is factory set at 230 Volts but can be easily switched to 115 Volts.
- always match the pump's voltage to the source voltage.
- ONE-TIME PRIMING: No additional priming is required after initial fill.
- follow the priming instructions in the owner's manual.
- UP TO 71 GPM at 10 PSI: 44 GPM at 30 PSI - can handle up to 14 sprinkler heads with 1/2-inch fittings or 7 sprinkler heads with 3/4-inch fittings in each zone.
- SPECIFICATIONS: 1.5 HP, 115/230 Volts, 2-inch Female NPT threaded intake.
- 1.5-inch Female NPT threaded discharge, Max pressure 44 PSI.
Check Stock
Hydrofarm AAPW400 Active Aqua 400 GPH Submersible Hydroponic Pond Aquarium Water Pump (2 Pack)
- PROFESSIONAL PUMP: The water pump is designed for ponds, water gardens, fountains, statuary hydroponics, and other water features. Features dual-functioning options of inline or submersible.
- STRONG AND DURABLE POWER: High-efficiency pump is oil-free and environmentally friendly with output pressures of 3.2 PSI and has a powerful mag drive construction. Built with a ceramic shaft and is suitable for saltwater operations.
- WATER FLOW CONTROL: Includes an adjustable knob to control the water flow rate, so you can get just the amount of water pressure you want. Maximum flow rate: 400 gallons per hour and is recommended for 40 gallon reservoirs.
- WIDELY APPLIED: Multiple hose fittings for versatility and the intake aeration kit allows you to naturally oxygenate your water. Use this pump indoors or outdoors and the BPA-Free pump is safe for aquaponic use.
- INCLUDES: Includes removable foam filters, impellers, rubber mounting feet to reduce vibration and lengthen pump life, 6-foot heavy-duty power cord, and pump which is 4.5 pounds with 120VAC/24W.
Check StockNorthern Brewer Stainless Steel Counterflow Wort Chiller
- Chill your wort like the professionals do!.
- A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort..
- Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required..
- Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings..
- Low Flow Restriction: Gravity feed your wort or use a pump. The choice is yours!.
Check Stock
Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator PETG Hard Tube Water Cooling Kit CL-W243-CU12SW-A
- Analog/digital lighting Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync.
- All included the C360 hard tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop.
- Slim copper radiator the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis.
- C pro fittings build like a Pro with a new take on compression fittings. Engineered with four Built in O rings to provide maximum leak prevention and a secured compression seal.
- Exclusive components W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15 ddc pump/reservoir combo.
Check Stock
