Best Water tight Locknuts
Klein Tools D333-8 Conduit Locknut and Reaming Pliers
- Pliers tighten 1/2-Inch (13 mm) and 3/4-Inch (19 mm) EMT or 1/2-Inch (13 mm) rigid locknuts.
- Reams and smoothes both inside and outside of conduit.
- Knurled jaws at nose tip pull wire or fish tape and machined nose fits snugly into locknut wings.
- Forged in the USA with custom, US-made tool steel for maximum durability.
Check StockGardner Bender LNW-KIT Locknut Wrench Kit, ½ & ¾ Inch., Loosen / Tighten locknuts, Steel Construction fits UL locknuts, 2 Pk. Bundle, Black
- Locknut wrench solves the problem of tight spaces and fits the majority of UL locknuts.
- Etched markings allow for easy identification.
- clearly marked tighten and loosen ends make usage a breeze.
- Thin design allows easy maneuvering in tight locations while durable steel construction makes it strong enough to get the job done.
- Hooked tip latches onto locknut and maximizes turning leverage.
- Kit contains one ½ inch wrench (LNW-500) and one ¾ inch wrench (LNW-750).
Check StockGlvaner (10 Sets) M10-1.5 x 25mm Thread Length Flat Round Head Socket Head Cap Screws with Hex Locknuts 304 Stainless Steel Furniture Screws Projects
- Package Includes: 10 Pcs M10 Screws and 10 Pcs M10 Hex Locknuts.
- Material: 304 stainless steel (A2) and no exterior finish, greater strength and corrision resistance performance than regular stianless steel or zinc plated fasteners..
- Included 10 pcs free same size M10 Hex Locknuts to help save your time and money to find nuts.The locknuts are also made of 304 stainless steel and could be found seperately in our shop for your needs..
Check StockPerformance Tool W89314 1/2-Inch Drive Wheel Bearing Lock Nut Socket Set 7-Piece
- Hex Locknuts Sizes Contains One Each: 2-3/8", 2-1/2" and 55mm.
- Rounded Locknuts Contains One Each: 2-1/2", 2-3/4", 2-9/16" and 2-3/8".
Check StockComie Motorcycle Tour Tail Box Trunk Luggage Top Lock Storage Carrier Case w/soft backrest&handle - 48L Capacity - Can Store Helmet White
- The trunk (measurements: 22.3" L x 17.3" H X 12.6" W)is extremely spacious and will hold two helmets. Saddlebags Color: Black / White / Silver /....
- Our trunk has 48L large capacity space and comes with a soft backrest. Comes with mounting hardware as shown in the picture. And it is lockable with 2....
- Easy to install: It comes with all the mounting hardware kits..
- This size of Top Case is recommended for Motorcycles. (Note: These screws should not be tightened too tightly. They're locknuts. If it's too tight,....
- Box Comes With All Hardware To Mount Into A Luggage Rack. It is very convenient with handle to take it out or anywhere you want to go..
Check StockComie Motorcycle Tour Tail Box Trunk Luggage Top Lock Storage Carrier Case w/Soft backrest&Handle - 48L Capacity - Can Store Helmet
- The trunk (measurements: 22.3" L x 17.3" H X 12.6" W)is extremely spacious and will hold two helmets. Saddlebags Color: Black / White / Silver / Black&Gray..
- Our trunk has 48L large capacity space and comes with a soft backrest. Comes with mounting hardware as shown in the picture. And it is lockable with 2 keys. (NO luggage rack!!!).
- Easy to install: It comes with all the mounting hardware kits..
- This size of Top Case is recommended for Motorcycles. (Note: These screws should not be tightened too tightly. They're locknuts. If it's too tight, the base will be damaged due to the external force.).
- Box Comes With All Hardware To Mount Into A Luggage Rack. It is very convenient with handle to take it out or anywhere you want to go..
Check StockComie Motorcycle Tour Tail Box Trunk Luggage Top Lock Storage Carrier Case w/soft backrest&handle - 48L Capacity - Can Store Helmet (Gray)
- The trunk (measurements: 22.3" L x 17.3" H X 12.6" W)is extremely spacious and will hold two helmets. Saddlebags Color: Black / White / Silver / Black&Gray..
- Our trunk has 48L large capacity space and comes with a soft backrest. Comes with mounting hardware as shown in the picture. And it is lockable with 2 keys. (NO luggage rack!!!).
- Easy to install: It comes with all the mounting hardware kits..
- This size of Top Case is recommended for Motorcycles. (Note: These screws should not be tightened too tightly. They're locknuts. If it's too tight, the base will be damaged due to the external force.).
- Box Comes With All Hardware To Mount Into A Luggage Rack. It is very convenient with handle to take it out or anywhere you want to go..
Check StockIndependent Skateboard Hardware 1\ Phillips Black/Red 8 Nuts and Mounting Bolts
- Includes 8 axle washers and 4 axle nuts from Dimebag Hardware..
- Speed washers increase speed and promote longer bearing life by reducing friction between the bearing and axle nut and hangar..
- Having brand new lock nuts will keep your wheels from falling off. The more you replace your wheels and bearings, the more the axle nuts wear out and lose their ability to stay tight. These fresh new nuts will keep you locked up! Produced with top quality materials. The thread size for these axle nuts is 5/16"..
- This kit features products that are the standard size and will fit on all skateboard/longboard trucks that have 8mm axles (virtually every truck has the standard 8mm axle size)..
- The 4 locknuts and 8 washers included are enough to outfit 2 trucks..
Check StockComie Motorcycle Tour Tail Box Scooter Trunk Luggage Top Lock Storage Carrier Case with soft backrest and Quick-release System - 32L Capacity - Can Store 1 Full Helmet Red
- The trunk (measurements: 16.5" L x 16.3"W X 11.8" H)is extremely spacious and will hold one full-size helmets. Saddlebags Color: Black / White /....
- Our trunk has 32L capacity space and comes with a soft backrest and quick-release system. This size of Top Case is recommended for small to mid size....
- Easy to install: It comes with all the mounting hardware kits. Comes with mounting hardware as shown in the picture. And it is lockable with 2 keys..
- This size of Top Case is recommended for Motorcycles. (Note: These screws should not be tightened too tightly. They're locknuts. If it's too tight,....
- Box Comes With All Hardware To Mount Into A Luggage Rack. It is very convenient with handle to take it out or anywhere you want to go..
Check StockEZ-FLO 40079 Touch Flush Valve for Eljer Toilets White
- WRENCH WIDTH: about 8cm 3.15 inch. Lever length: about 21 cm 8.3inch This Modern metal lever wrench will help your toiletcan add a new stylish touch....
- DURABLE MATERIAL: Metal Plating Wrench + Copper Lever This is highly durable handle arm construction. It features a copper finish handle with Metal....
- EASY INSTALLATION: Side Mount Toilet Lever Handle, suitable for TOTO Kohler Toilet Tankhe sturdy handle is durable construction and easy to install.....
- FUNCTIONAL HARDWARE: This Side Mount Toilet Lever Handle is suitable for Square mounting holes,flush lever locknuts have a reversed screw thread,....
- FUNCTIONAL FOR HOMEUSE: This Side Mount Toilet Lever Handle is suitable for Square mounting holes,flush lever locknuts have a reversed screw thread,....
Check StockComie Motorcycle Tour Tail Box Scooter Trunk Luggage Top Lock Storage Carrier Case with soft backrest and Quick-release System - 32L Capacity - Can Store (1) Full Helmet (Black)
- The trunk (measurements: 16.5" L x 16.3"W X 11.8" H)is extremely spacious and will hold one full-size helmets. Saddlebags Color: Black / White / Red..
- Our trunk has 32L capacity space and comes with a soft backrest and quick-release system. This size of Top Case is recommended for small to mid size scooters..
- Easy to install: It comes with all the mounting hardware kits. Comes with mounting hardware as shown in the picture. And it is lockable with 2 keys..
- This size of Top Case is recommended for Motorcycles. (Note: These screws should not be tightened too tightly. They're locknuts. If it's too tight, the base will be damaged due to the external force.).
- Box Comes With All Hardware To Mount Into A Luggage Rack. It is very convenient with handle to take it out or anywhere you want to go..
Check StockCanopy Kit for Chandelier, 5 1/8 Ceiling Lighting Modern Steel Canopy Kit Light Fixture Cover Plate, Hook & Cord Holder for Pendant Lighting Fixtures (Brushed Nickel )
- Canopy size 5-1/8"x 1" includes wire clasp and hook.
- two pendants use options, you can choose to use rope, or chain are designed in 25 lbs..
- 5-1/8"Canopy kit can be used in DIY pendant lights, chandeliers, ceiling lighting and Wall Lights replacements or updates to canopies..
- Design: 5-1/8"Canopy can cover most Ceiling Outlets.
- Metal Cord Holder, the current popular cord light standard.
- Hook can directly hang chain light or other..
- Get a new replacement with any quality problem, 24 hours online service..
Check StockChain Link Fence Gate Wheel for Metal Tube Swing Gate - 6' Hot Galvanized Heavy Duty Gate Wheels for Cattle Fence Gate, Tooltriz
- 【High support weight】An actual high-strength fence gate wheel with the capacity of 550 pounds. The wheel's width and curved rim make it adaptable to all kinds of roads, gravel road, dirt road, and cement road..
- 【Good structure】The tire is real solid rubber with good elasticity and quiet function. Bearings are standard ball bearings, bearing capacity and service life are much higher than other bearings..
- 【Hot-dip galvanized thick frame】The wheel frame adopts new technology, high strength, and hot-dip galvanized.
- longer rust prevention time. In addition, the steel plate is more thikcer than ordinary products..
- 【Standardized chain link fence parts】After a few years, it is easy to buy and find accessories if the bearing or wheel is damaged, save you money..
- 【Stainless steel bolts with locknuts】This gate wheel adopts Stainless steel bolts and stainless steel locknuts. Therefore, there will not happen the gate wheel can't disassemble because of rust..
Check Stock