Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover
- 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
- 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
- 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
- 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while....
Check Stock
Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool
- 【6-in-1 Solder Removal Tool】: 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
- Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
- 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
- ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
Check Stock
Teenitor Solder Sucker Desoldering Vacuum Pump Solder Removal Tool 3pcs/Pack Desoldering Pump Soldering Sucker Tool
- UNPARALLELED SUCTION POWER - Good little solder sucker, have a good bit of suction,you can just hang onto it and use your thumb to reset and suck. The ideal tool for intricate soldering jobs..
- ONE-HANDED OPERATION - Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily. Say goodbye to tedious two-handed solder extraction and .quickly and easily removing solder.
- DURABILITY AND LONGEVITY - Very sturdy,will worke good to remove existing solder from a circuit board. Made with high-quality materials and designed to withstand heavy usage, our Solder Sucker ensures longevity and performance, saving you time and money in the long run..
- ERGONOMIC DESIGN - Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering. The comfortable, non-slip handle and lightweight body make our Solder Sucker easy to handle, ensuring maximum control and precision..
- VERSATILE APPLICATIONS - A must have excellent solder sucker which fits nicely in your tool box. Our solder sucker desoldering pump is not just limited to soldering. It can also be used for desoldering, removing hair, lint, and dust, and even for cleaning delicate electronics. The ultimate multi-purpose tool for any DIY enthusiast..
Check Stock
PackageZoom 20 inch x 1000 Feet Stretch Wrap with Handle Clear Stretch Film 4 Rolls
- INCLUDES: PackageZoom 4 Rolls x 1000 Feet Each: 70 Gauge Pallet Shrink Wrap with Extended Core. 20 inches high performance stretch film is used to protect products and to hold them down onto pallets for storage and shipping..
- PROTECTION DURING TRANSIT: 20 inch stretch film can be applied by hand to secure loads onto pallets keeping the contents safe and contained while moving pallets around warehouses, enabling easier and safer loading, delivering and storage. 4 Rolls Stretch Shrink film is ideal for wrapping and protecting goods while in transit..
- EXTENDED CARDBOARD CORES FOR EASY APPLICATION BY HAND: Pallet wrap on extended cores allows the film to be applied by hand using the cardboard cores..
- FLEXIBLE AND RESISTANT: Our stretch and shrink wrap to be incredibly flexible and resistant, but ensure that they still remain extremely durable. For added ease of use, all our hand stretch films have a strong, extended cardboard core to make your wrapping experience smooth..
- Same Day Shipping: Orders must be placed by 2pm EST Monday through Friday..
Check StockRain Barrel Stand Made From Reclaimed Wood FREE SHIPPING!!!
- FIts our Rain barrel and most competitors rain barrels.
- Made to last out of good used wood 2x4 and pallets.
Check Stock
3 Pcs Solder Sucker Desoldering Vacuum Pump Solder Removal Tool
- 【High Quality and Powerful Sunction】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively and you can use your thumb to reset and suck..
- 【One-Handed Use Design】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
- 【 Sturdy and Perfect Tool】Worke good to remove existing solder from a circuit board, heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering..
- 【Great Solder Removal Tool】 The solder sucker can be used for broad place, a must have excellent solder sucker which fits nicely in your tool box..
- 【Lifetime Satisfaction Guarantee】If you're not happy we're not happy! If we can't make it right and you are not satisfied for any reason, we will gladly and promptly refund your purchase price. We promise! Click "Add to Cart" now..
Check Stockyzc Rosin core solder-Solder wire 63-37 Solder flux, Electronic solder, diameter 1MM, net weight 20G, portable storage tube, suitable for electronics, circuit boards, ICs, etc. DIY(Rosin core solder)
- 【rosin core solder wire:】Solder flux solder wire with special formula of high-quality tin ingots from Yunnan, China and high-quality rosin..
- 【Tin wire parameters:】 rosin solder wire Tin 63%- Lead 37% (Sn63-Pb37)..
- 【Soldering wire specifications:】rosin flux content 1.8%, rosin solder wire 1.0mm (0.0394inch), 20 gm (0.044lbs), gross weight 28 gm (0.0617lbs),Tin pen is suitable for carrying in a pocket..
- 【Low melting point:】 361F/183C. Easy to solder, smooth flow, fast soldering speed and firm solder joints..
- 【Electronic solder Application:】Rosin core solder wire for-solder for electronics Have Very good soldering ability, especially the repair of electrical equipment such as circuit boards,electronics，IC, home improvement, cable TV, radio/sterro,toys etc DIY..
Check Stock
ATERET Band Strapping Kit - Steel Strapping 3/4 Width 0.023 Tensioner Crimper Banding Cart & 5,000 ct Open Seals
- Steel Banding - Our 3/4" Width, 0.023" steel strapping is a strong and reliable strap that provides high shock resistance during delivery. Applications include securing packaged glass, wide loads, wood shipping containers, and securing irregular loads to pallets. Perfect choice for heavy duty loads that require high strength restrain.
- Strapping Tensioner - Our tensioner is a manual tensioner that is easy to use, lightweight, and great for uneven surfaces. Most used for industrial strapping and household packaging. Applications include securing goods for transport, pallets, and warehouses loads..
- Strapping Crimper: Our commercial grade hand crimping tool is easy to use, lightweight, and great for uneven surfaces. This hand sealer is ideal for crimping and sealing to create a solid banding connection. Most used for thick packaged materials, securing goods for transport, pallets, and warehouses loads.
- Banding Cart - Our banding cart is portable and provides easy dispensing of steel strapping or banding..
- Steel Strapping Kit: Steel Strapping, 3/4" Width, 0.023", Tensioner, Crimper, Banding Cart & 5,000 ct Open Seals. The kit also comes with a pair of safety glasses and safety gloves..
Check Stock
Stahl Tools SSVT Variable Temperature Soldering Station
- [HIGH PRECISION & LARGE POWER]: The solder station has large power and high precision. Power: 60 watts, temperature adjustment range: 194°F 896°F / 90°C 480°C, temperature stability: ±2°F / ±1°C. It’s fast heating up and takes only 6 seconds to reach the melting point of 392°F solder wire. It’s perfect welding equipment..
- [FEATURES]: Anti-static design & ESD safe, LED display, PID temperature control technology, fast heating, sleep mode & wake function, °C/°F conversion function, indicator for tracking temperature and temperature compensation, digital temperature correction, reusable ceramic core. Ergonomic solder iron handle..
- [LONG WORKING LIFE]: Protective cord shield, silicone heat shield, and reusable soldering iron extend the service life. Internal 60 watts thermal ceramic soldering iron heater, welded firmly, long service life, easy to replace and purchase. Stainless steel soldering iron prevents accelerate aging of materials for high temperature work, improve heat dissipation and prolong heater life..
- [SOLDERING KIT INCLUDED]:60-watt digital soldering station with side-mounted solder roller holder (removable), built-in soldering iron holder to ensure soldering iron safety, cleaning Sponge to remove solder residue for future use, 2....
Check StockUltra-Thin Solder Wire 0.01in (0.3mm) Rosin Core Flux 2.5, Lead Free Solder Wire Sn99 Ag0.3 Cu0.7 Flow 50g Electronics Soldering Electric Solder
- ULTRA-THIN- the solder wire diameter is just 0.01inch, designed to solder the tiny component, just enough to add enough solder on those small MSD pads.
- LOW MELTING POINT- solder fast melting at 419F ( 217 Deg.C), suitable all soldering tools.
- IMPROVED SOLDER- this 0.3mm solder wire content high quality allow Sn99 Ag0.3 Cu0.7, provides excellent conductivity, eliminate soldering issue, reduce labor cost.
- APPLICATION- good for fine solder work, soldering for electronics equipment.
- LEAD FREE- Unlead solder, excellent performance for electric soldering project.
Check StockFlow Rack Conveyor Rails | Flow Rail 5′ Long Skate Wheel Conveyor | T4 Style
- Flow rack rails with Heavy Duty powder coated steel construction - 260 pounds per foot load rating.
- Made in the USA by Ultimation Industries, LLC.
- Quickly create your own flow rack system for cartons, pallets and totes.
- Cut to length and mount where needed to enable pallets and other items to flow smoothly.
Check Stock
VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1
- Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!.
- Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily.
- The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free.
- Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up.
- The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!.
Check StockConveyor Rails | Flow Rail 5′ Long Skate Wheel Conveyor | T2 Flow Rack System
- Heavy Duty powder coated steel construction - 223 pounds per foot load rating.
- Made in the USA by Ultimation Industries, LLC.
- Quickly create your own flow rack system for cartons, pallets and totes.
- Cut to length and mount where needed to enable pallets and other items to flow smoothly.
- Available in various sizes and styles. SKU: UCR2-5, MPN: UIUCR2-5.
Check Stock
