Categories

Best Water Taps

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • ...te steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
  • The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, which is the best choice for through-hole processing. Standard tooth spacing, no bad teeth, no burrs, making repair and maintenance a breeze. Slotted in the front section, chip removal in the upper phase, easy to repair, through holes and blind ho....
Check Stock

Vitapur Top Load Floor Standing Room Cold Standard Taps, White water dispenser, one size

  • Dual taps for cold and room temperature dispensing.
  • High efficiency compressor for improved cooling.
  • Stainless steel reservoirs for superior long-lasting reliability.Never use harsh chemicals or abrasive cleaners.
  • Room & cold water dispensing through dual taps.
  • For use with 3 & 5 gal (12 & 19 Liter) water bottles or Vitapur Water Dispenser Filtration System (GWF8).
Check Stock

Goodcorner Faucet Aerator 1.8 GPM 360° Swivel Angle Kitchen Sink Water Saving Tap Aerator Adjustable 2 Spray Function Soft Bubble Stream/Strong Sprayer 15/16 Male Thread/Brushed Nickel

  • One Button 2 Water Modes - By pressing a button, convert soft bubble stream to strong spray..
  • NO Splash - This unit produces a champagne effect flow that negates any splash back in the basin at the same time increasing wetting ability and....
  • Simple Installation - Directly installed by hand without tools,done in seconds.Including the different sizes of gaskets,so you can directly install it....
  • Fits 99% Taps - Fits all standard taps with M22 external thread and internal thread M24 - gasket included Features: Save energy: Water saving 30%~70%....
  • Guarantee --- 30 days money back. Suitable for 99% kitchen or bathroom taps. IF IT CANNOT FIT YOUR FAUCET OR HAVE ANY PROBLEMS PLEASE SEND US EMAIL,....
Check Stock

KYLL Hot and Cold Bottled Water Cooler, Table Water Dispenser Cooler, Electric Desktop Water Machine, for Offices and Meeting Rooms

  • ❀ Two styles: Hot type, Provides room temperature and boiling water instantly. Hot and Cold type, Provides chilled, room temperature, and boiling water instantly. Back heating and cooling switch, Once pressed, it can under normal heat operation, simple and convenient..
  • ❀ User-Friendly Design: features a manual on/off switch and power indicator light, plus automatic power-off, dry burning protection, overheating protection, added safety.
  • ❀ Push Lever Taps: Push lever taps are made of durable ABS material, designed for frequent use and are easy to use and clean.
  • ❀ Automatic Heat Preservation: Stainless Steel inner container heat quickly, convenient and practical. After the water boils, it automatically enters the heat preservation state and provides you with hot water at any time..
  • ❀ Support water bottle – water dispenser stand can hold Round water bottle capacity around 5L to 19L maximum, item don’t include water jug. Designed to sit on a countertop or table top..
Check Stock

Lisle 70500 Tap Socket Set

  • For Use in Restricted Areas. Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2". Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards. Sockets contained on a vinyl holder..
  • Ideal for use in areas where a T handle won't fit..
  • Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2"..
  • Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards..
Check Stock

Lisle 83100 External Torx Plus Socket Set, 9pc

  • For Use in Restricted Areas. Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2". Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards. Sockets contained on a vinyl holder..
  • Ideal for use in areas where a T handle won't fit..
  • Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2"..
  • Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards..
  • Ideal for use in areas where a T handle won't fit.
  • Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2 inch.
Check Stock

uxcell Metric Machine Tap M12X1.25mm H2 HSS Uncoated 4 Straight Flutes Thread Tapping DIY Tool 2pcs

  • Thread Size: M12X1.25mm. High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
  • Can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications..
  • Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping..
  • Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading..
  • The taper taps can be applied for threading machine and electric drills, use to cut thread inside hole, creating a female surface which functions like a nut..
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ... | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, ma....
Check Stock

Houzer VITPO-664-BN Vitale Pull Out Kitchen Faucet, Brushed Nickel

  • Package including: 12 pieces faucet filter cache aerator of Male 16.5mm/ 18.5mm /21.5mm /24mm and meet your different faucet sizes needs. 6 pieces cache aerator wrench tools for removing and install different sizes of cache tap aerator..
  • Easy to installation: Faucet filter replacement comes with wrench tools which allow you to complete removal and installation in minutes. No need to have a plumber. You can done it within 1 minutes..
  • Made of high quality ABS material : Cache faucet aerator keys are made of durable ABS, strong and sturdy. Long-lasting and won’t easily break..
  • Wide application: Flow restrictor insert faucet aerators can be fitted to kitchen sink faucets, bathroom taps and lavatory faucets spout head, Compatible with Neoperl, Moen, Kohler, American Standard, Danze, and Groche Cache Aerators..
  • Non-Splashing: These mixer faucet aerators mix the water and air well to create lots of bubbles and restrict the flow of water from taps without reducing water pressure. Prevent water splashing and saving water. Great faucet aerator tool set to replace or clean the blocked aerators, effectively fix the low flow faucet and gives you smooth flow again..
Check Stock

Hegebeck Thread Milling 3/8-16 Thread Taps Extrusion Taps H2 Thread Drill Thread Milling Plug for Manual Equipment Special Processing Consoles 1 Pcs

  • Thread Size: M4 x 0.7mm. High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
  • Can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
  • Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping..
  • Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading..
  • The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing..
Check Stock

DECARETA Ceramic Stem 20 Teeth Ceramic Disc Cartridge G1/2

  • High Quality: Made of brass and ceramic, strong and durable perfectly, no more dripping taps and it can be used long time.
  • Size:The product is 53mm long and here are 20 gears on the top of the valve core 20 gears are 7.6mm, inner diameter is 4mm,The faucet spool is the most common size, suitable for 75 percent faucet, please read the size picture carefully before buying.
  • Easy to Install:1 screw driver and 1 spanner can do the job perfect.Easy to turn and no drips.
  • Widely Used: Universal size, suitable for 75% tap. Can be used for single or double hot and cold water taps.Great for bathroom, kitchen.
  • Full Set: 2 pack of tap cartridge(1*Blue&1*Red),suitable for cold and hot water,with 2*4mm screws.Please view the size picture carefully before purchasing.
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • ... | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, ma....
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock